• Tuberculosis and Respiratory Diseases
• /
• v.84 no.3
• /
• pp.209-216
• /
• 2021

Background: Endobronchial lung cancer (EBLC) and bronchial anthracofibrosis (BAF) share similar symptoms and radiological findings. The aim of this study was to describe clinical and radiological differences between BAF and EBLC, both of which were confirmed by bronchoscopy. Methods: This was a retrospective study of patients with BAF or EBLC from 2008 to 2014. Data were derived from a bronchoscopy registry made since January 1, 2008. Clinical and radiological characteristics of both diseases were analyzed. Results: Among 3,214 patients who underwent bronchoscopy, 167 and 117 patients were enrolled in BAF and EBLC groups, respectively. BAF occurred more predominantly in older non-smoking female patients with a higher chance of tuberculosis (38.3%) than EBLC (6.0%). Cough, sputum, and dyspnea were common symptoms reported for both groups. Bronchoscopic findings revealed that BAF lesions were more common in multiple lobar bronchi (85.0%) or bilateral bronchi (73.7%). Radiologic findings revealed that bronchial stenosis was the most commonly found lesion in both groups (49.1% and 78.6%, respectively). Rates of peribronchial calcification and bronchial wall thickening were higher in the BAF group. The number of patients with lymph node calcification was also higher in the BAF group. Conclusion: Results of this study demonstrated characteristics of clinical and radiologic findings of BAF and EBLC. Increasing the awareness of both diseases may help clinicians differentiate these two diseases from each other, thus avoiding unnecessary invasive diagnostic procedures.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.5 no.1
• /
• pp.132-146
• /
• 2013

For several decades, Asian nations such as Korea, Japan and China have been leading the shipbuilding industry since the decline in Europe and America. However, several developing countries such as India, Brazil, etc. are going to make an entrance into the shipbuilding industry. These developing countries are finding technical partners or information providers because they are in situation of little experiences and technologies. Now, the shipbuilding engineering companies of shipbuilding advanced countries are getting a chance of engineering business against those developing countries. The starting point of this business model is green field project for the construction of new shipyard. This business model is started with a design of the shipyard layout. For the conducting of the shipyard layout design, four kinds of engineering parts are required. Those are civil engineering, building engineering, utility engineering and production layout engineering. Among these parts, production layout engineering is most important because its result is the foundation of the other engineering parts and it determines the shipyard capacity during the shipyard operation lifecycle. Previous researches about the shipyard layout design are out of the range from the business requirements because most research cases are in the tower of ivory, which means that there are little consideration of real ship and shipbuilding operation. In this paper, a shipyard layout design for preliminary phase is conducted for the target of newly planned shipyard at Venezuela of South America with an integrated method that is capable of dealing with actual master data from the shipyard. The layout design method of this paper is differentiated from the previous researches in that the actual product data from the target ship and the actual shipbuilding operation data are used for the required area estimation.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.30 no.6
• /
• pp.376-384
• /
• 2016

Systems biology is an emerging field aiming at a systems level understanding of living organisms and focusing on the characteristics of the whole network of them. The emergence of systems biology is partly because of the availability of huge amounts of data on organisms and the extensive support of computational technologies as the tools for understanding complex biological systems. The scientific understanding of Korean medicine has been obstructed because of the lack of proper methods examining the complex nature and the unique property of it. However, systems biology could give a chance understanding Korean medicine objectively and scientifically. Pattern classification is a unique tool of Korean medicine to diagnose and treat patients and systems biology would give a useful tool to interpret pattern classification. Various omics technologies has been used to explain the relations between pattern classification and biological factors and then many characteristics of pattern classification in various diseases have been discovered. Therefore, pattern classification could be a bridge to understand the features and differences of western medicine and Korean medicine and it could be a basis to develop pattern-based personalized medicine.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.26 no.1
• /
• pp.7-16
• /
• 2003

At present, company has to produce a product that consumer like with a competitive price, a good quality, and a fitting time to supply. Process control and quality control are very important to supply with a product uniformly and inexpensively. Process control is given much weight in the quality control in manufacturing system. Statistical process controls(SPC) that are used in process generally have major impact on manufacturing, product design activities, and process development potentially. Control charts in statistical process control method can be interpreted the data from quality characteristics in production process and discriminated between chance variation and assignable variation in process. In addition, control chart can be used to monitor the process output and detect when changes in the inputs are required to bring the process back to an in-control state. The models that relate the influential inputs to process outputs help determine the nature and magnitude of the adjustments required. In this paper, the characteristic of product quality is monitored by control chart during the machining process and construction of quality control cycle is considered to divide into two types in this case that different assignable causes lead to shifts having different magnitudes. Then we are intended to find a process shift magnitude which has economical quality cost policy and are considered to quality cost functions to find a process shift magnitude. Those costs are categorized into the well-known categories of prevention, appraisal, and internal failure and external failure. This paper ends with numerical examples that demonstrate the usefulness of the model.

• Korean Journal of Health Education and Promotion
• /
• v.28 no.4
• /
• pp.63-77
• /
• 2011

Objectives: This study identifies the meaning of walking and its facilitating factors and barriers from the perspective of urban walkers in Seoul. Methods: The participants consisted of twelve people who either lived or worked in Gangnam district of Seoul. The study applied the data collection process featured in the photovoice, in which the participants took photographs and shared their stories through focus group interviews. Results: Walking is regarded as one of the easiest types of physical activity. While walking, participants find mental tranquility, communication opportunities, and a chance to step back from their everyday lives. Facilitating factors include: access to walking-friendly venues and attractive surrounding environments; the participant's assimilation into the surrounding area; having the feeling of ease and relaxation; and friends and family to walk together. Barriers consist of physical factors such as street design and the busy urban streets, insensitive traffic and low civic awareness, and personal situational factors. Conclusions: The benefit of walking exceeds beyond those of physical health promotion. Actions to encourage walking in urban areas should address the multiple meanings perceived by their citizens.

