• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2009.04a
• /
• pp.91-94
• /
• 2009

The Aerial photographic mission is working of taking picture at appropriate point at operating aircraft. Specially, because multi-looking camera system for 3D spatial data construction don't use large size CCD camera, do use middle size or small size CCD camera, Exterior parameter can't be calculated because of not enough overlap, if taking picture at inappropriate position. Therefore, we can construct 3D spatial modeling data by taking picture at planned points using GPS Positioning information

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.19 no.1
• /
• pp.9-17
• /
• 2001

GPS is an efficient system in surveying and car navigation. but it is difficult to catch minimum number of satellite when it is hindered by obstacle such as city area. GLONASS system doesn't have perfect constellation yet, but it has many similarities with GPS system in principle of point positioning and signal system. so, it is expected to be much efficient when it is used with GPS system. For the purpose of this, the coordinates of GPS and GLONASS system, the quality of time and frequency was investigated, and the algorithm of point positioning was made. also, the efficiency of GPS/GLONASS combination was presented by analysing the precision of 3D point positioning using C/A code and Yuma satellite orbit information.

• Journal of Positioning, Navigation, and Timing
• /
• v.1 no.1
• /
• pp.59-64
• /
• 2012

Precise Point Positioning (PPP) has been widely used in navigation and orbit determination applications as we can obtain precise Global Positioning System (GPS) satellite orbit and clock products. Kinematic PPP, which is based on the GPS measurements only from the spaceborne GPS receiver, has some advantages for a simple precise orbit determination (POD). In this study, we developed kinematic PPP technique to estimate the orbits of GRACE-A satellite. The comparison of the mean position between the JPL's orbit product and our results showed the orbit differences 0.18 cm, 0.54 cm, and 0.98 cm in the Radial, in Along-track, and Cross-track direction respectively. In addition, we obtained the root mean square (rms) values of 4.06 cm, 3.90 cm, and 3.23 cm in the satellite coordinate components relative to the known coordinates.

• The KIPS Transactions:PartD
• /
• v.17D no.1
• /
• pp.53-58
• /
• 2010

This research aims to develop practical location-based services that provide users with personalized theater guide services on smart phones. In this research, we have designed and implemented a smart theater guide system for Deahakro, Seoul based on smart phones incorporating GPS. This system first identifies the current position using GPS, and maps the current position onto the map. It is designed and implemented to provide users with personalized information service about the plays and the theaters nearby the current position. It is also optimized to be useful effectively by performing on-site experiments.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1152-1154
• /
• 2003

The needs of 3-D data have been increasing for various applications like visualization, 3-D modeling, planning and management as well as entertainment. Mobile mapping has become a quick and practical means for acquiring necessary 3-D data for above-mentioned applications. A mobile mapping system mainly consists of two main components, viz. data acquisition devices and positioning devices. The data acquisition devices consist of CCD cameras or/and laser scanners. The positioning devices consist of GPS, INS, Odometer (shaft encoder) and some other referencing devices. The overall accuracy of mobile mapping system depends on the accuracy of positioning devices and their integrated output. Though, GPS is the main input device for the position information, the signal is not available for the computation of position all the times in urban area. The GPS satellites are normally obstructed by high-rise buildings. Thus it is very important to understand the accuracy of such a system in different environments and means to solve such problems. We have developed a mobile mapping system called VLMS (Vehicle-borne Laser Mapping System), which consists of CCD Cameras, Laser scanners, GPS, INS and Odometer. In this paper, we will present and discuss the accuracy of this system with data acquired in different environments (open area, urban area, tunnel, express way etc) by analyzing the data with respect to other existing digital data.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.12
• /
• pp.1233-1238
• /
• 2003

In this paper, radially corrugated circular-type microstrip patch antenna was devised and manufactured for GPS (center frequency: 1.575 GHz). Radially corrugated circular-type microstrip patch antenna having radiational corrugation-patch contributed to add size reduction ratio by lowering the resonant frequency because the edge current also has the extended and perpendicular path. As a result, radially corrugated circular-type microstrip patch antenna has 28 % area reduction than planer circular-type patch antenna for linear polarization and 27.7 % area reduction than planer circular-type patch antenna for circular polarization. Radially corrugated circular-type microstrip patch antenna is suitable for miniaturized receive antenna for GPS which has the characteristic of gain 2.1 dBd, axiai ratio 1.3 dB, 2 dB axial bandwidth 15 MHz(0.9 %).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.9
• /
• pp.775-782
• /
• 2016

In this paper, we propose a dual-band GPS antenna using a single-layer coupled-feed structure for improvement of isolation and design complexity. The proposed antenna consists of a central feed patch and outer dual loops, and the loops are electromagnetically fed by the feed patch to induce currents. This feeding network can improve the isolation between antenna elements arranged in small arrays because the magnetic field strength near the antenna is minimized by confining the fields around the dual loops. The isolation characteristics of the proposed antenna are compared with those of the conventional multi-layer patch antenna, and the average field strength and the isolation are improved by 3 dB and 2 dB, respectively, which verifies that the antenna is suitable for small CRPA arrays.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.8
• /
• pp.765-768
• /
• 2015

In this paper, two ports feeding a microstrip patch antenna using a quadrature hybrid circuit was proposed to enhance the bandwidth for the global positioning system(GPS). The square patch was designed, and the probe feeding was applied. The quadrature hybrid chip circuit for two-port feeding was designed, and output ports that have a 90-degree phase difference feed to the patch antenna. The designed patch and quadrature hybrid circuit were implemented on an FR4 board, and were combined. The measurement of the bandwidth within a voltage standing wave ratio(VSWR) of 2: 1 and axial ratio(AR) in 3dB were 29 %BW(1,230~1,700 MHz) and 15.87 %BW(1,400~1,650 MHz), respectively. The peak gain at the GPS center frequency was measured at 2.75 dBi in an anechoic chamber.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.155-162
• /
• 2020

In this paper, we present a radiation compensation method and experiment method for two-dimensional direction finding by elevation and azimuth angles of broadband GPS signal, and then produce experimental results. Previous studies have performed direction finding by only using the azimuth angle of the detected signal. So, the compensation table utilizes compensation data by azimuth angles only. However, the presented method in this study has compensation data by azimuth and elevation angles for two-dimensional direction finding. Because of direction finding systems and applications are diversified, recently. So, we present a two-dimensional radiation compensation method. For evaluation of the presented compensation method, we calculate the ideal phase differences on the antenna for two-dimensional direction finding and simulate phase differences using a FEKO EM simulator. Subsequently, we analyze experimental data by radiation compensation experiments using the presented compensation method in an anechoic chamber.

• Journal of the Institute of Convergence Signal Processing
• /
• v.16 no.4
• /
• pp.156-161
• /
• 2015

In this paper, a dual-polarized multi-band multi-layer antenna for a vehicle, which operates in the GPS, bluetooth, and DSRC bands, was implemented. The antenna was designed as a multi-layer structure, and a FR4-epoxy substrate with =4.4 and =1.6mm was used. GPS and DSRC antennas have circular polarized characteristics, and a single probe feeding method was applied. Simulated results by Ansys HFSS v11 was compared with the measured ones. The size of the optimally designed antenna is $67mm{\times}67mm{\times}4.8mm$, -10dB bandwidth of the anatenna was measured to be 820MHz, 127MHz, and 862MHz in each band, and 3dB AR bandwidth of the antenna was simulated to be 19MHz and 110MHz in GPS and DSRC bands. The results confirmed that suggested system satisfies the system requirements.