• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.285-285
• /
• 2000

A continuous and reliable electrical energy supply is the objective of any power system operation. A transmission line is the part of the power system where faults are most likely to happen. This paper describes the use of wavelet transform for analyzing power system fault transients in order to determine the fault location. Synchronized sampling was made possible by precise time receivers based on GPS time reference, and the sampled data were analyzed using wavelet transform. This paper describes a fault location monitoring system and fault locating algorithm with GPS, DSP processor, and data acquisition board, and presents some experimental results and error analysis.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.1
• /
• pp.96-101
• /
• 2004

In order to measure the retina thickness, there are to need the 3-D retina photographing and the high speed signal processing system. In this paper, we introduced the retina photographing system and the 16-channel high speed image data acquisition system. There are able to measure the retina thickness with sensing image the returned laser signal to APD sensor after there were projected the HeNe laser on retina. We developed the laser projection system to sense a reflected image of the retina using APD sensor, the 16-channel high speed A/D converter and PCI master interface card for image transmission into computer.

• Korean Journal of Hydrosciences
• /
• v.2
• /
• pp.99-113
• /
• 1991

Integrated irrigation management system (IIMS) that is incorporated with a microcomputer-based decision support system (DSS) has been developed and applied to paddy rice irrigation systems management. The system hardwares consist of field data acquisition units, data transmission units, central data processing units, and printing and displaying units. Ridld data to be collected include incremental rainfall, streamflow and reservoir water levels, and water levels at several irrigation canal sections within an irrigation sidtricts. The softwares are to process field data, real-time forecasting, irrigation control data, and decision variables from data-base and simulation model subsystems. And the user-interface subsystems are incorporated to present the water system operators and managers the results from data and model sugsystems. User-friendly menu with animated graphic modules are adopted to help understand irrigation controls for the district. This paper issues the overal descriptions of DSS as applied to Anjuk irrigation district. The details of major model components for the irrigation controls are presented along with real-time data collection systems. The potentials of DSS have been appraised very practical and promising for better irrigation system operation and management.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.818-819
• /
• 2013

This paper propose a contents security technique for digital holographic display service. Digital holographic video system assumes the existing service frame for 2-dimensional or 3-dimensional video, which includes data acquisition, processing, transmission, reception, and reconstruction. In this paper, we perform the encryption of RGB image and depth-map for such a system. The experimental results showed that encrypting only 0.048% of the entire data was enough to hide the constants of the RGB image and depth-map.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.9
• /
• pp.25-37
• /
• 2007

The existing route re-establishment methods which intend to extend the lifetime of the network attempt to find new routes in order not to overly consume energy of certain nodes. These methods outperform other routing algorithms in the network lifetime extension aspect because they try to consume energy evenly for the entire network. However, these algorithms involve heavy signaling overheads because they find new routes based on the flooding method and route re-acquisition occurs often. Because of the overhead they often can not achieve the level of performance they intend to. In this paper, we propose a new route re-acquisition algorithm ARROW which takes into account the cost involved in the packet transmission and the route re-acquisition. Since the proposed algorithm considers future route re-acquisition costs when it first finds the route, it spends less energy to transmit given amount of data while evenly consuming the energy as much as possible. Using 2-dimensional Markov Chain model, we compare the performance of the proposed algorithm and that of other algorithms. Analysis results show that the proposed algorithm outperforms the existing route re-acquisition methods in the signaling overhead and network lifetime aspects.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.3
• /
• pp.235-241
• /
• 2009

Composite wood materials are very sensitive to water and inspection without any coupling medium of a liquid is really needed to wood materials due to the permeation of coupling medium such as water. However, air-coupled ultrasound has obvious advantages over water-coupled experimentation compared with conventional C-scanner. In this work, it is desirable to perform contact-less nondestructive evaluation to assess wood material homogeneity. A wood material was nondestructively characterized with non-contact and contact modes to measure ultrasonic velocity using automated data acquisition software. We have utilized a proposed peak-delay measurement method. Also through transmission mode was performed because of the main limitation for air-coupled transducers, which is the acoustic impedance mismatch between most materials and air. The variation of ultrasonic velocity was found to be somewhat difference due to air-coupled limitations over conventional scan images. However, conventional C-scan images are well agreed with increasing the resin-infiltrated time as expected. Finally, we have developed a measurement system of an ultrasonic velocity based on data acquisition software for obtaining ultrasonic quantitative data for correlation with C-scan images.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.7A
• /
• pp.1028-1035
• /
• 1999