• Journal of Distribution Science
• /
• v.14 no.8
• /
• pp.87-92
• /
• 2016

Purpose - Purpose of this paper is to review and examine FTA of two countries, Korea and China, in terms of the investment aspects in bilateral FTA. Traditionally, there have been much mutual exchanges for international trade and investment between two countries for a long time. As the FTA has established between Korea and China in recent years, it can be expected that there will be more possibilities to take wide investment opportunities, which is mutual benefit to both countries in FTA era. Research design, data, and methodology - The methodology to be taken is to look into, first general economic situations and a brief look at FTA from each countries, and then to examine investment aspects in present and future between Korea and China. Results - The result examined in this research is that each country has been involved into mutual investment step by step, and it is also revealed that investment activities have been growing steadily as time goes by. Conclusions - The FTA between Korea and China has new chance and hope for mutual co-operation in relation to investment aspects of the FTA at the level of economic exchanges, which can fully utilize national resources of each country.

• Journal of the Korean Home Economics Association
• /
• v.31 no.4
• /
• pp.183-191
• /
• 1993

This study was investigated the personal rating reason for preference, and opinion for improvement on the Korean traditional foods. Questionnaire were answered by male and female university students at 8 universities in Seoul and the results are summarized as follows. 1) General trend of subjects showed preference for traditional food in order of nutrition, appearance, taste, economics, and cooking method. While the value of food itself such as nutrition, appearance, taste was rated high, practical side such as economics, and cooking method was not so agreed. Especially female students set as lower value on cooking method. 2) As a reason for rating it low, male and female students answered without distinction that traditional food are laborious and much time is needed for cooking. 3) For the idea of improving traditional food, all students had same opinion that standardized cooking method should be developed for convenient use at home, and secondly, special salestore of traditional food should be promoted. Particularly more male students had the opinion that traditional cooking method should be succeeded to at home than female students. Summarizing some significant findings from the analysis of data, all students prefer traditional food itself relatiovely. But generally they rate it low because traditional food is difficult to cook and there are not so many chances of eating. Therefore, it is regarded that standardized cooking method and promoted special salestore for more chance of eating will activated the interest of young generation, and hence contribute to succession of tradition.

• The Korean Journal of Emergency Medical Services
• /
• v.16 no.1
• /
• pp.103-115
• /
• 2012

Purpose: This is the descriptive research for providing the basic data necessary for the first aid education after understanding the first aid experience, first aid education, first aid knowledge, and educational needs of ski resorts workers. Methods: 323 workers of domestic 9 ski resorts were surveyed for data, which was collected using the systematic questionnaire from Oct. $6^{th}$ to $20^{th}$, 2011. The collected data has been processed using the program of SPSS Win. Version 14.0 and analyzed that according to the purpose of research in terms of real number, percentage, standard deviation, t-test and ANOVA. Results: 1. 58.8%(190) of ski resort workers experienced an emergency on duty and 33.6%(108) carried out the first aid for emergency patients on duty. 2. 65.6%(210) of workers experienced first aid education. 3. The percentage of correct answers of first aid knowledge was average 46.8% and average $9.35{\pm}2.54$ points out of total 20 points. 4. The first aid educational necessity indicated as follows: ski resort workers need first aid education (97.5%, 306); workers want to have the education if they have chance (94.6%, 296 persons); in addition, they need the repeated education of first aid (95.6%, 301). Conclusion: It is understood that as special first aid service can be delayed in ski resorts due to their geographical characteristics, the workers of ski resorts need the continuous and systematic first aid education enabling them to play the first responder in the first aid system when emergency situation occurs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5B
• /
• pp.509-516
• /
• 2009

The Stream Control Transmission Protocol(SCTP) is a reliable transport layer protocol that provides several features. Multihoming is the one of the features and allows an association(SCTP's term for a connection) between two endpoints to use multiple paths. One of the paths, called a primary path, is used for initial data transmission and in the case of retransmission an alternate path is used. SCTP's current retransmission policy attempts to improve the chance of success by sending all retransmissions to an alternate destination address. However, SCTP's current retransmission policy has been shown to actually degrade performance in many circumstances. It is because that, due to Karn's algorithm, successful retransmissions on the alternate path cannot be used to update RTT(Round-Trip Time) estimation for the alternate path. In this paper we propose a scheme to avoid such performance degradation. We utilize 2bits which is not used in the flag field of DATA and SACK chunks to disambiguate original transmissions from retransmissions and to keep RTT and RTO(Retransmission Time-Out) values more accurate.

• Journal of Computational Design and Engineering
• /
• v.1 no.3
• /
• pp.194-201
• /
• 2014

Optimization of design is an important step in obtaining tissue engineering scaffolds with appropriate shapes and inner micro-structures. Different shapes and sizes of scaffolds are modeled using UGS NX 6.0 software with variable pore sizes. The quality issue we are concerned is the scaffold porosity, which is mainly caused by the fabrication inaccuracies. Bone scaffolds are usually characterized using a scanning electron microscope, but this study presents a new automated inspection and classification technique. Due to many numbers and size variations for the pores, the manual inspection of the fabricated scaffolds tends to be error-prone and costly. Manual inspection also raises the chance of contamination. Thus, non-contact, precise inspection is preferred. In this study, the critical dimensions are automatically measured by the vision camera. The measured data are analyzed to classify the quality characteristics. The automated inspection and classification techniques developed in this study are expected to improve the quality of the fabricated scaffolds and reduce the overall cost of manufacturing.