• Journal of Digital Contents Society
• /
• v.19 no.5
• /
• pp.899-906
• /
• 2018

In the entire process of disaster management, it is very significant to construct related information as well as perform quantitative assessment of damage losses with respect to minimizing the effect of disasters. Many countries have paid much attention not only to studying risk assessment methodologies including constructing inventories, hazard mapping, vulnerability assessment and direct/indirect damage loss estimation, but also to developing risk analysis tools investigated in this paper. We conducted comparison studies of representative earthquake damage risk analysis tools, and the result of this study is able to provide useful information to decision makers and researchers who can contribute to development of effective disaster management.

• Journal of Korean Society for Geospatial Information Science
• /
• v.14 no.1 s.35
• /
• pp.75-83
• /
• 2006

Satellite imagery is generally used for investigating the damage from natural disaster for wide area and remotely piloted vehicle or aerial photos are used for the local damage. But for more detailed information such as damages of public facilities, these methods are inadequate and so in this case field surveying has been carried out. We tried to estimate the damage of public facilities faster and more accurately using photogrammetric method. We developed a digital stereo camera system by fixing two digital cameras on a frame, and with this system the photos of actually damaged areas were collected. The damages were estimated from these stereo photos. Then the estimated data was compared with field surveying data in order to verify our system.

• Journal of Information Display
• /
• v.8 no.3
• /
• pp.5-10
• /
• 2007

Twin target sputtering (TTS) system with a configuration of vertically parallel facing Al targets and a substrate holder perpendicular to the Al target plane has been designed to realize a direct Al cathode sputtering on organic light emitting diodes (OLEDs). The TTS system has a linear twin target gun with ladder type magnet array for effective and uniform confinement of high density plasma. It is shown that OLEDs with Al cathode deposited by the TTS show a relatvely lower leakage current density $({\sim}1{\times}10^{-5}mA/cm^2)$ at reverse bias of -6V, compared to that ($1{\times}10^{-2}{\sim}10^{-3}$ $mA/cm^2$ at -6V) of OLEDs with Al cathodes grown by conventional DC magnetron sputtering. In addition, it was found that Al cathode films prepared by TTS were amorphous structure with nanocrystallines due to low substrate temperature. This demonstrates that there is no plasma damage caused by the bombardment of energetic particles. This indicates that the TTS system with ladder type magnet array could be useful plasma damage free deposition technique for direct Al cathode sputtering on OLEDs or flexible OLEDs.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.323-323
• /
• 2010

Saw damage of crystalline silicon wafer is unavoidable factor. Usually, alkali treatment for removing the damage has been carried out as the saw damage removal (SDR) process for priming the alkali texture. It usually takes lots of time and energy to remove the sawed damages for solar grade crystalline silicon wafers We implemented two different mixed acidic solution treatments to obtain the improved surface structure of silicon wafer without much sacrifice of the silicon wafer thickness. At the first step, the silicon wafer was dipped into the mixed acidic solution of $HF:HNO_3$=1:2 ration for polished surface and at the second step, it was dipped into the diluted mixed acidic solution of $HF:HNO_3:H_2O$=7:3:10 ratio for porous structure. This double treatment to the silicon wafer brought lower reflectance (25% to 6%) and longer carrier lifetime ($0.15\;{\mu}s$ to $0.39\;{\mu}s$) comparing to the bare poly-crystalline silicon wafer. With optimizing the concentration ratio and the dilution ratio, we can not only effectively substitute the time consuming process of SDR to some extent but also skip plasma enhanced chemical vapor deposition (PECVD) process. Moreover, to conduct alkali texture for pyramidal structure on silicon wafer surface, we can use only nitric acid rich solution of the mixed acidic solution treatment instead of implementing SDR.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.1
• /
• pp.59-72
• /
• 2011

The research of psychological supporting systems as safety and welfare for disaster victims damaged psychologically as well as physically by a sudden disaster to return to effectively their social life has been carried. The domestic National Emergency Management Agency(NEMA) is operating the Disaster Victim Psychology Support Center that helps with curing damaged psychology and studies the transmission system of psychology management services, the classification of victims for disaster psychology support, and emergency consultation method to systemically support disaster psychology management. However, current psychology supporting centers provide the simple information for supporting centers such as medical and social welfare organizations. The development research of IT-based management systems to obtain needed information to construct the proposed systems curing psychological damage is still primitive step. Therefore, this paper shall propose a GIS-based integrated management system for victims and managers to effectively share related information one another and to return to victims' social life as soon as possible. Also, we implement a simple prototype system based on the Web. The proposed system supports the spatial search and statistical analysis based on map as well as keyword search, because having the location information on disaster victims, damage occurrence places, welfare and medical institutions, and psychological supporting centers. In addition, this system has the advantage reducing the frequency of disaster damage by providing aids in making efficient policy systems for the managers.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.9 no.4
• /
• pp.95-101
• /
• 2013

