• 청정기술
• /
• 제20권3호
• /
• pp.277-282
• /
• 2014

본 연구에서는 EVA를 바인더로 사용하여 우레탄 폼(PU)에 LMO를 고정화한 PU-LMO를 제조하였다. XRD 및 SEM 분석을 통해서 EVA에 의해 LMO가 폴리우레탄에 잘 고정화된 것을 확인할 수 있었다. PU-LMO를 제조시에 EVA/LMO의 최적비율은 0.26이었다. PU-LMO에 의한 리튬이온의 흡착 속도는 유사 2차 속도 모델식에 잘 부합하였다. 평형실험 데이터는 Langmuir 흡착 등온식에 잘 적용되었으며, 최대 흡착량은 17.09 mg/g이었다. PU-LMO는 리튬이온에 대한 분배계수($K_d$)가 다른 금속들의 $K_d$ 값에 비해 높게 나타나 뛰어난 리튬 이온 선택성과 높은 흡착량을 보였다.

• 공업화학
• /
• 제20권1호
• /
• pp.52-61
• /
• 2009

본 연구에서는 2액형 아크릴 우레탄 도료에 있어서 바인더로 사용되는 하이솔리드 아크릴 폴리올 수지를 개발함에 있어서 핵심요소인 반응 개시제로 TAPEH (t-amyl peroxy 2-ethyl hexanoate)를 선택하였다. 그리고 하이드록시 모노머는 Tone M100 (caprolactone acrylate), 4HBA (4-hydroxy butyl acrylate), 2HEMA (2-hydroxy ethyl methacrylate)를 사용하였다. 앞의 물질을 2액형 아크릴 우레탄 도료용으로 응용함에 있어서 적용성과 VOC 저감을 위하여, 알리파틱 폴리이소시아네이트 경화제 종류에 따른 반응성과 도막물성을 검토하였다. 또한 최근 주석계 촉매의 사용 억제에 따라 저독성 금속촉매와의 반응성 및 물성도 비교 시험하였다. 이상의 결과로부터 2액형 하이솔리드 폴리우레탄 수지 도료의 응용에 필요한 기초자료 확보로 도막물성과 작업성 개량 및 친환경 도료개발에 효과적으로 응용 할 수 있는 것을 검토하였다.

• 공업화학
• /
• 제31권3호
• /
• pp.284-290
• /
• 2020

Energetic thermoplastic elastomers (ETPEs) based on glycidyl azide polymer (GAP) and carboxylated GA copolymers [GAP-ETPE and poly(GA-carboxylate)-ETPEs] were synthesized using isophorone diisocyanate (IPDI), dibutyltin dilaurate (DBTDL), 1,4-butanediol (1,4-BD), and soft segment oligomers such as GAP and poly(GA-carboxylate). The synthesized GAP-ETPE and poly(GA-carboxylate)-ETPEs were characterized by Fourier transform infrared (FT-IR), gel permeation chromatography (GPC), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), universal testing machine (UTM), calorimetry and sensitivity towards friction and impact. DSC and TGA results showed that the introduction of carboxylate group in GAP helped to have better thermal properties. Glass transition temperatures of poly(GA-carboxylate)-ETPEs decreased from -31 ℃ to -33 ℃ compared to that of GAP-ETPE (-29 ℃). The first thermal decomposition temperature in poly(GA_0.8-octanoate_0.2)-ETPE (242 ℃) increased in comparison to that of GAP-ETPE (227 ℃). Furthermore, from calorimetry data, poly(GA-carboxylate)-ETPEs exhibited negative formation enthalpies (-6.94 and -7.21 kJ/g) and higher heats of combustion (46713 and 46587 kJ/mol) compared to that of GAP-ETPE (42,262 kJ/mol). Overall, poly(GA-carboxylate)-ETPEs could be good candidates for a polymeric binder in solid propellant due to better energetic, mechanical and thermal properties in comparison to those of GAP-ETPE. Such properties are beneficial to application and processing of ETPE.

