• Title/Summary/Keyword: damaged starch

Search Result 70, Processing Time 0.029 seconds

Starch and Pasting Characteristics of Various Rice Flour Collected from Markets (시중 유통되는 쌀가루의 전분 및 호화 특성)

  • Lee, Na-Young
    • Food Science and Preservation
    • /
    • v.19 no.2
    • /
    • pp.257-262
    • /
    • 2012
  • pasting characteristics. Their water contents, water holding capacities, solubilities, swelling power, amylose contents, damaged starches, particle sizes and pasting characteristics were measured. The water content and water holding capacities of various types of rice flours collected in the market were 7.64-14.97% and 95.22-232.94%, respectively. Their solubilities and swelling power were 1.97-37.40% and 1.33-5.76, respectively. Various types of rice flour had 32.11-305.67 ${\mu}m$ particle sizes. Among the various types of rice flour collected in the market, the lowest starch damaged content was 3.17%. The peak viscosities of the samples were 17.74-295.95 RVA. Among the rice flours that were collected in the market, the lowest pasting temperature was $69.72^{\circ}C$. As a result, it was shown that rice flour types with high starch damage contents tend to have higher expressed water holding capacities. Moreover, the samples with lower particle sizes tended to have final viscosities, and pasting temperatures.

Physicochemical characteristics of rice variety for dry-milled flour

  • Yoon, Mi-Ra;Kwak, Jieun;Lee, Jeom-Sig;Won, Yong-Jae;Kim, Mi-Jung;Choi, Induck;Jeon, Yong-Hee;Kim, Sun Lim
    • Proceedings of the Korean Society of Crop Science Conference
    • /
    • 2017.06a
    • /
    • pp.294-294
    • /
    • 2017
  • Rice (Oryza sativa L.) is one of the main agricultural crops in Asian countries, including Korea, and is considered as the most important staple food in the world. Rice is also processed into flour, which is consumed through various foods such as cake, noodle, bread, and confectionary. Rice flour quality is highly dependent on variety and milling conditions. Producing rice flour with fine particles is more difficult than wheat flour because of its grain hardness. The Korean rice varieties representing different amylose contents were selected for this study. The relationship between the morphological and starch characteristics of rice kernels and the appropriate varieties for producing good-quality, dry-milled rice flour were examined. The hardness of the rice kernels was determined by measuring the pressure at the grain breakage point. The damaged starch content of the rice flour was determined using a Megazyme starch damage assay kit. The particle-size distribution of the rice flour was measured as the volume-base distribution using a laser-diffraction particle size analyzer. The mean particle-size distribution of the dry-milled flour obtained was between $65.3{\sim}105.1{\mu}m$ among the rice varieties. The opaque, non-glutinous, Seolgaeng rice demonstrated a narrow peak at the fine size, whereas the entire particle-distribution range for other varieties was wide. Seolgaeng exhibited significantly lower damaged starch content of dry-milled flour than the other varieties (p < 0.05). Seolgaeng showed lowest in energy consumption on rice flour production with 200 mesh particle size. Accordingly, it is possible to produce dry-milled rice flour which is similar to wheat flour that would considerably reduce milling costs.

  • PDF

Physicochemical Property Changes of Sweet Potato Starch by Ultra Fine Pulverization

  • Kim, Hee-Sun;Park, Hye-Young;Han, Gwi-Jung;Kim, Myung-Hwan
    • Food Engineering Progress
    • /
    • v.15 no.2
    • /
    • pp.169-174
    • /
    • 2011
  • This study was performed to analyze the effects of ultra fine pulverization (UFP) on the physicochemical properties of sweet potato starch (SPS). The average diameter and specific surface area of the SPS was decreased from 22.94 to 10.25 $\mu$m and from 0.879 to 1.909 $m^2$ /g throughout UFP, respectively, and the damaged starch content was increased from 13.7 to 99.2%. The pulverized sweet potato starch (PSPS) had higher swelling power, solubility, and transmittance values than the SPS. X-ray diffractograms revealed that the SPS had a C-type pattern, which disappeared in PSPS. The rapid visco analysis (RVA) characteristics, peak viscosity, break down, and set back of SPS ceased to exist in PSPS. According to differential scanning calorimetry (DSC) curves, the peak temperature ($T_p$) and gelatinization enthalpy ($\Delta$E) of SPS were $71.95^{\circ}C$ and 10.40 J/g, respectively, while these remained undetected in PSPS. The enzymatic digestibilities of SPS and PSPS were 61.7 and 84.7%, respectively.

