• 한국수자원학회논문집
• /
• 제44권3호
• /
• pp.209-220
• /
• 2011

입력자료의 불확실성은 강우-유출 모의에서 중요한 불확실성 요소 중의 하나이다. 본 연구에서는 먼저 세 가지의 서로 다른 내삽 기법을 통해 계산된 강수 입력 자료 (관측값을 각 소유역의 중심점으로 내삽하여 추정한 입력자료임)들이 강우-유출 모형에 미치는 영향을 분포형 수문모형 (PRMS)을 이용하여 분석하였으며, 내삽오차를 바탕으로 발생한 입력자료를 앙상블 유량 예측에 이용하는 과정을 수문학적으로 서로 다른 두개 하천 유역에 적용하였다. 또한 Monte Carlo기법을 이용하여 수문 모형의 매개변수가 서로 다른 입력자료의 특성에 따라 변화하는 양상을 구분하여 보았다. 본 연구에서 제시된 앙상블 유량 예측방법은 기상 예측 및 기상 모형의 결과물 등의 입력자료를 이용함으로써 중/장기 유량 예측에 활용될 수 있을 것으로 판단된다.

• 한국물환경학회지
• /
• 제26권5호
• /
• pp.841-849
• /
• 2010

Soil erosion is an natural phenomenon. However accelerated soil erosion has caused many environmental problems. To reduce soil loss from a watershed, many management practices have been proposed worldwide. To develop proper and efficient soil erosion best management practices, soil erosion rates should be estimated spatially and temporarily. The Universal Soil Loss Equation (USLE) and USLE-based soil erosion and sediment modelling systems have been developed and tested in many countries. The Sediment Assessment Tool for Effective Erosion Control (SATEEC) system has been developed and enhanced to provide ease-of-use interface to the USLE users. However many researchers and decision makers have requested to enhance the SATEEC system for simulation of soil erosion and sediment reflecting effects of single storm event. Thus, the SATEEC R factors were estimated based on 5 day antecedent rainfall data. The SATEEC 2.1 daily R factor was applied to the study watershed and it was found that the R2 and EI values (0.776 and 0.776 for calibration and 0.927 and 0.911 for validation) with the daily R were greater than those (0.721 and 0.720 for calibration and 0.906 and 0.881 for validation) with monthly R, which was available in the SATEEC 2.0 system. As shown in this study, the SATEEC with daily R can be used to estimate soil erosion and sediment yield at a watershed scale with higher accuracy. Thus the SATEEC with daily R can be efficiently used to develop site-specific soil erosion best management practices based on spatial and temporal analysis of soil erosion and sediment yield at a daily-time step, which was not possible with USLE-based soil erosion modeling system.

• 한국농림기상학회지
• /
• 제2권4호
• /
• pp.175-182
• /
• 2000

표준관측소의 점 단위 기온 관측 및 예보값을 농업분야에서 활용하기 위해서는 공간내삽이 필요한 경우가 많지만 기후학적 평년값 같은 장기간의 평균값 내삽과는 달리 지형효과를 반영하기 어려워 거리역산가중법이 수정 없이 사용되고 있다. 우리 나라처럼 지형이 복잡한 산악지역에서는 수평 거리에만 의존한 내삽 결과에 심각한 오류가 포함될 수 있으므로, 영농지원 정보로서 중요한 일 최저기온을 대상으로 추정오차의 최대근원인 해발고도의 영향을 보정 할 수 있는 간단한 공간내삽모형을 작성하였다. 먼저 남한 육지 상에 위치한 63개 표준관측소에서 수집된 일 최저기온자료와 관측소의 위치, 해안으로부터 거리, 경사향, 표고 등 국지기온 결정인자를 회귀분석 하여 표고에 따른 기온감율 추정식을 날짜의 함수로 표현하였다. 63개 관측점의 표고값을 공간내삽 하여 재구성한 전국의 가상 지형으로부터 1 km$\times$ 1 km 공간단위의 전국 수치고도값 편차를 계산하고, 여기에 해당 날짜의 기온감율을 적용하여 보정값을 계산한다. 기존의 거리역산가중법에 의한 기온추정값을 이 보정값에 의해 수정함으로써 최종 기온값을 얻는다. 임의로 선발된 1999년의 월별 하루씩 총 12일에 대하여 이 모형과 기존 거리역산가중법을 각기 적용하여 267개 자동기상관측지점의 일 최저기온을 추정한후 실측값과 비교하였다 오차평균, 절대오차평균, 그리고 평방근오차평균 등 세가지 추정오차를 분석한 결과 이 방법이 거리역산가중법에 비해 산악지역에서의 일 최저기온 추정에 있어 뚜렷한 개선효과를 보였다.

