• 제목/요약/키워드: damage fraction

검색결과 355건 처리시간 0.029초

페라이트기 9Cr 내열강의 크리프-피로손상에 따른 미세조직 및 초음파 비파괴평가 (Microstructural Evolution and Ultrasonic Nondestructive Evaluation During Creep-Fatigue of 9Cr Ferritic Heat-Resisting Steel)

  • 김정석;권숙인;박익근
    • 한국재료학회지
    • /
    • 제17권8호
    • /
    • pp.425-432
    • /
    • 2007
  • The microstructural evolution of ferritic 9Cr-1Mo-V-Nb steel, subjected to creep-fatigue at $550^{\circ}C$, was evaluated nondestructively by measuring the ultrasonic velocity. The variation of the ultrasonic velocity with the fatigue life fraction exhibited three regions. In the first region ($N/N_f$<0.2), a significant increase in the velocity was observed, followed by a slight increase between the fatigue life fractions of $0.2N_f$ and $0.8N_f$, and then a decrease in the final region. The change of the ultrasonic velocity during creep-fatigue was interpreted in relation to the microstructural properties. This study proposes an ultrasonic nondestructive evaluation method of quantifying the level of damage and microstructural change during the creep-fatigue of ferritic 9Cr-1Mo-V-Nb steel.

나선유로에 의한 태양열 축열조 성층화 촉진(제1보 실증실험) (Enhancement of Stratification for Solar Water Storage Tank with Spiral Jacket and Coil(Part 1:Verification Experiment))

  • 권재욱;홍희기
    • 설비공학논문집
    • /
    • 제24권4호
    • /
    • pp.336-342
    • /
    • 2012
  • Large-scale active solar heat systems are generally using heat exchanger between collector and storage tank loops to prevent damage by freezing. It is difficult to maintain stratification in a storage tank in the system owing to greater flow rate enhancing heat transfer. In the previous study, we introduced a spiral-jacketed storage tank and obtained good results to keep system performance of general level without better stratification. We added a scroll-shaped heat exchanger coil on the upper part in the spiral-jacketed storage tank. As a result of the experiment, it was verified that degree of stratification of the new type storage tank is higher than that of the previous one with a possibility of better collector efficiency and solar fraction.

Genetic Toxicity Test of 1,2-Dibromoethane by Ames, Micronucleus, Comet Assays and Microarray Analysis

  • Kim, Ki-Y.;Kim, Ji-H.;Kwon, Kyoung-J.;Go, Seo-Y.;Min, Kyung-N.;Lee, Woo-S.;Park, Sue-N.;Shee, Yhun-Y.
    • Biomolecules & Therapeutics
    • /
    • 제14권4호
    • /
    • pp.246-252
    • /
    • 2006
  • 1,2-Dibromoethane(DBE) has been widely used as a soil fumigant, an additive to leaded gasoline and an industrial solvent. In this study, we have carried out in vitro genetic toxicity test of 1,2-dibromoethane and microarray analysis of differentially expressed genes in response to 1,2-dibromoethane. 1,2-Dibromoethane showed mutations in base substitution strain TA1535 both with and without exogenous metabolic activation. 1,2-Dibromoethane showed mutations in frame shift TA98 both with and without exogenous metabolic activation. 1,2-Dibromoethane showed DNA damage based on single cell gel/comet assay in L5178Y cells both with and without exogenous metabolic activation. 1,2-Dibromoethane increased micronuclei in CRO cells both with and without exogenous metabolic activation. Microarray analysis of gene expression profiles in L5178Y cells in response to 1,2-dibromoethane selected differentially expressed 241 genes that would be candidate biomarkers of genetic toxic action of 1,2-dibromoethane.

다단 미세 치형 허브 기어의 프레스 성형기술개발 (Development of Press Forming Technology for the Multistage Fine Tooth Hub Gear)

  • 김동환;이정민;이상호;변현상;김병민
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2005년도 추계학술대회 논문집
    • /
    • pp.769-772
    • /
    • 2005
  • This paper deals with the aspects of die design for the multistage fine tooth hub gear in the cold forging process. In order to manufacture the cold forged product fur the precision hub gear used as the ARD 370 system of bicycle, it examines the influences of different designs on the metal flow through experiments and FE-simulation. To find the combination of design parameters which minimize the damage value, the low gear length, upper gear length and inner diameter as design parameters are considered. An orthogonal fraction factorial experiment is employed to study the influence of each parameter on the objective function or characteristics. The optimal punch shape of fine tooth hub gear is designed using the results of FE-simulation and the artificial neural network. To verify the optimal punch shape, the experiments of the cold forging of the hub gear are executed.

