• 대한치과보철학회지
• /
• 제34권2호
• /
• pp.320-334
• /
• 1996

Dental cast and die materials are essential material using in almost dental prsthodontic procedure and it's most important requirement is accuracy for reqorducing the oral anatomical structures. In this study, 5 abutments A, B, C, D, E were fabricated on the metal master model to simulate the arch form and specimens were poured with 4 cast materials. Inter-abutment distances, A-B, A-C, A-D, A-E, B-C, B-D were calculated using the photo-scanning and the deviations from the metal master model were also evaluated. The results were as follows; 1. The distance between A-B, A-C, A-D, A-E, B-C, B-D of the abutments A, B, C, D, E of each cast material was calculated. And after comparing the deviations between the metal master model. $Fujirock^{(R)}$ showed the lowest value with $0.20{\pm}0.22mm$, and the deviation increased in the order of $Suprastone^{(R)}$, Epoxy $Die^{(R)}$, Die $Keen^{(R)}$. There was significant difference between $Fujirock^{(R)}$ and Epoxy $Die^{(R)}$, Die $Keen^{(R)}$. 2. In each calculation area, the difference in measurements between cast material and metal master model showed singificant difference between A-B and Cross arch measure-ments of A-D, B-D, A-E(p<0.05). 3. The difference in measurements between cast material and metal master model in the A-B area showed $Fujirock^{(R)}$ to be the lowest with $0.05{\pm}0.04$mm and increased in the order of Die $Keen^{(R)}$, $Suprastone^{(R)}$, Epoxy $Dies^{(R)}$. There was significant difference between $Fujirock^{(R)}$ and $Suprastone^{(R)}$, Epoxy $Die^{(R)}$ (p<0.05). 4. The difference in measurements between cast material and metal master model in the B-C area showed $Fujirock^{(R)}$ to bo the lowest with $0.17{\pm}0.11$mm and increased in the order of $Suprastone^{(R)}$, Die $Keen^{(R)}$, Epoxy $Dies^{(R)}$. There was significant difference between $Fujirock^{(R)}$ and Die $Keen^{(R)}$, Epoxy $Die^{(R)}$(p<0.05). 5. The difference in measurements between cast material and metal master model in the B-D area showed $Fujirock^{(R)}$ to bo the lowest with $0.13{\pm}0.07$mm, Epoxy $Dies^{(R)}$and increased in the order of $Suprastone^{(R)}$, Die $Keen^{(R)}$. There was significant difference between $Fuji-rock^{(R)}$ and Die Keen(p<0.05). 6. In this experiment, Epoxy $Dies^{(R)}$ showed mean contraction in every calculation area. And when reconstruction cross arch restorations it is thought that distortion should be considered in every cast material.

• 복식문화연구
• /
• 제20권5호
• /
• pp.621-634
• /
• 2012

With comparative analysis of running-type brassieres on the market about suitability for middle-aged women, this study is to provide basic data of running-type brassieres' pattern which is highly suitable. In the pursuit of this purpose, this study carried out wearing experiment targeting 3 middle-aged women with normal body shape which is 85B of chest circumference. The result is as follows. The significant difference was recognized in the breast. The products were rated in order of C>A>B>D, E, F, G>H by the observers, and C>B>D>A>F>E=G>H by the subjects. The significant difference was recognized in the armhole area. The products were ranked in the order of C, D>B, G, E>A, F, H by the observes and D, C>B>G>F>A>H by the subjects. The significant difference was also recognized in 6 categories(14~19) for the torso. According to the overall average values, the products were rated in the order of B, C, D>A, D, F, G by the observers and B=D>C>H>F>G>A>E by the subjects. The overall evaluation exhibited the significant difference. The products were ranked in the order of D>C>E>B>H>A>G>F by both observers and subjects. Therefore it was confirmed that the product D was appropriate in general. To conclude of comparative analysis about 8 kinds of running-type brassieres on the market, the average values of the product C and D in all categories had high marks for each category. The product C was comfortable and capable of covering the breast well, however, a gap was formed in outside-up part. The product D, made from lacy fabric, was very comfortable and well-fitted but there was inconsistency between the mold-cup and the breast shape.