Investigation of Physical Property Change in Modified Corn Starch by Ultra Fine Pulverization (초미세분쇄를 이용한 옥수수 변성전분의 물리적 특성 변화 구명)

  • Han, Myung Ryun;Kim, Ae Jung;Chang, Moon Jeong;Lee, Soo Jeong;Kim, Hee Sun;Kim, Myung Hwan
    • Food Engineering Progress
    • /
    • v.13 no.4
    • /
    • pp.335-340
    • /
    • 2009
  • This study was performed to analyze changes in the molecular structural and physical properties of modified corn starch, in which particle structure was broken using high impact planetary mill and ultra fine pulverizing techniques. The average diameter and specific surface area of the modditied corn starch after pulverization decreased 50% and increased 567%, respectively. Content of low molecular substances mersured using gel permeation chromatography (GPC) increased from 21.0% to 86.5% after pulverizing corn starch. Damaged starch content also increased from 9.63% to 83.57% after pulverizing corn starch. After pulverization, gel formation capacity corn starch was reduced compared to that of control by structure breakdown.

Physicochemical Characteristics of Super-Yield Korean Rice Cultivar depending on Milling Condition (초다수성 국내쌀 품종의 분쇄방법에 따른 이화학적 특성)

  • Lee, Na-Young;Ha, Ki-Young
    • The Korean Journal of Food And Nutrition
    • /
    • v.28 no.6
    • /
    • pp.1065-1070
    • /
    • 2015
  • A high-yield Korean rice cultivar cv. Boramchan and Hanmaeum, and rice cultivar for use in staple cv. Hopum were prepared and investigated for their physiological characteristics. Water content, water holding capacity, amylose content, damaged starch content, particle size, and pasting properties of the rice flours were measured. Moisture content of the Boramchan and Hanmaeum, made under wet and dry milling conditions, were as follows: wet conditions (14.79% and 13.56% respectively) and dry conditions (7.98% and 7.14% respectively). Water holding capacity of the Boramchan and Hanmaeum made by wet milling condition was 236.67% and 231.35%, respectively. Water holding capacity of the samples made by dry milling condition showed a higher score compared with other samples. The amylose content of Hopum, Boramchan, and Hanmaeum made by dry milling condition were 19.12%, 19.55% and 19.59%, respectively. Damaged starch contents of the samples made by wet milling showed a lower score. Final viscosity of Hopum, Boramchan, and Hanmaeum made by wet milling condition was 2,604, 3,052, and 2,917 cp, respectively. In this study, the results indicated that the super-yield Korean rice flour made by wet milling condition tends to show a lower water holding capacity, damaged starch contents and particle size, as compared to controls. However, a setback of the super-yield Korean rice flour was a higher score as compared to the controls, regardless of the milling conditions.

Physicochemical Properties of Starch Granules Isolated from Naked Barley Seeds during Germination (쌀보리의 발아과정중 분리전분의 이화학적 특성)

  • Seog, Ho-Moon;Park, Yong-Kon;Nam, Young-Jung;Kim, Jun-Pyong;Sohn, Tae-Hwa;Yoon, Hyung-Sik
    • Applied Biological Chemistry
    • /
    • v.31 no.4
    • /
    • pp.339-345
    • /
    • 1988
  • Physicochemical properties of starch isolated from the naked barley seeds during germination were investigated, The germinated barley seeds showed an apparent increase in amylose component of the starches, and water binding capacities of the starches decreased initially and then increased with longer germination time. The size frequency distribution of starch granules showed that the granules larger than $20.2{\mu}$ in diameter were preferentially degraded, and moreover the rate of degradation was higher than that of granules of any other size. It was apparent that the mean diameter of granules was $12.7{\sim}20.2{\mu}$ at all stages of germination. The results of differential scanning calorimetry, swelling power, solubility and X-ray diffraction patterns of starch granules isolated at various stages of germination showed little changes during germination. Scanning electron microscopy revealed that the starch granules have been damaged extensively by degradative enzymes during germination, but all the starch granules were not degraded uniformly.

