• Steel and Composite Structures
• /
• v.15 no.4
• /
• pp.357-377
• /
• 2013

In order to study the degradation and damage behaviors of steel frame welded connections, two series of tests in references with different connection constructions were carried out subjected to various cyclic loading patterns. Hysteretic curves, degradation and damage behaviours and fatigue properties of specimens were firstly studied. Typical failure modes and probable damage reasons were discussed. Then, various damage index models with variables of dissipative energy, cumulative displacement and combined energy and displacement were summarized and applied for all experimental specimens. The damage developing curves of ten damage index models for each connection were obtained. Finally, the predicted and evaluated capacities of damage index models were compared in order to describe the degraded performance and failure modes. The characteristics of each damage index model were discussed in depth, and then their distributive laws were summarized. The tests and analysis results showed that the loading histories significantly affected the distributive shapes of damage index models. Different models had their own ranges of application. The selected parameters of damage index models had great effect on the developing trends of damage curves. The model with only displacement variable was recommended because of a more simple form and no integral calculation, which was easier to be formulated and embedded in application programs.

• Wind and Structures
• /
• v.13 no.2
• /
• pp.95-108
• /
• 2010

This review paper discusses research from the last few years relating to windborne debris risk models and the essential elements of engineering damage prediction models. Generic types of windborne debris are discussed. The results of studies of debris trajectories that are relevant to damage models are described - in particular the horizontal component of debris velocity as a function of distance travelled. The merits of impact momentum versus impact kinetic energy as a relevant parameter for predicting damage are considered, and how published data from generic cannon Impact tests can be used in risk models. The quantitative variation of debris impact damage with wind speed is also discussed. Finally the main elements of previously-proposed debris damage models are described.

• Journal of Aerospace System Engineering
• /
• v.3 no.4
• /
• pp.27-34
• /
• 2009

This paper deals with the lifetime prediction of Aircraft Flaperon Joint made of AISI 4130 steel. Reviews are performed on the published damage models at first. And three different damage models are used for predicting the fatigue life of the structure subjected to variable amplitude fatigue loading. These models require no increase in complexity of use, nor do they require additional material property or mission loading information to achieve the improved accuracy. Finally a comparison among the fatigue results is performed. It is observed that the Miner's rule could predict longer life than other cumulative damage models which take into account loads below the endurance limit.

• Nuclear Engineering and Technology
• /
• v.55 no.8
• /
• pp.2747-2756
• /
• 2023

Reinforced Concrete (RC) shear walls are one of the civil structures in nuclear power plants to resist lateral loads such as earthquakes and wind loads effectively. Risk-informed and performance-based regulation in the nuclear industry requires considering possible accidents and determining desirable performance on structures. As a result, rather than predicting only the ultimate capacity of structures, the prediction of performances on structures depending on different damage states or various accident scenarios have increasingly needed. This study aims to develop machine-learning models predicting drifts of the RC shear walls according to the damage limit states. The damage limit states are divided into four categories: the onset of cracking, yielding of rebars, crushing of concrete, and structural failure. The data on the drift of shear walls at each damage state are collected from the existing studies, and four regression machine-learning models are used to train the datasets. In addition, the bagging ensemble method is applied to improve the accuracy of the individual machine-learning models. The developed models are to predict the drifts of shear walls consisting of various cross-sections based on designated damage limit states in advance and help to determine the repairing methods according to damage levels to shear walls.

• Smart Structures and Systems
• /
• v.30 no.3
• /
• pp.263-271
• /
• 2022

In this paper we present an overview of damage diagnosis algorithms that have been developed over the past two decades using vibration signals obtained from structures. Then, the paper focuses primarily on algorithms that can be used following an extreme event such as a large earthquake to identify structural damage for responding in a timely manner. The algorithms presented in the paper use measurements obtained from accelerometers and gyroscope to identify the occurrence of damage and classify the damage. Example algorithms are presented include those based on autoregressive moving average (ARMA), wavelet energies from wavelet transform and rotation models. The algorithms are illustrated through application of data from test structures such as the ASCE Benchmark structure and laboratory tests of scaled bridge columns and steel frames. The paper concludes by identifying needs for research and development in order for such algorithms to become viable in practice.