• 재활복지
• /
• 제22권4호
• /
• pp.1-22
• /
• 2018

본 연구는 일상생활에서 스스로 자신의 통증을 관리할 수 있도록 키네시오 테이핑 자가적용 교육을 적용하여 만성요통 여성들을 대상으로 통증과 만족도 및 보행에 미치는 영향을 분석하고자 하였으며, 키네시오 테이핑 자가적용에 대한 기초자료를 제공하고자 수행되었다. 연구대상자는 만성요통 여성 30명이며, 키네시오 테이핑 적용을 2주간 실시한 후 자가적용 교육에 따른 자가적용을 4주간 실시하였다. 대상자들의 통증 평가는 Visual Analog Scale (VAS)을 활용하였으며, 만족도의 분석은 Canadian Occupational Performance Measure (COPM)를 활용하였다. 또한, 보행의 분석은 Walkway MG-1000 보행분석기를 활용하여 Stride length, Step length, Step width and Gait time을 분석하였다. 그 결과 테이핑 적용에 따라 통계적으로 유의미한 통증의 감소와 만족도의 증가, 보행 능력의 증가가 지속적으로 나타남을 확인할 수 있었다. 또한, 대비검정 분석결과 처치 내 효과검증에서 통증, 만족도 및 보행 분석결과 에서 (처치 전과 테이핑 적용 2주 후) 통계적인 유의미한 차이가 나타났으며, Step width와 만족도 분석결과에서 (처치 전과 테이핑 적용 2주 후)와 (자가적용교육에 따른 자가적용 4주 후) 통계적으로 유의미한 차이가 나타났다. 자기관리능력의 향상은 만성통증 환자들에게 필수적이며, 일상생활에서 스스로 관리하여 적용할 수 있어야 한다. 따라서, 적극적이고 지속적인 통증관리를 위한 자기관리능력의 향상을 위해 키네시오 테이핑 자가적용 교육의 적용을 고려해야 할 것이다.

• 대한안전경영과학회지
• /
• 제6권4호
• /
• pp.83-97
• /
• 2004

The growing importance of product quality is becoming more and more daily apparent as we enter the age of globalization around the world. And the product safety is getting more focus as well as product quality. As a result, many domestic companies are putting a lot of emphasis on safety measures and management activities and these companies' products are mainly superior to other companies' product. When we separate the product quality procedure into 3 steps, i.e. quality secure-quality confirm-quality guarantee, of course the 1st step is the most important, but also End step of product quality confirm process is important. And in mass production environment, sampling inspection is more desirable than the 100 % inspection procedure. As a part of globalization trend, KS system is also being revised and reestablished based on ISO, IEC, etc. which are based on international standard. Conventional KS sampling inspection standards were in many areas quite different from ISO sampling standards, only KS A 3102, 3104, 3151 are left and the rest become obsolete, and even the ones that are still around are planned to the gone step by step. It has been already 3 years since the new KS A ISO 2859-0-3 sampling inspection process has been established which the abolition of the popular KS A 3101, KS A 3105, KS A 3109, yet the implementation rate is very slow. This study will attempt to analyze the new KS A ISO 2859-2 and KS A ISO 2859-3, and try to understand the difference as that the new standard can be easily understood and used widely among companies, by using examples. Our attempt is to help implement with the companies with active safety involvement but the final result can be spread among other companies as well in the near future.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2004년도 추계학술대회
• /
• pp.153-164
• /
• 2004

