• Genomics & Informatics
• /
• v.2 no.2
• /
• pp.67-74
• /
• 2004

Cells consistently face stressful conditions, which cause them to modulate a variety of intracellular processes and adapt to these environmental changes via regulation of gene expression. Hyperosmotic and oxidative stresses are significant stressors that induce cellular damage, and finally cell death. In this study, oligonucleotide microarrays were employed to investigate mRNA level changes in cells exposed to hyperosmotic or oxidative conditions. In addition, since heat shock protein 70 (HSP70) is one of the most inducible stress proteins and plays pivotal role to protect cells against stressful condition, we performed microarray analysis in HSP70-overexpressing cells to identify the genes expressed in a HSP70-dependent manner. Under hyperosmotic or oxidative stress conditions, a variety of genes showed altered expression. Down­regulation of protein phosphatase1 beta (PP1 beta) and sphingosine-1-phosphate phosphatase 1 (SPPase1) was detected in both stress conditions. Microarray analysis of HSP70-overexpressing cells demonstrated that diverse mRNA species depend on the level of cellular HSP70. Genes encoding Iysyl oxidase, thrombospondin 1, and procollagen displayed altered expression in all tested conditions. The results of this study will be useful to construct networks of stress response genes.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.5
• /
• pp.425-430
• /
• 2009

$ZrO_2$ film was deposited by facing target sputtering (FTS) system on polyethylene naphthalate (PEN) substrate as a gas barrier layer for flexible organic light emitting devices (FOLEDs), In order to control the heat of the FTS system caused by the ion bombardment in the cathode compared with the conventional sputtering system, the process characteristics of the FTS apparatus are investigated under various sputtering conditions such as the distance between two targets ($d_{TT}$), the distance between the target and the substrate ($d_{TS}$), and the deposition time. The $ZrO_2$ film by the FTS system can reduce the damage on the films because the ion bombardment with high-energy particles like gamma-electrons, Moreover, the $ZrO_2$ film with optimized condition ($d_{TT}$=140 mm) as a function of the distance from center to edge showed a very uniform thickness below 5 % for a deposition time of 3 hours, which can improve the interface property between the anode and the plastics substrate for flexible displays, It is concluded that the $ZrO_2$ film prepared by the FTS system can be applied as a gas barrier layer or an interlayer between the anode and the plastic substrate with good properties of an uniform thickness and a low deposition-temperature.

• Structural Engineering and Mechanics
• /
• v.53 no.2
• /
• pp.311-324
• /
• 2015

The purpose of this study was to investigate experimentally the fatigue performance of reinforced concrete (RC) beams with hot-rolled ribbed fine-grained steel bars of yielding strength 500MPa (HRBF500). Three rectangular and three T-section RC beams with HRBF500 bars were constructed and tested under static and constant-amplitude cyclic loading. Prior to the application of repeated loading, all beams were initially cracked under static loading. The major test variables were the steel ratio, cross-sectional shape and stress range. The stress evolution of HRBF500 bars, the information about crack growth and the deflection developments of test beams were presented and analyzed. Rapid increases in deflections and tension steel stress occured in the early stages of fatigue loading, and were followed by a relatively stable period. Test results indicate that, the concrete beams reinforced with appropriate amount of HRBF500 bars can survive 2.5 million cycles of constant-amplitude cyclic loading with no apparent signs of damage, on condition that the initial extreme tensile stress in HRBF500 steel bars was controlled less than 150 MPa. It was also found that, the initial extreme tension steel stress, stress range, and steel ratio were the main factors that affected the fatigue properties of RC beams with HRBF500 bars, whose effects on fatigue properties were fully discussed in this paper, while the cross-sectional shape had no significant influence in fatigue properties. The results provide important guidance for the fatigue design of concrete beams reinforced with HRBF500 steel bars.