MANET has an advantage that can build a network quickly and easily in difficult environment to build network. In particular, routing protocol that uses in existing mobile environment cannot be applied literally because it consists of only mobile node. Thus, routing protocol considering this characteristic is necessary. Malicious nodes do extensive damage to the whole network because each mobile node has to act as a router. In this paper, we propose technique that can detect accurately the suspected node which causes severely damage to the performance of the network. The proposed technique divides the whole network to zone of constant size and is performed simultaneously detection technique based zone and detection technique by collaboration between nodes. Detection based zone translates the information when member node finishes packet reception or transmission to master node managing zone and detects using this. The collaborative detection technique uses the information of zone table managing in master node which manages each zone. The proposed technique can reduce errors by performing detection which is a reflection of whole traffic of network.

• The Journal of the Korea Contents Association
• /
• v.14 no.10
• /
• pp.270-278
• /
• 2014

The stability and security management of IT data becomes more important because information security threats increases rapidly in Big Data era. The operational policy of the data backup considering information security threats is required because the backup policy is the fundamental method that prevents the damage of security threats. We present an economic approach for a data backup system with information security threats which damage the system. The backup operation consists of the differential backup and the batch backup. We present a stochastic model considering the occurrence of information security threats and their damage. We analyze the stochastic model to derive the performance measures for the cost analysis. Finally we analyze the average cost of the system and give numerical examples.

• Convergence Security Journal
• /
• v.21 no.1
• /
• pp.115-120
• /
• 2021

An O2O-based real estate brokerage web sites or apps are increasing explosively. As a result, the environment has been changed from the existing offline-based real estate brokerage environment to the online-based environment, and consumers are getting very good feelings in terms of time, cost, and convenience. However, behind the convenience of online-based real estate brokerage services, users often suffer time and money damage due to false information or malicious false information. Therefore, in this study, in order to reduce the damage to consumers that may occur in the O2O-based real estate brokerage service, we designed a false property information filtering system that can determine the authenticity of registered property information using artificial intelligence technology. Through the proposed research method, it was shown that not only the authenticity of the property information registered in the online real estate service can be determined, but also the temporal and financial damage of consumers can be reduced.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.31 no.5
• /
• pp.1001-1010
• /
• 2021

Smart factories are complex systems which combine latest information technology (IT) with operation technology (OT). A smart factory aims to provide manufacturing capacity improvement, customized production, and resource reduction with these complex technologies. Although the smart factory is able to increase the efficiency through the technologies, the security level of the whole factory is low due to the vulnerability transfer from IT. In addition, the response and restoration of the business continuity plan are insufficient in case of damage due to the absence of factory security experts. The cope with the such problems, we propose an information security practice content for analyzing the damage by generating ransomware attacks in a digital twin-based smart factory similar to the real world. In our information security content, we introduce our conversion technique of physical devices into virtual machines or simulation models to build a practical environment for the digital twin. This content generates two types of the ransomware attacks according to a defined scenario in the digital twin. When the two generated attacks are successfully completed, at least 8 and 5 of the 23 virtual elements are take damage, respectively. Thus, our proposed content directly identifies the damage caused by the generation of two types of ransomware in the virtual world' smart factory.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.7
• /
• pp.9-16
• /
• 1999

We have investigated effects of local damage accumulation for ultra-low energy As and B ion implant using highly efficient molecular dynamics(MD) scheme. We simulated ion implantation by MD simulation using recoil ion approximation (RIA) method and local cell damage accumulation (LCDA) model proposed in the paper. Local damage accumulation probability function consisted of deposited energy in a unit cell, implant dose rate, target material, projectile atom, and recoil event number. The simulated results were good agreement with the experimental and other simulated results. The MDRANGE results without damage accumulation were different from SIMS data in the tail region. We also simulated 2 dimensional dopant and damage profiles using the local damage accumulation model and recoil ion approximation method.