The growing importance of product quality is becoming more and more daily apparent as we enter the age of globalization around the world. And the product safety is getting more focus as well as product quality. As a result, many domestic companies are putting a lot of emphasis on safety measures and management activities and these companies' products are mainly superior to other companies' product. When we separate the product quality procedure into 3 steps, i.e. quality secure-quality confirm-quality guarantee, of course the 1st step is the most important, but also 2nd step of product quality confirm process is important. And in mass production environment, sampling inspection is more desirable than the $100\;\%$ inspection procedure. As a part of globalization trend, KS system is also being revised and reestablished based on ISO, IEC, etc. which are based on international standard. Conventional KS sampling inspection standards were in many areas quite different from ISO sampling standards, only KS A 3102, 3104, 3151 are left and the rest become obsolete, and even the ones that are still around are planned to the gone step by step. It has been already 3 years since the new KS A ISO $2859-0\sim3$ sampling inspection process has been established which the abolition of the popular KS A 3101, KS A 3105, KS A 3109, yet the implementation rate is very slow. This study will attempt to analyze the new KS A ISO 2859-2 and KS A ISO 2859-3, and try to understand the difference as that the new standard can be easily understood and used widely among companies, by using examples. Our attempt is to help implement with the companies with active safety involvement but the final result can be spread among other companies as well in the near future.

• 대한원격탐사학회지
• /
• 제38권5_2호
• /
• pp.707-723
• /
• 2022

위성기반 해수면온도는 광역 모니터링이 가능한 장점이 있지만, 다양한 환경적 그리고 기계적 이유로 인한 시공간적 자료공백이 발생한다. 자료공백으로 인한 활용성의 한계가 있으므로, 공백이 없는 자료 생산이 필수적이다. 따라서 본 연구에서는 한반도 주변 해역에 대해 극궤도와 정지궤도 위성에서 생산되는 해수면온도 자료를 두 단계의 기계학습을 통해 융합하여 4 km의 공간해상도를 가지는 일별 해수면온도 합성장을 만들었다. 첫번째 복원 단계에서는 Data INterpolate Convolutional AutoEncoder (DINCAE) 모델을 이용하여 다종 위성기반 해수면온도 자료를 합성하여 복원하였고, 두번째 보정 단계에서는 복원된 해수면온도 자료를 현장관측자료에 맞춰 Light Gradient Boosting Machine (LGBM) 모델로 학습시켜 최종적인 일별 해수면온도 합성장을 만들었다. 개발된 모델의 검증을 위해 복원 단계에서 무작위 50일의 자료 중 일부분을 제거하여 복원한 뒤 제거된 영역에 대해 검증하였으며, 보정 단계에서는 Leave One Year Out Cross Validation (LOYOCV) 기법을 이용하여 현장자료와의 정확도를 검증하였다. DINCAE 모델의 해수면온도 복원 결과는 상당히 높은 정확도(R²=0.98, bias=0.27℃, RMSE=0.97℃, MAE=0.73℃)를 보였다. 두번째 단계의 LGBM 보정 모델의 정확도 개선은 표층 뜰개 부이와 계류형 부이 현장자료와의 비교에서 모두 상당한 향상(RMSE=∆0.21-0.29℃, rRMSE=∆0.91-1.65%, MAE=∆0.17-0.24℃)을 보여주었다. 특히, 모든 현장 자료를 이용한 보정 모델의 표층 뜰개 부이와의 정확도는 동일한 현장 자료가 동화된 기존 해수면온도 합성장보다 나은 정확도를 보였다. 또한 LGBM 보정 모델은 랜덤포레스트(random forest)를 사용한 선행연구에서 보고된 과적합의 문제를 상당부분 해결하였다. 보정된 해수면온도는 기존의 초고해상도 해수면온도 합성장들과 유사한 수준으로 수온 전선과 와동 등의 중규모 해양현상을 뚜렷하게 모의하였다. 본 연구는 다종위성 자료와 기계학습 기법을 사용해 시공간적 공백 없는 고해상도 해수면온도 합성장 제작 방법을 제시하였다는 점에서 가치가 있다.