To increase the throughput of data transmission in burst-mode TDMA communication systems and also to get a good BER performance at the same time, it is essential to rapidly acquire the carrier while keeping the desirable tracking performance. To achieve this goal, in this paper, a new decision-directed carrier recovery algorithm is presented. The proposed scheme does not incorporate the PLL and suppress the Gaussian random process of input noise by the pre-stage low pass filter so as to get both the fast acquisition and a good performance. Through computer simulations, the performance of the scheme is analyzed with respect to the acquisition time and bit error rate. The cycle slip in the proposed scheme is seldom observed at very low SNR environment in contrast to the previous proposed one. Because of this merit, it is not required to do the differential encoding and decoding in the proposed scheme.

• KEPCO Journal on Electric Power and Energy
• /
• v.3 no.1
• /
• pp.9-16
• /
• 2017

The performance test is conducted for the purpose of determining the accurate thermal performance of the power generation facility or deriving the factors of thermal efficiency degradation. Compared to the acquisition method of power plant thermal performance test data by compensating cable or transmission cable, performance test using wireless instrument can acquire digital data in order to shorten the period due to installation and demolition of instrument and enhance safety of workers and relatively accurate data can be acquired thereby improving work efficiency. Wireless instruments have already been introduced to the market a long time ago, and some of them are used in industry such as petrochemical industry. However, there is no example which has been conducted for performance test of power generation facilities. In order to apply power generation facilities, a reliable system capable of acquiring performance data smoothly without affecting the control system is required. The wireless measurement system can eliminate the measurement defects and errors such as the damage due to the movement of the connecting cable, the extension due to the extension of the shield wire, the contact failure at the contact point between the measuring sensor and the connecting wire, This method has the advantage of collecting relatively accurate performance test data.

• Journal of electromagnetic engineering and science
• /
• v.14 no.4
• /
• pp.329-331
• /
• 2014

A simple realization of an alignment-free wireless power transmission (WPT) system is presented in this letter. The WPT system consists of a transmitter with three reconfigurable modes corresponding to various controllable magnetic field directions in the azimuthal plane and an algorithm for the optimum mode selection carried by sensing the reflected voltage of the system. Twelve light emitting diodes (LEDs) are used to confirm the on- and off-state of LEDs powered wirelessly by the transmitter at every $15^{\circ}$ of the azimuthal plane. A criterion voltage from the reflected power of the system is found by using the correlation between the reflected voltage and the on- and off-state of the LEDs. Simply by continuous; monitoring of the voltage from the system, the system maintains power to the LEDs. The system is realized by MATLAB/Simulink and a National Instrument data acquisition device (DAQ) board. Measurements using the system show on-state LEDs in the azimuthal plane except at the angles of $60^{\circ}$, $75^{\circ}$, $180^{\circ}$, and $300^{\circ}$.

• Journal of the Korean Society of Mineral and Energy Resources Engineers
• /
• v.55 no.6
• /
• pp.635-648
• /
• 2018

This study analyzed patent trends of seismic nodal systems and the technical characteristics of core patents of three major companies, including Fairfield, Sercel, and Wireless Seismic, to examine the focus of technology development of each company. From the analysis, the patent application growth rate of seismic nodal systems has steadily increased since early to mid-2000s and has recently shown a higher growth rate. Over the same period, the patent application growth rate of the three major companies examined was higher than that of the global trend, and patent infringement cases was also examined to evaluate market competition in this field. Analysis of the technical characteristics of the three companies' 33 core patents showed that they are generally focused on seismic signal detection. Sub-technologies included improved reliability of data acquisition, data transmission efficiency, and overall operating of the seismic nodal system. New entrants in field of technology development or manufacturing of seismic nodal systems where the market is growing must closely analyze the contents of major companies' products and patents to prevent possible patent disputes or duplicate research.