  • PDF

Development of a radiological emergency evacuation model using agent-based modeling

  • Hwang, Yujeong;Heo, Gyunyoung
    • Nuclear Engineering and Technology
    • /
    • 제53권7호
    • /
    • pp.2195-2206
    • /
    • 2021
  • In order to mitigate the damage caused by accidents in nuclear power plants (NPPs), evacuation strategies are usually managed on the basis of off-site effects such as the diffusion of radioactive materials and evacuee traffic simulations. However, the interactive behavior between evacuees and the accident environment has a significant effect on the consequential gap. Agent-based modeling (ABM) is a method that can control and observe such interactions by establishing agents (i.e., the evacuees) and patches (i.e., the accident environments). In this paper, a radiological emergency evacuation model is constructed to realistically check the effectiveness of an evacuation strategy using NetLogo, an ABM toolbox. Geographic layers such as radiation sources, roads, buildings, and shelters were downloaded from an official geographic information system (GIS) of Korea, and were modified into respective patches. The dispersion model adopted from the puff equation was also modified to fit the patches on the geographic layer. The evacuees were defined as vehicle agents and a traffic model was implemented by combining the shortest path search (determined by an A * algorithm) and a traffic flow model incorporated in the Nagel-Schreckenberg cellular automata model. To evaluate the radiological harm to the evacuees due to the spread of radioactive materials, a simple exposure model was established to calculate the overlap fraction between the agents and the dispersion patches. This paper aims to demonstrate that the potential of ABM can handle disaster evacuation strategies more realistically than previous approaches.

Synergistic anticancer activity of resveratrol in combination with docetaxel in prostate carcinoma cells

  • Lee, Sang-Han;Lee, Yoon-Jin
    • Nutrition Research and Practice
    • /
    • 제15권1호
    • /
    • pp.12-25
    • /
    • 2021
  • BACKGROUND/OBJECTIVES: The study was conducted to investigate the efficacy of the combination treatment of phytochemical resveratrol and the anticancer drug docetaxel (DTX) on prostate carcinoma LNCaP cells, including factors related to detailed cell death mechanisms. MATERIALS/METHODS: Using 2-dimensional monolayer and 3-dimensional spheroid culture systems, we examined the effects of resveratrol and DTX on cell viability, reactive oxygen species (ROS) levels, mitochondrial membrane potential, apoptosis, and necroptosis by MTT, flow cytometry, and Western blotting. RESULTS: At concentrations not toxic to normal human prostate epithelial cells, resveratrol effectively decreased the viability of LNCaP cells depending on concentration and time. The combination treatment of resveratrol and DTX exhibited synergistic inhibitory effects on cell growth, demonstrated by an increase in the sub-G0/G1 peak, Annexin V-phycoerythrin positive cell fraction, ROS, mitochondrial dysfunction, and DNA damage response as well as concurrent activation of apoptosis and necroptosis. Apoptosis and necroptosis were rescued by pretreatment with ROS scavenger N-acetylcysteine. CONCLUSIONS: We report resveratrol as an adjuvant drug candidate for improving the outcome of treatment in DTX therapy. Although the underlying mechanisms of necroptosis should be investigated comprehensively, targeting apoptosis and necroptosis simultaneously in the treatment of cancer can be a useful strategy for the development of promising drug candidates.

Pine Needle Extract Applicable to Topical Treatment for the Prevention of Human Papillomavirus Infection

  • Lee, Hee-Jung;Park, Mina;Choi, HeeJae;Nowakowska, Aleksandra;Moon, Chiung;Kwak, Jong Hwan;Kim, Young Bong
    • Journal of Microbiology and Biotechnology
    • /
    • 제31권1호
    • /
    • pp.137-143
    • /
    • 2021
  • Most cervical cancers are associated with high-risk human papillomavirus (HPV) infection. Currently, cervical cancer treatment entails surgical removal of the lesion, but treatment of infection and preventing tissue damage are issues that still remain to be addressed. Herbal medicine and biological studies have focused on developing antiviral drugs from natural sources. In this study, we analyzed the potential antiviral effects of Pinus densiflora Sieb. et Zucc. leaf extracts against HPV. The pine needle extracts from each organic solvent were analyzed for antiviral activity. The methylene chloride fraction (PN-MC) showed the highest activity against HPV pseudovirus (PV). The PN-MC extract was more effective before, rather than after treatment, and therefore represents a prophylactic intervention. Mice were pre-treated with PN-MC via genital application or oral administration, followed by a genital or subcutaneous challenge with HPV PV, respectively. The HPV challenge results showed that mice treated via genital application exhibited complete protection against HPV. In conclusion, PN-MC represents a potential topical virucide for HPV infection.