• 한국대기환경학회지
• /
• 제18권5호
• /
• pp.355-362
• /
• 2002

There has been relatively a few studies that focused on evaluation of uncertainty for standard methods by which criteria pollutants are analyzed in ambient air. Especially, uncertainty evaluation has not been made yet for sampling and analysis of airborne NO$_2$. Ambient NO$_2$ has been thought to be a major criteria pollutant worldwide because of the potential of ozone formation as well as of its own toxicity. In this study, we tried to assess uncertainties associated with the every step of sampling and of analytical procedure of Griess-Saltzman method. Quality assurance (QA) and quality control (QC) were also emphasized with the uncertainty characterization. The use of Griess-Saltzman method for ambient NO$_2$ analysis showed very uniform daily concentration distribution with the mean of 10.8 ppb and the standard deviation of 1.08ppb during the sampling period. However, seven daily samples collected at the same sampling time and place exhibited highly different concentration distribution. Therefore, we evaluated uncertainties associated with sampling and analysis through the precise application of ISO Guide. Estimates of expanded uncertainties for a total of 62 samples fell in a relatively broad range of 5.17% to 11.85%. On the other hand. the expanded uncertainties were smaller for the high concentration range of greater than 15ppb.

• 보건교육건강증진학회지
• /
• 제32권5호
• /
• pp.73-81
• /
• 2015

Objectives: We tried to confirm physical activity of 1,000 Kcal per week was a meaningful point in controlling coronary artery disease risks in female older adults. Methods: Participants were 66 female older adults recruited from senior welfare center. Participants were provided with accelerometer (e-step, Kenz, Japan) for measuring daily energy expenditure. Graded exercise test was done for measuring aerobic fitness. Blood glucose and lipid were analyzed. Framingham risk score was calculated based on blood glucose, blood lipid, and smoking. These variables were compared between the group expended more than 1,000 Kcal/week and the group with energy expenditure below 1,000 Kcal/week. Results: The group expended over 1,000kcal/week showed to be superior to the counterpart group in following variables; AC(Abdominal Circumference), %BF, $HR_{rest}$(resting heart rate), $VO_{2peak}$, FBG, LDL-C, TG, BDI-II, QOL, AR(Absolute Risk), RR(Relative Risk). Conclusions: The group expended over 1,000 Kcal/week was likely to have less probability in CAD than group expended less than 1,000 Kcal/week. The result of this study suggests the important role of active daily life that can be replaced with that of regular exercise especially for those who are not available to do structured exercise.

• 한국농림기상학회지
• /
• 제8권2호
• /
• pp.68-76
• /
• 2006

A thermal time-based two-step phenological model was used to project flowering dates of Japanese cherry in South Korea from 1941 to 2100. The model consists of two sequential periods: the rest period described by chilling requirement and the forcing period described by heating requirement. Daily maximum and minimum temperature are used to calculate daily chill units until a pre-determined chilling requirement for rest release is met. After the projected rest release date, daily heat units (growing degree days) are accumulated until a pre-determined heating requirement for flowering is achieved. Model calculations using daily temperature data at 18 synoptic stations during 1955-2004 were compared with the observed blooming dates and resulted in 3.9 days mean absolute error, 5.1 days root mean squared error, and a correlation coefficient of 0.86. Considering that the phonology observation has never been fully standardized in Korea, this result seems reasonable. Gridded data sets of daily maximum and minimum temperature with a 270 m grid spacing were prepared for the climatological years 1941-1970 and 1971-2000 from observations at 56 synoptic stations by using a spatial interpolation scheme for correcting urban heat island effect as well as elevation effect. A 25km-resolution temperature data set covering the Korean Peninsula, prepared by the Meteorological Research Institute of Korea Meteorological Administration under the condition of Inter-governmental Panel on Climate Change-Special Report on Emission Scenarios A2, was converted to 270 m gridded data for the climatological years 2011-2040, 2041-2070 and 2071-2100. The model was run by the gridded daily maximum and minimum temperature data sets, each representing a climatological normal year for 1941-1970, 1971-2000, 2011-2040, 2041-2070, and 2071-2100. According to the model calculation, the spatially averaged flowering date for the 1971-2000 normal is shorter than that for 1941-1970 by 5.2 days. Compared with the current normal (1971-2000), flowering of Japanese cherry is expected to be earlier by 9, 21, and 29 days in the future normal years 2011-2040, 2041-2070, and 2071-2100, respectively. Southern coastal areas might experience springs with incomplete or even no Japanese cherry flowering caused by insufficient chilling for breaking bud dormancy.