• Journal of the Korean Graphic Arts Communication Society
• /
• v.18 no.2
• /
• pp.103-111
• /
• 2000

We synthesized hexapyrrolylbenzene(HPB) an octapyrrolylenaphthalene(OPN) and measured photocurrent and darkcurrent of them. At the result, photocurrent of HBP/TiOPc and OPN/TiOPc systems were 1.81E-11 and 1.04E-10 at electric field 4.4$\times$10$^3$V/cm, and efficiency of them were 16 and 167 respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.349-352
• /
• 2004

The $CdS_{1-x}Se_x$ thin films were grown on the GaAs(100) wafers by a Hot Wall Epitaxy method(HWE). The temperatures the source and the substrate temperature are $580^{\circ}C\;and\;440^{\circ}C$ respectively. The crystalline structure of thin films was investigated by double crystal X-tay diffraction(DCXD). Hall effect on the sample was measured by the van der Pauw method and studied on the carrier density and mobility dependence on temperature. In order to explore the applicability as a photoconductive cell, we measured the sensitivity($\gamma$), the ratio of photocurrent to darkcurrent(pc/dc), maximum allowable power dissipation(MAPD), spectral response and response time.

• Journal of the Korean Society of Radiology
• /
• v.4 no.1
• /
• pp.5-9
• /
• 2010

In recent, a digital x-ray detector attracted worldwide attention and there are many studies to commercialize. There are two methods in digital x-ray detector. This method is an Indirect method and Direct method. This study is to see the differences between the digital x-ray detector based on a-Se used in the existing indirect conversion method and an x-ray conversion material that has better SNR(Signal-to-noise ratio) and property than the a-Se. To solve the problem that is difficult to make a large area film using Screen-Print method, we used a Screen-Print method. In this study, we used a polyclystal $HgI_2$ as x-ray conversion material and a sample thickness is $150{\mu}m$ and an area is $3cm{\times}3cm$. ITO(Indium-Tin-Oxide) electrode was used as top electrode using a Magnetron Sputtering System and each area is $3cm{\times}3cm$, $2cm{\times}2cm$ and $1cm{\times}1cm$ and then we evaluated darkcurrent, sensitivity and SNR of the $HgI_2$ film are measured, then we evaluated the electrical properties. And we used a current integration mode when I-V test. This experiment shows that the sensitivity increases in accordance with the area of the electrode but the SNR is decreased because of the high darkcurrent. Through fabricating of various thicknesses and optimal electrodes, we will optimize SNR in the future work.

• Journal of the Korean Society of Radiology
• /
• v.4 no.2
• /
• pp.27-30
• /
• 2010

A X-ray optical modulator measures x-ray dose using optical transmissivity ratio change of the liquid crystal cell. To apply in this optical modulator, we made photoconductor films and compared electrical properties of this films in this study. Photoconductors are deposited on ITO glass with $200{\mu}m$ using the percipitation method and print method. I-V test was conducted to alalyze electrical properties of this films and measured darkcurrent and SNR was acquired using the measured dark current and sensitivity. As a result of this measurements, $HgI_2$ film made by precipitation method is lower(about 40%) darkcurrent than $HgI_2$ films made by precipitation method and sensitivity is two times greater than print method. And we knew that $HgI_2$ films were also 10~25 times greater SNR at $1v/{\mu}m$ than $PbI_2$, PbO, CdTe film made by precipitation method. This results suggest that $HgI_2$ films made by precipitation method has improved characteristics of x-ray dose meter by applying in x-ray optical modulator.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.484-484
• /
• 2013

기존 진단용 Digital X-ray Detector이 직접방식에서는 a-Se (Amorphous Selenium)이 대중화되었지만 고전압을 인가하여야한다는 점과 그로 인한 물질 자체의 Life time 감소 등 여러 단점들 때문에 기타 후보물질들로 HgI2, PbI2, PbO, CdTe, CdZnTe가 연구 되고 있다. 이러한 후보 물질들 중 본 연구에서는 PVD (Physical Vapor Deposition)방식을 이용하여 Polycrystalline CdTe 박막을 제작하고 특성 향상을 위해 유전물질을 Passive layer와 Protect layer로써 증착하였다. 또한 유전체층의 위치에 따른 특성 분석을 위해 제작된 박막은 FE-SEM (Field Emission Scanning Electron Microscope), XRD (X-ray Diffraction)을 통해 구조적인 특성을 확인하였다. 그리고 입사되는 X-ray 선량에 의해 생성되는 전기적 특성을 분석하였다, 그 결과 박막의 Grain Size는 약 $5{\mu}M$이며 (111)방향의 주 peak를 띄는 Poly CdTe형태로 증착된 것을 확인하였다. 전기적인 신호 결과 Passive layer와 Protect layer를 증착한 박막 모두 Darkcurrent가 감소된 것을 확인하였다. 또한 Sensitivity 측정 결과 Passive layer를 삽입한 경우 신호 값이 감소하였으며 Protect layer를 삽입한 경우 신호 값의 변화가 일어나지 않았다. 그러므로 Protect layer를 등착한 박막의 경우 SNR이 현저히 높아지는 결과를 낳았다.

