• 펄프종이기술
• /
• 제48권1호
• /
• pp.134-141
• /
• 2016

Dampening in printing is not only used with plain water but also used with various substances like dampening additive, in order to improve the wetting property by lowering the surface tension and to control material for modifing the ink transfer characteristic with proper emulsification. We have studied the printing quality according to these, looking into interrelationship among the dampening solution's pH, electrical conductivity and IPA content, prescribing the proper usage and minimum usage of fountain solution and dampening additive. In this study, it shows good result when mixing at the 7 wt% dampening with additive solution, which is result from the color density of printed sheets in accordance with the change of dampening solution condition. And the printed density value calculated 1 hour after printing, it shows relatively safe value at the etch liquid 4 wt% and IPA addition 2 wt%. The dry down at this test showed similar results regardless of various dampening conditions on coated paper, but in case of uncoated paper, the dry down showed a quite gap of different due to the fast penetration to the paper.

• 한국인쇄학회지
• /
• 제25권1호
• /
• pp.43-52
• /
• 2007

Offset printing is one of the well known printing technique of lithographic process and consists of image area and 'non-image area on a flat image carrier. The surface tension of dampening water can be controlled by adding IPA after mixing of raw water and etching solution. The etching solution contains a surfactant for reducing surface energy, a clean agent for non-imaging area, wetting agent for protecting non-imaging area from oil components like ink and also an emulsifying agent for controlling emulsification. In this study, the present situation of dampening water maintenance has examined by collecting dampening water using at domestic companies. The pH related to dampening water, conductivity, contact angle, emulsification curve are measured to define the current situation of dampening water control of each companies and to analyze the relationship among measured properties. In the study most of companies among 16 printing companies tested controlling dampening water through pH value. However, the quality of printing has varied depending upon conductivity, contact angle, IPA content, and emulsification value. The control of dampening water should be carry at the state of the standard when adding proper ratio of etching solution. It would be more effective when pH or conductivity control carries out in parallel with controlling dampening water. Therefore the concept that pH5.5 is correct is based concept. Based on these initial tests it is defined that the standardization of dampening water control is required.

• 한국인쇄학회지
• /
• 제20권1호
• /
• pp.123-132
• /
• 2002

The literature often mentions the hardness of water in dampening solutions as possible source of problem. In most literature describes that the water hardness affects print quality. However water hardness affects not only print quality, but also emulsification of ink and dampening solution. Therefore the purpose of this study was to determine if water hardness actually affects the emulsification rate of dampening solution and ink. And this study for the factors determining the emulsion velocity, we have measured water pick-up and calculated emulsion velocity constant 'k' and activation energy.

• Plant Resources
• /
• 제8권3호
• /
• pp.263-274
• /
• 2005

We have studied the effects of dampening papers (Dampened paper, Newspaper, Korean paper, Flower sheet), silica gel (30g, 60g) and temperature ($20^{\circ}C,\;25^{\circ}C$) on color changes of Erythronium japonicum. In the treatment of $20^{\circ}C$, color changes were low in treatments with silica gel rather than in a treatment of dampening papers. In particular, newspaper and Korean paper showed much less changes in colors by the combination treatments with 30g of silica gel. Likewise, in the treatment of $25^{\circ}C$, color changes were low in combination treatments with silica gel rather than in a alone treatment of dampening papers. For the combination treatment with 30g of silica gel, low color changes were shown in the divisions of newspaper and Korean paper, while for the combination treatment with 60g of silica gel, low color changes were shown in the those of Korean paper and dampened paper.

• 한국인쇄학회지
• /
• 제3권1호
• /
• pp.17-24
• /
• 1985

The main purmose of this study is to establish the corelatione between the ink receptivity and the surface 초\ulcorner岺\ulcornerparamenters in the presence of the dampening solution in the Lithographic Printing. The surface chemical parametere are calculated from the components (dispersion part and polar part) of which the surface tension of various surfaces acd ink are estimated from the contact angle The conclusions are; 1) the receptivity of ink depends on the value of polar part of surface tension, ; and ink, ;and decreases as the value of and increase, 2) the adherence of ink depends on the value of ink and dampening solution, and decreases as the value of dampening solution, decreases on the image area.