  • PDF

Characteristics Changes of Floury-type Rice depending on Water Immersion and Heat Treatment Time

  • Seon-Min Oh;Hyun-Jin Park;Yu-Chan Choi;You-Geun Oh;Jeong-Heui Lee;Jeom-Sig Lee;Hye Sun Choi;Jieun Kwak
    • Proceedings of the Korean Society of Crop Science Conference
    • /
    • 2022.10a
    • /
    • pp.314-314
    • /
    • 2022
  • In the production of rice flour, wet milling is a method of milling rice after soaking it in water, and it takes a lot of time and cost from milling to drying. To overcome this problem, the floury type rice was developed for dry milling and it is known to have round starch granules, low content of damaged starch after milling, and a starch structure similar to wheat. Because of its unique properties different from normal rice, it is necessary to research on processing and characteristics of floury-type rice to expand its utility in the food industry. Therefore, this study aimed to prepare the pregelatinized floury type rice (Baromi2) by autoclave and investigate their physicochemical properties. As the heat treatment time increased, the brightness decreased from 83.8 to 76.8, however, both redness and yellowness increased from 0.57 to 4.5 and from 14.58 to 21.13, respectively. Despite of same treatment time, soaking in water (10 min) before autoclaving increased the solubility and swelling power of Baromi2 over 2 times. The peak viscosity of native Baromi2 was over 2000 RVU, on the other hand, there was a significantly decrease to less than 1000 RVU of pregelatinized Baromi2. Heat treatment without immersion caused partial gelatinization of starch, resulting that some starch granules maintaining their integrity. Whereas there were no starch granules in heat treatment with soaking in water due to complete gelatinization. This study would be helpful to the suggestion of using heat-treated floury-type rice as an intermediate material in the food industry in the future.

  • PDF

Development of dry milling suitable rice cultivar to invigorate rice processing products

  • Jeung, Ji-Ung
    • Proceedings of the Korean Society of Crop Science Conference
    • /
    • 2017.06a
    • /
    • pp.10-10
    • /
    • 2017
  • Rice consumption has been continuously decreasing as the eating habits of Koreans have become westernized and diversified. The per capita annual rice consumption in Korea has dropped sharply from 136.4 kg in 1970 to 61.9 kg in 2016. The Korean government, therefore, has been trying to promote rice consumption by invigorating the processed food industry using rice flour. To facilitate the market for processed rice foods, it is essential to develop proper milling technology in terms of flour particle size and damaged starch content to produce high quality rice flour at competitive cost. Dry milling and wet milling are the two major processes used to produce rice flour. Although the dry milling process is relatively simple with a lower production cost, damaged starch content increases because of the high grain hardness of rice. In wet milling, the quality of rice flour is improved by reducing flour particle size as well as damaged starch content through soaking procedures. However, the production costs are high because of the additional expenses associated with the disposal of waste water, sterilization and drying of the wet flour. Recently developed technologies such as jet milling and cryogenic milling also require expensive investment and production. Therefore, developing new rice cultivars with dry milling adaptability as well as good processing properties is an important goal of rice breeding in Korea. 'Suweon 542' is a floury endosperm mutant line derived from sodium azide treatment on a high-yield, early maturing, and non-glutinous japonica rice cultivar, 'Namil'. Compared with the wild type, after dry milling process, the grain hardness of 'Suweon 542' was significantly lower because of its round and loosely packed starch granules. Also, the flour of 'Suweon 542' had significantly smaller particles and less damaged starch than 'Namil' and other rice cultivars and its particle size distribution was similar to a commercial wheat cultivar. Recently, through collaborations with nine universities and food companies, a total of 21 kinds of processed prototypes, using the dry milling flour of 'Suweon 542', were evaluated. In the production of major rice processing products, there was no significant quality difference between the flours prepared by wet milling and dry milling. Although the amount of water added to the dough was slightly increased, it was confirmed that the recipe applying the wet flour could be used without significant change. To efficiently transfer the floury endosperm characteristics of 'Suweon 542' to other commercial rice cultivars, it is essential to develop DNA marker tightly linked to the target gene. Association analysis using 70 genome-wide SSR markers and 94 F2 plants derived from 'Suweon 542'/'Milyang 23' showed that markers on chromosome 5 explained a large portion of the variation in floury grains percentage (FGP). Further analysis with an increased number of SSR markers revealed that the floury endosperm of 'Suweon 542' was directed by a major recessive locus, flo7(t), located in the 19.33-19.86 Mbp region of chromosome 5, with RM18639 explaining 92.2% of FGP variation in the F2 population. Through further physical mapping, a co-segregate and co-dominant DNA marker with the locus, flo7(t) was successfully developed, by which, thereby, breeding efficiency of rice cultivars having proper dry milling adaptability with high yield potential or useful functional materials would be improved. 'Suweon 542' maintained the early maturity of the wild type, Namil, which can be used in rice-wheat double cropping systems in Korea not only for improved arable land but also for sharing flour production facilities. In addition to the high susceptibility against major rice diseases, nevertheless, another possible drawback of 'Suweon 542' is the high rate of viviparous under prolonged rainfall during the harvesting season. To overcome susceptibility and vivipary of 'Suweon 542', the progeny lines, derived from the crosses 'Suweon 542' and 'Jopyeong', an early maturing rice cultivar with multiple resistance against rice blast, bacterial blight, and rice strip virus, and 'Heugjinju', a anthocyanin pigment containing black rice cultivar, were intensively evaluated. As the outputs, three dry milling suitable rice elite lines, 'Jeonju614', 'Jeonju615', and 'Jeonju616' were developed.