• 한국건설순환자원학회논문집
• /
• 제4권4호
• /
• pp.105-110
• /
• 2009

본 연구에서는 고가의 실리카흄의 대체재로 활용가능한 메타카올린, HMBA의 치환율에 따른 고강도모르타르의 유동특성 및 역학특성에 대하여 비교 분석하여 그 성능을 규명하여 실리카흄의 대체재로 활용가능성을 위한 기초자료를 제시하고자 하였다. 본 연구의 유동특성 및 역학특성 실험결과 굳지않은 모르타르에서 목표 플로우를 도달하기 위하여 치환율이 커질수록 고성능감수제의 첨가량이 증가하였으며, 공기량은 치환율이 증가할수록 감소하는 경향을 나타냈다. 또한, 역학특성에서 압축강도, 인장강도, 휨강도에서는 Plain보다 실리카흄과 메타카올린 HMBA을 치환한 배합이 강도가 높았으며, 치환율이 커질수록, 재령이 증가할수록 압축강도는 증가하는 경향을 나타냈으며, 각각의 혼화재를 치환한 배합의 강도는 큰 차이를 나타내진 않았지만, HMBA보다 실리카흄과 메타카올린을 치환한 배합이 강도가 다소 높은 경향을 나타냈다. 따라서, 메타카올린과 HMBA를 첨가한 모르타르의 유동특성 및 역학특성을 비교 분석한 결과 고가의 실리카흄의 대체재료로 활용가능성을 확인 할 수 있었다.

• 한국의류산업학회지
• /
• 제6권6호
• /
• pp.810-814
• /
• 2004

This study is one of the fundamental researches for the development of future smart clothing and textile products using silver(Ag) nano powder. Our study was focused on the blocking or insulating effects of nano-processed textiles from electromagnetic waves. Also, for the surveying of the actual effect to human body, we measure the variation of electroencephalogram which is an indication of human physical symptoms. Among various textiles in this experiment, nano silver processed case has shown the best blocking performance from the electromagnetic waves, which decreases depending on the distance. As a reference model of working environment, we setup the visual stimuli object on the computer that is a source of electromagnetic wave. The power spectrum distribution and the incidence of electroencephalogram was measured. The analysed data has shown that, with nano-processed textiles, ${\beta}$ wave does not appear very often where ${\beta}$ wave appears only to illustrate the stable states of human's body. However, as for the materials without nano processing, the ratio of ${\gamma}$ waves in the total level of electroencephalogram becomes higher in spite of short exposure to visual stimuli in work environment, which shows that the worker becomes stressed. The ${\beta}$ wave electroencephalogram of all materials is drawn in calcarine fissure of occipital lobe to show the convergent distribution, and stronger with block-processed Nano Silver Silk(NSS). The study based on the potential risks of human diseases such as physical fatigue by electromagnetic waves, and has shown that the application of Nano Silver textile for human uses require a proper particle size of it which would not penetrate cellular tissues, and a proper binder and binding treatment for it. However, it is highly required for back-up researches to verify various aspects in applying nano silver to textile products.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2007년도 춘계학술논문 발표대회
• /
• pp.25-28
• /
• 2007

In this study we measured the changes according to time respectively on the basis of 0, 30, 60 and 90 minutes, taking into consideration the decline in fluidity of concrete according to elapsed time to analyze manufacturing capability of batcher plant according to elapsed time of ready-mixed concrete manufactured in batcher plant, and offer basic data for mixture design of ultra-high strength concrete. The proportion of water-binder was 23.55, water content was 160kg/m3, proportion of replacement of crushed sand was 0, 20 and 40% at 3 level, and we applied to the same condition of triaxial component using blast furnace slag powder and silica fume as admixture. And to meet the demand of certain fluidity, we measured respectively on property before and after hardening of ultra-high strength concrete using superplasticizer. As a result of experiment, before hardening of ultra-high strength concrete showed the best fluidity in conditions of crushed sand replacement rates of 20% and superplasticizer composition of 1.95%, but it appeared that fluidity drops as time goes by in the same composition condition. And it appeared that when it comes to hardened, the changes of compression strength according to elapsed time by crushed sand replacement rates were within 1MPa. Therefore, it turned out that the difference of strength according to elapsed time was low and compression strength of 280dys in composition mentioned above appeared highly as 88MPa.

• 콘크리트학회논문집
• /
• 제17권2호
• /
• pp.293-302
• /
• 2005

This study describes data from determination of the optimum mix proportion and site application of the mass concrete placed in bottom slab and side wall having a large depth and section as main structures of LNG in-ground tank. This concrete requires low heat hydration, excellent balance between workability and consistency because concreting work of LNG in-ground tank is usually classified by under-pumping, adaptation of longer vertical and horizontal pumping line than ordinary pumping condition. For this purpose, low heat Portland cement and lime stone powder as cementitious materials are selected and design factors including unit cement and water content, water-binder ratio, fine aggregate ratio and adiabatic temperature rising are tested in the laboratory and batch plant. As experimental results, the optimum unit cement and water content are selected under $270kg/m^3$ and $l55{\~}l60 kg/m^3$ separately to control adiabatic temperature rising below $30^{\circ}C$ and to improve properties of the fresh and hardened concrete. Also, considering test results of the confined water ratio($\beta$p) and deformable coefficient(Ep), $30\%$ of lime stone powder by cement weight is selected as the optimum replacement ratio. After mix proportions of 5cases are tested and compared the adiabatic temperature rising($Q^{\infty}$, r), tensile and compressive strength, modulus of elasticity, teases satisfied with the required performances are chosen as the optimum mix design proportions of the side wall and bottom slab concrete. $Q^{\infty}$ and r are proved smaller than those of another project. Before application in the site, properties of the fresh concrete and actual mixing time by its ampere load are checked in the batch plant. Based on the results of this study, the optimum mix proportions of the massive concrete are applied successfully to the bottom slab and side wall in LNG in-ground tank.