• 한국산업보건학회지
• /
• 제5권2호
• /
• pp.193-199
• /
• 1995

This study was designed to investigate the difference of time weighted average(TWA) of noise levels and noise doses by the different operating parameter settings such as exchange rate, threshold level and criterion level for noise dosimeter in the field measurements of noise at industrial working environments. The time weighted averages of noise level and noise doses for noise working environments were determined by noise dosimeter on 80 workers employed at 20 industrial establishments of 8 industries. The results obtained were as follows: 1. The mean time weighted average(TWA) of the noise working environments by the operating parameter settings showed 93.4 dB(A) in 3 dB of exchange rate, 80 dB of threshold level and 90dB of criterion level 92.0 dB(A) in 3 dB-exchange rate, 90 dB-threshold level and 90 dB-criterion level, in 90.8 dB(A) in 5 dB of exchange rate, 80 dB of threshold level and 90 dB of criterion level, and 86.7 dB(A) in 5 dB of exchange rate, 90 dB of threshold level and 90dB of criterion level. 2. ln group of noise level less than 90 dB(A), mean TWAs of 80 dB of threshold level were significantly higher than that of 90 dB of threshold level in 3 dB and 5 dB of exchange rate. 3. The case exceeded threshold limit value of noise was 49(61.3 %) in 3dB, 80dB and 90 dB setting, 44(55.0 %) in 3 dB, 90 dB, 90 dB setting, 33(41.3 %) in 5 dB, 80dB, 90 dB setting and 26(32.5%) in 5 dB, 90 dB, 90 dB setting. Above considerations in mind, it is suggested that exchange rate and threshold level be specified in related laws and regulations in the evaluation of working environments noise.

• 한국음향학회지
• /
• 제39권1호
• /
• pp.57-63
• /
• 2020

바이노럴 비트는 양이에 도달한 소리의 주파수 차이로 유발된 주관적인 맥놀이 현상이다. 물리적으로 맥놀이의 세기는 주파수가 다른 두 신호의 크기에 영향을 받는다. 따라서 바이노럴 비트는 좌우 청력의 차이에 따라 영향을 받을 것으로 예상된다. 본 연구에서는 청력에 따른 효과를 평가하기 위해, 정상 청력을 가진 34명의 피실험자가 한 쪽 귀에 기준음[440 Hz, 50 dB Sound Pressure Level(SPL)], 반대 측 귀에 주파수가 다른 제시음(450 Hz)을 SPL을 감소하며 들을 때, 주관적으로 느끼는 바이노럴 비트 의 세기의 변화를 Semantic Differential Method(SDM) 이용하여 평가하도록 했다. 실험 결과 피실험자가 느끼는 바이노럴 비트의 세기는, 좌우 소리의 SPL 차이가 역치(2.2 dB)보다 크면, 좌우 소리의 SPL 차이가 증가함에 따라 지속적으로 유의하게 감소하는 것으로 나타났다. 이러한 결과는 바이노럴 비트 효과를 최대로 하기 위해 좌우 청력 차이를 적절한 범위(예. 2.2 dB) 이내로 유지하는 것이 필요하다는 것을 시사한다.

• 대한기관식도과학회:학술대회논문집
• /
• 대한기관식도과학회 1981년도 제15차 학술대회연제순서 및 초록
• /
• pp.38.2-39
• /
• 1981

어음청취역치는 어음명료도검사를 위한 기초검사이며 순음청력검사의 신뢰도를 검증하는데도 이용된다. 순음청럭검사와 어음청취역치의 연관성을 보기위해 본원에 내원한 전음성난청환자 50이(33명), 정상인 30이(40명)에 대해 Grason-Stadler 1702 Audiometer를 사용하여 순음청력검사와 어음청취역치를 측정하여 다음과 같은 결과를 얻었다. 1) 어음청취역치와 회화음역에서의 순음평균치의 차이는 전음성난청의 경우 그 범위가 -3,3dB∼+8.3dB로 평근 2.4dB의 격차를 보였고 정상인의 경우 그 범위가 -6.7dB∼+5dB로 평균 1.9dB의 격차를 보였다. 2) 회화음역의 500Hz, 1,000Hz, 2,000Hz 각 주파수에서의 역치와 어음청취역치간의 차이는 전음성난청의 경우 500Hz에서 평균 6dB, 1,000Hz에서 평균 3dB, 2,000Hz에서 평균8.8dB였으며 정상인의 경우 500Hz에사 평균 3dB, 1,000Hz에서 평균 2dB, 2,000Hz에서 평균 5dB로서 전음성난청과 정상인에서 다같이 1,000Hz에서 어음청취역치와 순음역치의 차이가 가장 적었다.

• Journal of information and communication convergence engineering
• /
• 제11권3호
• /
• pp.147-152
• /
• 2013

A novel balun being the structure of a Wilkinson power divider is suggested and fabricated. One of the power dividing paths in the suggested balun uses a conventional ${\lambda}/4$ transmission line for $-90^{\circ}$ phase shifting, and the other path uses a composite right/left-handed -${\lambda}/4$ transmission line for $+90^{\circ}$ phase shifting with four series capacitors and three parallel inductors. In addition, the suggested balun uses two $50-{\Omega}$ resistors and a conventional $50-{\Omega}$ transmission line of ${\lambda}/2$ electrical length between the two output ports, achieving good isolation and reflection values of two balanced ports. The suggested balun is simulated by the advanced design system simulation program and fabricated on TLX-9 20-mil substrate. The fabricated balun has a very good values of $S_{11}$ = -27.46 dB, $S_{21}$ = -3.40 dB, and $S_{31}$ = -3.28 dB, a phase difference of $-179.5^{\circ}$, a magnitude difference of 0.12 dB, and a delay difference of 0.1 ns, with $S_{22}$ = -36.28 dB, $S_{33}$ = -27.19 dB, and $S_{32}$ = -25.2 dB at 1 GHz, respectively.