  • PDF

Physicochemical Properties of Non-waxy Rice Flour Affected by Grinding Methods and Steeping Times (제분방법 및 수침시간을 달리한 멥쌀가루의 이화학적 특성)

  • Kim, Rae-Young;Kim, Chang-Soon;Kim, Hyuk-Il
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.38 no.8
    • /
    • pp.1076-1083
    • /
    • 2009
  • The physicochemical properties of rice flour produced by 3 different grinding methods using various steeping times (3, 6, 9, and 12 hrs) were investigated. Roller mill gave coarse rice flour; the pin mill, intermediate flour; and mixed when both (roller & pin mills) were used. With the increase of steeping times, the rice flours became finer and the contents of crude protein, crude fat and crude ash decreased. Damaged starch was noticeably high in rice flour by roller & pin mills compared to those by roller or pin mills alone. Amylose contents, solubility and swelling power increased as the steeping times increased. Water binding capacity was the highest in roller & pin mills, followed by pin mill. In scanning electron microscope (SEM), pin mill showed distribution of separated fine particles of rice flours. The physicochemical properties of rice flours showed many differences by steeping times of rice and grinding methods. With sufficient steeping times, the rice flours obtained from pin mill were relatively fine having less damaged starch.

Effects of Different Milling Methodes on Physico-chemical Properties & Products (제분방법이 쌀가루 및 제품의 특성에 미치는 영향)

  • Kum, Jun-Seok;Lee, Sang-Hyo;Lee, Hyun-Yu;Kim, Kil-Hwan;Kim, Young-In
    • Korean Journal of Food Science and Technology
    • /
    • v.25 no.5
    • /
    • pp.546-551
    • /
    • 1993
  • Rice flour obtained by four different milling methods, Pin mill. Colloid mill, Micro mill, and Jet mill, were used to investigate physico-chemical properties and product. Crude fat, ash, and protein contents of rice flours between different milling methods were similar. Blue value, amylose content, and damaged starch which related to properties of rice flour were reduced in the order that of Jet mill, Micro mill, Colloid mill, and Pin mill. Water absorption index, water solubility index, and water retention capacity increased as damaged starch increased. Hardness of gel(15%) is the highest value for Pin mill. The finer granules (Jet mill) had lower gelatinization onset(To) and peak(Tp) than any other rice flours. Those result are simillar with amylogram properties. Enthalpy of gelatinization increased as damaged starch increased. Jet mill had the highest score (p<0.05) of overall test in sensory evaluation and good paste properties.

  • PDF