• Korean Journal of Crystallography
• /
• v.9 no.2
• /
• pp.96-106
• /
• 1998

수평 전기로에서 AgInS2 다결정을 합성하여 HWE 방법으로 AgInS2 단결정 박막을 반절연성 GaAs(100) 위에 성장하였다. AgInS2 단결정 박막은 증발원과 기판의 온도를 각각 680℃, 410℃로 성장하였다. 이때 단결정 박막의 결정성이 10 K에서 측정한 광발광 스펙트럼은 597.8 nm(2.0741 eV) 근처에서 엑시톤 방출 스펙트럼이 가장 강하게 나타났으며, 또한 이중결정 X-선 요동곡선(DCRC)의 반폭치(FWHM)도 121 arcsec로 가장 작게 측정되어 최적 성장 조건임을 알 수 있었다. Hall 효과는 van der Pauw 방법에 의해 측정되었으며, 온도에 의존하는 운반자 농도와 이동도는 293 K에서 각각 9.35×1023개/㎥, 2.94×10-2㎡/V·s였다. AgInS2 단결정 박막의 광전류 단파장대 봉우리들로부터 10 K에서 측정된 ΔCr(crystal field splitting)은 0.15eV, ΔSo(spin orbit coupling)는 0.0089 eV였다. 광전도 셀로서 응용성을 알아보기 위해 감도(γ), pc/dc(photocurrent/darkcurrent), 최대허용소비전력(maximum allowable power dissipation: MAPD), 응답시간(response time)등을 측정한 결과, S 증기 분위기에 열처리한 광전도 셀의 경우 γ=0.98, pc/dc=1.02×106, MAPD=312 mW, 오름시간(rise time)=10.4 ms, 내림시간(decay time)=10.8 ms로 가장 좋은 특성을 얻었다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.4
• /
• pp.73-80
• /
• 1989

The image sensitive PbO photoconductive films were fabricated ar several deposition conditions such as $O_2$ gas pressure, deposition rate, and substrate temperature. And the effects of these deposition condition on the structural and electrical properties of them were investigated with the aid of scanning electron photomicrographs. X-ray diffraction patterns, and current-valtage chatacteristics. The results show that when PbO film has red tetragonal structure and its dominant orientations are <110> and <010> direction, photocurrent-darkcurrent ratio and light transfer ratio are increase.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.344-348
• /
• 2004

The CdSe thin films wee grown on the Si(100) wafers by a hot wall epitaxy method(HWE). The source and substrate temperature are $600^{\circ}C\;and\;430^{\circ}C$ respectively. The crystalline structure of epilayers was investigated by double crystal X-ray diffraction(DCXD). Hall effect on the sample was measured by van der Pauw method and studied on the carrier density and mobility dependence on temperature. From Hall data, the mobility was increased in the timperature range 30K to 150K by impurity scatering and decreased in the temperature range 150K to 293K by the lattice scattering. In order to explore the applicability as a photoconductive cell, we measured the sensitivity($\gamma$), the ratio of photocurrent to darkcurrent(pc/dc), maximum allowable power dissipation(MAPD), spectral response and response time. The results indicated that the photoconductive characteristic were the best for the samples annealed in Cu vapor compare with in Cd, Se, air and vacuum vapour. Then we obtained the sensitivity of 0.99, the value of pc/dc of $1.39{\times}10^7$, the MAPD of 335mV, and the rise and decay time of 10ms and 9.5ms, respectively

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.304-308
• /
• 2004

The $Cd_{1-x}Zn_xS$ thin films were grown on the Si(100) wafers by a hot wall epitaxy method(HWE). The source and substrate temperature are $600^{\circ}C\;and\;440^{\circ}C$ respectively. The crystalline structure of epilayers was investigated by double crystal X-ray diffraction(DCXD). Hall effect on the sample was measured by the van der Pauw method and studied on the carrier density and mobility dependence on temperature. In order to explore the applicability as a photoconductive cell, we measured the sensitivity($\gamma$), the ratio of photocurrent to darkcurrent(pc/dc), maximum allowable power dissipation(MAPD), spectral response and response time. The results indicated that the photoconductive characteristic were the best for the $Cd_{0.53}Zn_{0.47}S$ samples annealed in Cu vapor compare with in Cd, Se, air and vacuum vapour. Then we obtained the sensitivity of 0.99, the value of pc/dc of $1.65{\times}10^7$, the MAPD of 338mW, and the rise and decay time of 9.7ms and 9.3ms, respectively

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.134-135
• /
• 2006

$AgInS_2$ single crystal thin filmsl was deposited on throughly etched semi-insulator GaAs(100) substrate by the Hot Wall Epitaxy (HWE) system. The source and substrate temperature were $680^{\circ}C$ and $410^{\circ}C$ respectively, and the thickness of the single crystal thin films is $6{\mu}m$. From the photocurrent spectrum by illumination of perpendicular light on the c-axis of the $AgInS_2$ single crystal thin film, we have found that the values of spin orbit coupling ${\Delta}So$ and the crystal field splitting ${\Delta}Cr$ were 0.0098 eV and 0.15 eV at 10 K, respectively. In order to explore the applicability as a photoconductive cell, we measured the sensitivity ($\gamma$), the ratio of photocurrent to darkcurrent (pc/dc), maximum allowable power dissipation (MAPD), spectral response and response time. The result indicated that the samples annealed in S vapour the photoconductive characteristics are best. Therefore we obtained the sensitivity of 0.98, the value of pc/dc of $1.02{\times}10^6$, the MAPD of 312 mW, and the rise and decay time of 10.4ms and 10.8ms respectively.