Creep analysis of plates made of functionally graded Al-SiC material subjected to thermomechanical loading

  • Majid Amiri;Abbas Loghman;Mohammad Arefi
    • Advances in concrete construction
    • /
    • 제15권2호
    • /
    • pp.115-126
    • /
    • 2023
  • This paper investigates creep analysis of a plate made of Al-SiC functionally graded material using Mendelson's method of successive elastic solution. All mechanical and thermal material properties, except Poisson's ratio, are assumed to be variable along the thickness direction based on the volume fraction of reinforcement and thickness. First, the basic relations of the plate are derived using the Love-Kirchhoff plate theory. The solution of governing equations yields an elastic solution to start creep analysis. The creep behavior is demonstrated through Norton's equation based on Pandey's experimental results extracted for Al-SiC functionally graded material. A linear variation is assumed for temperature distribution along the thickness direction. The creep strain, as well as the thermal strain, are included in the governing equations derived from classical plate theory for mechanical strain. A successive elastic solution based on Mendelson's method is employed to derive the history of stresses, strains, and displacements over a long time. History of stresses and deformations are obtained over a long time to predict damage to the plate because of various loadings, and material composition along the thickness and planar directions.

복부 방사선 조사에서 총 선량 및 회복기간에 따른 마우스 소장의 급만성 효과 -손상 및 회복의 병리조직학적 변화- (Early and Late Effect of External Abdominal Irradiation on Small Intestine of Mice at Various Total Dose and Intervals - Histopathologc Aspects of Damage and Recovery -)

  • 김명세;최원희
    • Radiation Oncology Journal
    • /
    • 제5권1호
    • /
    • pp.1-11
    • /
    • 1987
  • 복부 및 골반부의 방사선 조사에서 정상소장의 손상은 대장에 비해 발생빈도는 낮다고 하나 때로는 치명적일수도 있음으로 치료선량을 제한시키는 가장 큰 원인 중의 하나이다. 많은 연구 및 임상보고가 있어 왔으나 동물실험의 경우 대부분이 단일조사 혹은 소수 분할조사에 의한 실험이었으며 인체의 경우 심한 합병증으로 인한 적출물의 생경 혹은 부검소견이 대부분이어서 임상에서와 같은 방법의 체계적인 실험에 의한 보고는 드물다. 이에 저자는 총 396마리의 마우스를 사용하여 전복부에 $2{\times}3cm$의 조사야로 $200{\times}51/wk$로 조사한 후 전 조사량 및 추적기간별로 구분하여 병리조직학적인 소장의 손상정도와 그 회복 및 잔여변화를 관찰하였다. 소낭세포의 분열감소, 융모의 단축, 점막궤양 등의 급성변화는 3,000cGy 이하의 선량에서는 1-2주 이내에 회복되었으나 4,000-5,000cGy군에서 잔여변화가 상당기간 동안 관찰되었다. 소 혈관벽의 비후, 소장점막의 섬유화 및 위축, 만성궤양 등의 후기 면화는 4,000-5,000cGy 조사군의 $2{\sim}3$주 후의 표본에서 현저히 나타나기 시작하여 시간이 경과함에 따라 약간의 회복을 보여주었으나 잔여변화는 15주까지 계속 관찰되었다. 동물실험에서 얻어진 결과를 임상에 직접 적용시키기는 어렵다고 하겠으나 임상에서 흔히 사용되는 선량인 5,000cGy이하에서도 지속적인 만성합병증이 가능함을 보여, 보다나은 임상결과를 위해서는 총선량, 선량율, 분할선량, 조사야 등의 예후에 영향을 줄 수 있는 모든 여건들의 적절한 가감이 필요함을 시사하였다.

  • PDF

Genetic Toxicity Test of o-Nitrotoluene by Ames, Micronucleus, Comet Assays and Microarray Analysis

  • Lee, Eun-Mi;Lee, So-Youn;Lee, Woo-Sun;Kang, Jin-Seok;Han, Eui-Sik;Go, Seo-Youn;Sheen, Yhun-Yong;Kim, Seung-Hee;Park, Sue-Nie
    • Molecular & Cellular Toxicology
    • /
    • 제3권2호
    • /
    • pp.107-112
    • /
    • 2007
  • o-Nitrotoluene is used to synthesize artificial dyes and raw materials of urethane resin. In this study, we have carried out in vitro genetic toxicity tests and microarray analysis to understand the underlying mechanisms and the mode of action of toxicity of onitrotoluene. TA1535 and TA98 cells were treated with o-nitrotoluene to test its toxicity by basic genetic toxicity test. Ames and two new in vitro micronucleus and COMET assays were applied using CHO cells and L5178Y cells, respectively. In addition, microarray analysis of differentially expressed genes in L5178Y cells in response to o-nitrotoluene was analyzed using Affymatrix genechip. The result of Ames test was that o-nitrotoluene treatment did not increase the mutations both in base substitution strain TA1535 and in frame shift TA98. o-Nitrotoluene has not increased micronuclei in CHO cells. But onitrotoluene increased DNA damage in L5178Y cell. Two-hundred two genes were initially selected as differentially expressed genes in response to o-nitrotoluene by microarray analysis and forty four genes among them were over 2 times of log fold changed. These forty four genes could be candidate biomarkers of genetic toxic action of o-nitrotoluene related to induction of mutation and/or induction of micronuclei and DNA damage. Further confirmation of these candidate markers related to the DNA damage will be useful to understand the detailed mechanism of action of o-nitrotoluene.