• 한국건축시공학회지
• /
• 제18권3호
• /
• pp.211-218
• /
• 2018

이 연구에서는 국내산 인공 경량골재를 사용한 콘크리트의 실험결과를 바탕으로 콘크리트 표준시방서의 관련내용에 대한 합리성 및 개정의 필요성을 평가하였다. 국내 표준시방서의 내용은 ACI 211.2, ACI 213, ACI 301, JASS 5 및 CEB-FIP 시방내용들과 비교하였다. 국내산 인공 경량 잔골재의 연속적 입도분포를 위해서는 최대직경 2.5mm 이하의 천연모래 혼입이 요구되었다. 경량골재 콘크리트의 재료분리 및 과도한 블리딩을 제어하기 위해서는 현재 시방서에서 제시된 최대 물-결합재비와 단위수량에 대한 수정이 요구되었다. 특히, 배합 목표성능인 초기 슬럼프, 28일 압축강도, 공기량 및 기건 단위용적중량에 대해 경량골재 콘크리트의 합리적인 배합설계 절차의 확립이 요구되었다. 결과적으로 콘크리트 표준시방서는 국내산 인공 경량골재의 특성을 고려하여 전반적이 개정이 요구되었다.

• 대한지역사회영양학회지
• /
• 제11권6호
• /
• pp.793-807
• /
• 2006

This study was performed to estimate the effect of alphacalcidol supplementation or nutrition education on the nutrient intakes, bone mineral density and bone markers in continuous ambulatory peritoneal dialysis (CAPD) patients. The 90 CAPD subjects were randomly assigned to 3 groups (alphacalcidol group: AG, nutrition education group: NG, and control group: CG). Alphacalcidol supplementation($0.5{\mu}g/day$) was carried out for 8 months. Nutrition counseling was performed according to the patient s individual question for the first 6 months and scheduled nutrition education with individual counseling was carried out for the last 2 months. In baseline data. there were no significant differences in age, sex, family number, education years and monthly income except the NG showed significantly less duration of CAPD (p< 0.05) compared to other two groups. After intervention all three groups showed tendency of lower intakes. NG revealed less decrease in protein, especially in animal protein calcium from Ca-P binder, dietary calcium, dietary iron and niacin. NG showed significantly more increase in dry weight (p<0.05) and AG in waist circumference (p<0.001) after intervention. The groups did not show significant differences in the changes of biochemical indices related to bone metabolism. NG revealed more increase in trochanter BMD(p < 0.05) compared to other two groups. It seems that nutrition education is more effective in preventing deterioration or improving the bone and general nutrition status.

• 패션비즈니스
• /
• 제21권6호
• /
• pp.16-30
• /
• 2017

Currently, e-textile market is rapidly expanding and the emerging area of e-textiles requires electrically conductive threads for diverse applications, including wearable innovative e-textiles that can transmit/receive and display data with a variety of functions. This study introduces hybrid nano-structures which may help increase the conductivity of the textile threads for use in wearable and flexible smart apparels. For this aim, Ag was selected as a conductive material, and yarn treatment was implemented where silver nanowire (AgNW) and graphene flake (GF) hybrid structures overcome the limitations of the AgNW alone. The yarn treatment includes several treatment conditions, e.g., annealing temperature, annealing time, binder material such as polyurethane (PU), coating time, in order to search for the optimum method to form stable conductive nano-scale composite materials as thin film on the surface of textile yarns. Treatedyarns showed improved electrical resistance readings. The functionality of the spandex yarn as a stretchable conductive thread was also demonstrated. When the yarn specimens were treated with colloid of AgNW/GF, relatively good electrical conductivity value was obtained. During the extension and recovery cycles of the treated yarns, the initial resistance values did not deteriorate significantly, since the network of nanowire structure with the support of GF and polyurethane stayed flexible and stable. Through this research, it was found that when one-dimensional structure of AgNW and two-dimensional structure of GF were mixed as colloids and treated on the surface of textile yarns, flexible and stretchable electrical conductor could be formed.