• Structural Engineering and Mechanics
• /
• v.70 no.6
• /
• pp.781-791
• /
• 2019

Earthquakes most often induce damage to structures, resulting in the degradation or deterioration of integrity. In this paper, based on the experimental study on 5 RC frames with different span length and different layout of buckling-restrained braces, the seismic damage evaluation law of RC frame with buckling-restrained braces was analyzed, and then the seismic damage for different specimens was calculated using different damage models to study the damage evolution. By analyzing and comparing the observation in test and the calculated results, it could be found that, damage evolution models including Gosain model, Hwang model as well as Ou model could better simulate the development of damage during cyclic loading. Therefore, these 3 models were utilized to analyze the development of damage to better demonstrate the evolution law for structures with different layout of braces and under different axial compression ratios. The results showed that from all layouts of braces studied, the eccentrically braced frame behaved better under larger deformation with the damage growing slowly. It could be deduced that the link beam benefited the seismic performance of structure and alleviated the damage by absorbing high values of energy.

• Structural Monitoring and Maintenance
• /
• v.2 no.4
• /
• pp.383-397
• /
• 2015

This article identifies and addresses current limitations on the use of numerical models for validation and/or calibration of damage detection methodologies that are based on the analysis of the high frequency response of the structure to identify the occurrence of abrupt anomalies. Distributed-plasticity non-linear fiber-based models in combination with experimental data from a full-scale reinforced concrete column test are used to point out current modeling techniques limitations. It was found that the numerical model was capable of reproducing the global and local response of the structure at a wide range of inelastic demands, including the occurrences of rebar ruptures. However, when abrupt sudden damage occurs, like rebar fracture, a high frequency pulse is detected in the accelerations recorded in the structure that the numerical model is incapable of reproducing. Since the occurrence of such pulse is fundamental on the detection of damage, it is proposed to add this effect to the simulated response before it is used for validation purposes.

• International Journal of Ocean Engineering and Technology Speciallssue:Selected Papers
• /
• v.4 no.1
• /
• pp.31-37
• /
• 2001

In this paper, an integrated damage identification system (IDIS) is proposed to locate and size damage in real structures. The application of the IDIS to real structures includes the measurement of modal responses, the construction of damage-detection models, and the implementation of measurements and models into the damage-detection process. Firstly, the theory of the damage identification method is outlined. Secondly, the schematic and each component of the IDIS are described. Finally, the practicality of the IDIS is verified from experiments on two different bridge-models, a model plate-grider and a model truss.

• Smart Structures and Systems
• /
• v.6 no.9
• /
• pp.991-1005
• /
• 2010

The key to detecting damage to civil engineering structures is to find an effective damage indicator. The damage indicator should promptly reveal the location of the damage and accurately identify the state of the structure. We propose to use the distance measures of low-order AR models as a novel damage indicator. The AR model has been applied to parameterize dynamical responses, typically the acceleration response. The premise of this approach is that the distance between the models, fitting the dynamical responses from damaged and undamaged structures, may be correlated with the information about the damage, including its location and severity. Distance measures have been widely used in speech recognition. However, they have rarely been applied to civil engineering structures. This research attempts to improve on the distance measures that have been studied so far. The effect of varying the data length, number of parameters, and other factors was carefully studied.

• Journal of Ocean Engineering and Technology
• /
• v.30 no.5
• /
• pp.341-348
• /
• 2016

The fatigue damage caused by wide band loadings has generally been predicted using fatigue damage models in the frequency domain rather than a rain-flow counting method in the time domain because of its computation cost. This study showed that these fatigue damage models can be simplified in the form of normalized fatigue damage as a function of the S-N curve slope and bandwidth parameters. Based on numerical simulations of various wide band spectra, it was found that fatigue damage models in the form of normalized fatigue damage with one S-N curve slope and two bandwidth parameters( α₁ , α₂ ) provided less reasonable fatigue damage. Therefore, an additional bandwidth parameter needs to be considered based on a sensitivity study using various neural networks, which proved that α_1-5 would be the dominant factor of a fatigue damage model as an additional bandwidth parameter.