• 대한임상검사과학회지
• /
• 제38권3호
• /
• pp.224-230
• /
• 2006

Up to now, there have been rare clinical studies on leaders and aerobics athletes. To get the useful data for protecting from auditory disorder, we selected 15 female aerobics leaders (experimental group) and 15 females (control group) unexperienced in aerobics and a without neurological and octolaryngological disorder. The average age was $34.87{\pm}8.80$ (experimental group) and $34.07{\pm}8.45$ (control group) years, and the average career of an aerobics leader (experimental group) was $8.33{\pm}4.73$ years. We measured the auditory evoked potential (AEP) of the two groups treated with 70, 75 and 85 dB intensity from January 2006 to May 2006 and analyzed the absolute latency (AL) and interpeak latency (IPL) by the SPSS/pc+ 12.0 program. In the comparison of the AL between the experimental group and the control group according to intensity, both ears treated with 70 and 75 dB had a significant difference (p<0.05) in the I, III, V wave and in the I, V wave respectively, and the experimental group treated with 85 dB showed a difference in the I, III, V wave (left ear) and in the I wave (right ear) respectively. The IPL of the two groups treated with various intensities had no prolongation. In the comparison of the AL between the experimental group and the control group according to ages, the experimental group in their 20s treated with 70 dB showed a significant difference (p<0.05) in the V wave (left ear) and in the I, III, V wave (right ear), and the experimental group in their 20s treated with 75 dB in the I, III wave (left ear) and in I, III, V wave (right ear), and experimental group in their 20s treated with 85 dB in the V wave (left ear) and in the III, V wave (right ear). The experimental group in their 30s treated with 70 dB had a significant difference (p<0.05) only in the V wave (right ear). Only in the IPL of subjects in their 20s treated with 85 dB, III-V and I-V of both ears was extended. In the comparison of the AL and IPL according to career, there was no significant difference between the two groups. From this results, we concluded that the lower sound intensity (70 dB) showed a more significant difference in the experimental group than the control group. We concluded that the leader of aerobics exposed to louder sounds than normal people are affected by auditory neurological and octolaryngological disorders. So we think that the leaders of aerobics need to control the noise level for protecting themselves against a disease.

• 한국항행학회논문지
• /
• 제13권3호
• /
• pp.406-411
• /
• 2009

본 논문에서는 GSM(Global System for Mobile communication) 방식의 이동전화기에서 TDMA 잡음을 분석하기 위하여 잡음 대책 방법에 대하여 알아보고, 또한 잡음의 발생 원인에 대하여 기술한다. 또한 잡음 대책 방법 중 차이분석법을 이용하여 MIC를 shielding하고, 비드나 캐퍼시턴스를 장착하고, PCB의 Ground 보강으로 TDMA 잡음을 9dB, 3.5dB, 6dB 감소시켰다.

• 전기학회논문지
• /
• 제59권1호
• /
• pp.116-119
• /
• 2010

In this work, we presented the characterization of 3 dB branch type directional couplers by using High-Tc superconducting thin films. To do this, we deposited YBCO superconducting thin films on MgO substrates by using rf-magnetron sputtering techniques. The designed center frequency was 408 MHz and the designed passband was 20 MHz. Also we designed 3 dB Power difference and $90^{\circ}$ of phase difference between port 3 and port 4. The even and odd mode analysis were used to characterize our directional couplers and em Sonnet (full wave analysis program) was utilized to the optimum design. We reported experimental results, including a center frequency, passband, half power characteristics and phase differences. We confirmed that experimental results were in good agreements with characterization by using full wave analysis program.

• 대한수학회논문집
• /
• 제32권4호
• /
• pp.959-970
• /
• 2017

In this paper, we investigate the transcendental meromorphic solutions with finite order of two different types of difference equations $${\sum\limits_{j=1}^{n}}a_jf(z+c_j)={\frac{P(z,f)}{Q(z,f)}}={\frac{{\sum_{k=0}^{p}}b_kf^k}{{\sum_{l=0}^{q}}d_lf^l}}$$ and $${\prod\limits_{j=1}^{n}}f(z+c_j)={\frac{P(z,f)}{Q(z,f)}={\frac{{\sum_{k=0}^{p}}b_kf^k}{{\sum_{l=0}^{q}}d_lf^l}}$$ that share three distinct values with another meromorphic function. Here $a_j$, $b_k$, $d_l$ are small functions of f and $a_j{\not{\equiv}}(j=1,2,{\ldots},n)$, $b_p{\not{\equiv}}0$, $d_q{\not{\equiv}}0$. $c_j{\neq}0$ are pairwise distinct constants. p, q, n are non-negative integers. P(z, f) and Q(z, f) are two mutually prime polynomials in f.