• 한국인쇄학회:학술대회논문집
• /
• 한국인쇄학회 2001년도 국제학술발표회
• /
• pp.135-140
• /
• 2001

Laboratory test method which determines the emulsification rate of dampening solution and ink has been described In lithography using the mutual repellence of oil and water, the emulsification is produced by dispersion of dampening water and ink because of the printing pressure on a practical press. Rheological properties of Ink-Water balance are the important factors in lithographic printing. The emulsification theory and laboratory test method deduced from Surland and Kim. It is shown that the emulfisication curves relate to the rates of change in the emulsifide ink\`s flow properties, to the shear stability of the emulsion formed To study on the factors determining the emulsion velocity, we have measured water pickup and calculated emulsification velocity constant \`k\` and activation energy.

• 한국인쇄학회지
• /
• 제19권1호
• /
• pp.28-41
• /
• 2001

Rheological properties of ink and Ink-Water balance are the important factors in lithographic printing. Laboratory test method which determines the emulsification rate of dampening solution and ink has been described. The emulsification theory and laboratory test method deduced from Surland and it has become a useful tool for the industry. The effects of pH value and surface tension of dampening solution on the emulsification rate has been tested by many researcher. In this paper we focused on the factors which influence in the emulsification such as pH and surface tension of dampening solution and emulsifying temperature. To study on the factors determining the emulsion velocity, we have measured water pickup and calculated emulsion velocity constant 'k' and activation energy.

• 한국인쇄학회지
• /
• 제20권2호
• /
• pp.7-18
• /
• 2002

The emulsification of lithographic printing inks are very important to determine printing quality. In this study, we measured the variation of water pickup according to the hardness of water in dampening solution. In order to observe the rheorogical properties of the emulsified inks, we measured the viscosity, the elastic return, the thixotropy area and yield stress value of the emulsified inks. In this paper, we found that the water pickup of the ink increase the hardness of water with the amount of dampening solution. Also, The viscosity, the yield stress value and the thixotropy area were increase by the water pickup of the ink.

• 펄프종이기술
• /
• 제39권2호
• /
• pp.31-37
• /
• 2007

Lithography like off-set printing is processed using the repellent properties between water and oil, so all inks for off-printing must work with dampening solution(water). The dampening water may cause the emulsification of ink by the printing pressure in the printing nip. This study aimed to investigate the effect of emulsified inks on print mottle. The cyan ink was emulsified artificially with the different IPA(isopropyl alcohol) content in this study. We evaluated the print mottle by densitometer and image analysis method. The print mottle phenomenon was directly affected by IPA content. The emulsification of inks also had an influence on flow properties of inks and it increased ink transfer rate. It, however, caused low ink density. Moreover the emulsified inks were spreaded to around dots and cause the thinning density on the non-printing area like print mottle. The trial printing showed that the emulsified inks also cause scumming on the printing result with little mistake of adjusting dampening solution and mostly decreasing dot reproduction. We could, therefore, find out the obvious effect of emulsified inks on print mottle.

• 한국인쇄학회지
• /
• 제28권2호
• /
• pp.31-44
• /
• 2010

Ever since the introduction of offset lithography, an operator have looked for ways to improve the process by reducing need for dampening solution. Lithography like off-set printing is processed using the repellent properties between water and oil, so all inks for lithography printing must work with dampening solution. The dampening solution may cause the emulsification of ink by the printing pressure in the printing nip. Emulsified ink changed viscosity, tack and causes problems such as bad transfer, uniform density and printed mottle. For a high quality web printing, we studied the effect of emulsified heat-set web inks on the printability, such as amount of ink transfer, printed density and uniformity. For this study, we were carried out by using IGT printability tester C1. For determination of ink properties using the spread meter and Thwing Albert Ink-o-meter, and using the densitometer and image analysis for printed quality determination. The experimental results of this study, we look forward to can be used as the basis for improve of the web print quality.