• 한국정밀공학회지
• /
• 제26권10호
• /
• pp.129-133
• /
• 2009

Considerable attention has been focused on digital X-ray systems with transmission. However, only a few attempts have been made using X-ray backscatter systems. This study developed a Data Acquisition System (DAS) for backscattered X-rays. The imaging system used X-ray backscatter at low energy levels, which has unique advantages in terms of acquiring information that cannot be obtained using the transmission system. Such systems are of potential benefit in the medical, industrial, security and military fields because of its practical benefits and the low doses used. The developed system is a similar body scan system. Experiments were carried out using a several metal materials and a fish, which produces results similar to those obtained using the human body during X-ray testing.

• 한국전자파학회지:전자파기술
• /
• 제27권3호
• /
• pp.17-27
• /
• 2016

In the high-frequency characterizations of planar circuit components, measurement data may not be physical. It is mainly due to resonance effects concerned with discontinuities which are inevitable for a planar component characterization. In this paper, a novel accurate transmission line characterization method is presented that excludes the resonance effects based on measurement data reconfirmation. For the physically obvious data acquisition near the resonance frequencies of a transmission line, the additional lines with different line lengths are fabricated on the same substrate. The test transmission lines are characterized by using vector network analyzer (VNA) in 100 MHz to 26.5 GHz. It is shown that an accurate transmission line characterization can be achieved with the proposed measurement data reconfirmation technique.

• 상하수도학회지
• /
• 제31권3호
• /
• pp.249-256
• /
• 2017

Recently, application areas based on M2M (Machine-to-Machine communications) and IoT (Internet of Things) technologies are expanding rapidly. Accordingly, water flow and water quality management improvements are being pursued by applying this technology to water and sewage facilities. Especially, water management will collect and store accurate data based on various ICT technologies, and then will expand its service range to remote meter-reading service using smart metering system. For this, the error in flow rate data transmitting should be minimized to obtain credibility on related additional service system such as real time water flow rate analysis and billing. In this study, we have identified the structural problems in transmitting process and protocol to minimize errors in flow rate data transmission and its handling process which is essential to water supply pipeline management. The result confirmed that data acquisition via communication system is better than via analogue current values and pulse, and for communication method case, applying the industrial standard protocol is better for minimizing errors during data acquisition versus applying user assigned method.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2022년도 추계학술대회
• /
• pp.594-596
• /
• 2022

본 논문은 무인비행장치에 탑재된 카메라를 통해 획득한 고화질의 이미지를 무인비행장치 상에서 전처리를 하여 이동통신망을 통해 서버로 전송하기 위한 시스템 및 기법에 관한 것이다. 기존의 이미지 획득 서비스용 무인비행장치의 경우, 무인비행장치에 탑재된 카메라의 외부저장장치에 획득한 이미지를 저장하고, 비행이 완료된 이후에 저장장치를 직접 옮기는 방식으로 이미지를 확인하였다. 이러한 방식의 경우, 외부저장장치를 통해 직접적으로 이미지 데이터를 확인하기 전에는 이미지 획득이나 전처리가 제대로 수행되었는지 확인할 수 없다는 한계점이 존재한다. 또한 해당 데이터는 외부저장장치에만 저장되기 때문에 데이터의 공유가 번거롭다는 단점이 존재한다. 본 논문에서는 위와 같은 문제점을 해결하기 위하여, 원격에서 이미지를 실시간으로 확인 가능한 시스템을 제안한다. 더 나아가, 무인비행장치에서의 촬영을 통한 이미지 획득 외에 지오태깅과 같은 전처리와 이동통신망을 통한 전송까지 수행이 가능한 시스템 및 방법을 제안한다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제8권1호
• /
• pp.64-68
• /
• 2016