• Corrosion Science and Technology
• /
• v.3 no.5
• /
• pp.198-208
• /
• 2004

Although there has been no general agreement on the mechanism of primary water stress corrosion cracking (PWSCC) as one of major degradation modes of Ni-base alloys in pressurized water reactors (PWR's), common postulation derived from previous studies is that the damage to the alloy substrate can be related to mass transport characteristics and/or repair properties of overlaid oxide film. Recently, it was shown that the oxide film structure and PWSCC initiation time as well as crack growth rate were systematically varied as a function of dissolved hydrogen concentration in high temperature water, supporting the postulation. In order to understand how the oxide film composition can vary with water chemistry, this study was conducted to characterize oxide films on Alloy 600 by an in-situ Raman spectroscopy. Based on both experimental and thermodynamic prediction results, Ni/NiO thermodynamic equilibrium condition was defined as a function of electrochemical potential and temperature. The results agree well with Attanasio et al.'s data by contact electrical resistance measurements. The anomalously high PWSCC growth rate consistently observed in the vicinity of Ni/NiO equilibrium is then attributed to weak thermodynamic stability of NiO. Redox-induced phase transition between Ni metal and NiO may undermine the integrity of NiO and enhance presumably the percolation of oxidizing environment through the oxide film, especially along grain boundaries. The redox-induced grain boundary oxide degradation mechanism has been postulated and will be tested by using the in-situ Raman facility.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.2
• /
• pp.256-268
• /
• 1999

Submerged implants require secondary surgical uncovering of implants after healing period of 3-6 months. In surgical methods, there are surgical scalpel, tissue punch, electro-surgical, and laser-used uncovering, and so forth The objectives of this study are investigation and assessment of 1) thermal change in clinical application for uncovering of HA-coated implant and pure titanium implant irradiated by pulsed Nd-YAG, $CO_2$, and Er-YAG laser. 2) surface change of cover screws aaer irradiation using laser energy. The temperature of apex & side wall of implants were recorded at 10sec, 20sec, 30sec after 30sec irradiation to implant healing screw; 1) pulsed Nd-YAG laser; 2W, 20pps, contact mode 2) $CO_2$ laser; water-infused & non-water infused state, 2.5-3.5W, contibuous mode, noncontact mode 3) $CO_2$ laser ; non-water infused state, 3W, superpulse, noncontact. mode 4) Er-YAG laser; (1) non-water infused state, 10pps, 60mj, contact mode (2) water-infused state, 10pps, 60mj, 80mj, 101mj, contact mode. According to the results of this study, pulsed Nd-YAG laser is not indicated because of increased thermal change and pitting of metal surface of implant cover screw. By contrast, $CO_2$ laser & Er-YAG laser are presumed to indicate because of narrow range of thermal change & near abscence of thermal damage of metal surface. Dental laser is thought to be much helpful to surgical procedure when it is used as optimal power and time condition considering characteristics and indications of each laser. Further research is needed to verify that these techniques are safe and beneficial to implant success.

• Animal cells and systems
• /
• v.16 no.4
• /
• pp.329-336
• /
• 2012

This study evaluated ecological health, using various biomarkers and bioindicators, of pale chub (Zacco platypus) as a sentinel species, in Daejeon Stream, South Korea, during AprilMay 2011. The biomarkers and bioindicators were compared among three sites of control: Reference ($C_z$), transition ($T_z$), and the urban zones ($U_z$); and the 7-Ethoxyresorufin-O-deethylase (EROD) activity, DNA damage, acetylcholinesterase (AChE) activity, and vitellogenin (VTG) concentrations were more significantly increased in the $U_z$ than in the $C_z$. Also, physiological markers such as condition factor, liver somatic index, visceral somatic index, and gonad somatic index were significantly increased in the $U_z$ than in the $C_z$. For the health assessments, three categorized parameters of blood chemistry, molecular biomarkers, and physiological bioindicators were standardized and calculated as a star-plot, representing values of Integrated Health Response (IHR). Values of IHR had more significant (P<0.05) increases in the $U_z$ than any other zones, indicating an impairment of ecological health by organic matter, nutrients (N, P), and toxic chemicals. This study is based on low levels of biological organization approach of molecular and physiological biomarkers and bioindicators, so further study of high-levels of biological organization approach such as community and population is required for overall range of health assessments. The approach of IHR values, however, may be useful in providing early warning of future impacts on ecological health.