These fields are integrated to visualize and finalize the proposed development, in simulation environment. SCADA (supervisory control and data acquisition) systems and distributed control systems (DCSs) are widely deployed in all over the world, which are designed to control the industrial infrastructures, in real ways. To supervise and control the various parts of designed systems; trends to require a deep knowledge to understand the overall functional needs of industries, which could be a big challenge. Industrial field devices (or network sensors) are usually distributed in many locations and are controlled from centralized site (or main control center); the communication provides various signs of security issues. To handle these issues, the research contribution will twofold: a method using cryptography is deployed in critical systems for security purposes and overall transmission is controlled from main controller site. At controller site, multimedia components are employed to control the overall transmission graphically, such as system communication, bytes flows, security embedded parameters and others, by the means of multimedia technology.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.469-470
• /
• 2010

• 대한의용생체공학회:의공학회지
• /
• 제13권1호
• /
• pp.69-78
• /
• 1992

This Paper describes implementation of a remote ECG diagnostic system using telephone line. The overall system includes ECG data acquisition system, ECG terminal, system control software, automatic diagnosis system, and transmission system.'The proposed system provides various functions, which are ECG data acquisition, transmission, receiving, diagnosis and dialogue between patients and medical doctors. Thls system is very simple and convienient to use. We evaluate the performance of modem and the accuracy of automatic diagnosis algorithm. The obtained results suggest the Possibilities of a remote ECG diagnostic system using the only existed telephone line.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 추계종합학술대회
• /
• pp.90-94
• /
• 2003

VMS(Vessel Monitering System)를 구축하려면 항해중인 선박들의 실시간 선위데이터를 수집할 수 있는 선박용 MDT(Mobile Data Terminal 이동데이터단말기)가 필요하다. 먼저 선박의 운항데이터를 수집하기 위해서 GPS의 정보를 취득하고, 다음으로는 데이터의 전송을 위한 선박용 SSB 모뎀이 개발되어야 한다. 그리고 자동으로 선박의 ID, GPS의 시각 및 위치정보를 지속적으로 무선국에 전송하고 취득할 수 있는 통신프로토콜도 연구되어야 한다. 본 연구에서는 음성과 문자정보를 동시에 전송할 수 있는 SSB 송수신기용 모뎀과 송수신제어부, 데이터전송 및 취득알고리즘에 의한 해상용 GPS MDT를 마이크로프로세서를 사용하여 저가형으로 연구하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.952-955
• /
• 2000

Nowadays, Internet is so popular that we can easily access the remote site to search information and to communicate remote site and users. People who want to make a collaborate working environment can use JAVA, CORBA, and other internet programming tools like a Perl/XML. The mechanist are try to make the environment fur collaboration within design/manufacturing, simulation, remote sensing through TCP/IP And many industries and research institutions are working towards the agile manufacturing. This paper describes an internet-based real-Time remote monitoring system. The system consists of a hardware setup and a software interface. The hardware setup consists of a machine and its data acquisition hardware, while the software interface incorporates the data acquisition software, the server program, and the client program. The server program acts as the main interface between the data acquisition system and the internet technology. The client program is to be distributed to the remote users who want to monitor the machining status. The system has been demonstrated and verified for an industrial High-Speed Machine (HSM) especially measuring cutting force and acoustic emission. To share the signal, we make the WWW server and display its value. The system has been found to be highly efficient, reliable and accurate.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(3)
• /
• pp.153-156
• /
• 2000

In this paper, we developed an outdoor augmented reality system which has remote real scenes acquisition ability. The real scenes acquisition system consists of Image acquisition system, tracking system, wireless data transceiver and power supply. The tracking system consists of Tans Vector and RT-20 which measures a position and attitude of the CCD camera that attached to the remote control helicopter. Wireless data transceiver system is utilized for data transmission of remote system that of attitude, position information, and real scenes data that acquired by the CCD camera. Maximum propelling power of remote control helicopter is 15Kg, so we used 7.2V li-ion cell as a power supply for system minimize. As the results of experiment, the developing system presented application possibility of remote information acquisition system such as construction simulation & estimation, broadcasting, tour guide.