• Journal of Life Science
• /
• v.24 no.9
• /
• pp.1019-1024
• /
• 2014

Skeletal muscle atrophy can be defined as a decrease in or a disease of the muscle tissue, or as a disorder of the nerves that control the muscle, through injury or lack of use. This condition is associated with reactive oxygen species (ROS), resulting in various muscular disorders. Exposure to ROS induces muscle atrophy through several biological factors, such as SOD1 and HSP70. We found that cymbidium root extract reduced the $H_2O_2$-induced viability loss in C2C12 myoblasts and inhibited apoptosis. In addition, we showed that the cymbidium root extract increased the expression of HSP70 and decreased the expression of SOD1 in the $H_2O_2$-induced C2C12 myoblasts. These results suggest that cymbidium root extract might have therapeutic value in reducing ROS-induced muscle atrophy.

• Korean Journal of Microbiology
• /
• v.5 no.2
• /
• pp.79-85
• /
• 1967

Kim, Jong Hyup., (Div. of Biology, Atomic Energy Research Institute,Korea.;) Studies on the Cellulor Metabolism in Microorganisms as influenced by Gamma-irradiation(III): On the Changes of Free Amino acid Pool and content of Protein in Yeast clls irradiated by .gamma.-ray. 1. The strain of Saccharomyces cerevisiae had been cultured synchronously in aerobic condition and irradiatel by gamma-ray from the source of cobalt-60. Drying in vacuum oven at $90^{\circ}C$ C over 12 hours, then changes of protein content (Kjeldahl) and free amino acid pool have been assayed with use of spectrophotometer. Results obtained were compared with those of unirradiated normal cells. 2. It is proved that amount of protein content in the irradiated cells increases to seven percent more than those of normal cells in the same weight of dried samples. It seems like carbohydrate breakown had been stimulated by irradiation and that relative contents of protein shows higher values than those of normal in the same weight of samples. 3. The amount of free amino acid pool in the irradiated cells shows less value about ten percent than those of normal cells, and rate of decreasing is also weak than those of standard reagent solution of amino acid. We may assume that free amino acid pool would be protected against radiation damage in living cells and more stable than in vitro. 4. The component of free amino acid pool have been assayed on second dimensional paper chromatogram, and the identified amino acids are as follows; aspartic acid, serine, glutamic acid, cystine, lysine, glycine, threonine, histidine, arginine, tyrosine, phenylalanine, valine and leucine. 5. Distributional presence of free amino acids are identical to that of normal cells except arginine, it is cosumable that radiation effect is univerlsal to all amino acid. However it is obvious that there are differences in radiolabilities of amino acids in irradiated cells.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.643-646
• /
• 2007

As increase of the land price at downtown area, it makes people more and more interested of improving the space utilization such as makes buildings bigger, deeper and higher. Therefore, the importance of the underground construction which is the basic principle has been increased. As constructors have to complete underground construction as soon as possible with the minimum costs, they concentrate on the whole process of underground structure. Although they makes every these efforts, construction failure still happen because of the uncertainty of the condition of soil and the unexpected danger of underground construction. To make matter worse, there are only some examples without detailed information like 'how much this breakdown damage to the construction?' so it is the anther problem that most of people doesn't recognize the economical negative impact of underground structure breakdown. This report would make people understood the importance and risk of the underground construction by showing some analysis which was assumed from the real accidents.

• Journal of the Korean Society of Safety
• /
• v.27 no.6
• /
• pp.185-191
• /
• 2012

Rear collisions to expressway work trucks result many casualties these days. But, currently, no special measure are being taken except deploying sign trucks behind the working trucks. In the U.S and Europe, trucks with TMA(Truck Mounted Attenuator) are being deployed behind the working truck, which is regarded as the standard method for work area safety, thereby reducing the fatality rates and property damage tremendously. Also, standard for the performance of TMA are established and TMA can be used in the field only when it satisfies the standard. In Korea, neither the standard for nor any guide to the TMA exists. In the situation some manufacturer developed TMA without proper performance evaluation and marketed limited number of TMAs in the field. In the study, NCHRP350, which is the performance standard of expressway safety features of U.S. and materials related to the TMA standard in Europe have been reviewed to establish the Korean performance criteria. Based on the review, and incorporating existing Korean standard for crash cushions, domestic standard for TMA has been proposed and applied in developing Korean TMA and crash tested it to verify the performance. The original design developed was crash tested and modified. The newly proposed design was studied using impact simulation program several times. Modifications were made after each simulation and prototype was built and crash tested as per the newly established TMA performance criteria.