• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.7
• /
• pp.1687-1693
• /
• 2015

Recently, demand for digital image processing devices increases rapidly, more clear images have been required. But, in the process of digital image acquisition, processing and transmission, image degradation occurs due to various external reasons and researches about noise reduction are on the rise. Therefore, this study suggested the algorithm to process AWGN(additive white Gaussian noise) by separately processing as three levels according to the pixel distribution in the mask in order to remove AWGN(additive white Gaussian noise) which is added in the image. Regarding the processed results by applying Barbara images which were damaged by AWGN(σ = 15), suggested algorithm showed the improvement by 2.87[dB], 2.95[dB], 2.88[dB], 1.52[dB], 1.49[dB], 1.58[dB] and 1.25[dB] respectively compared with the existing MF(5 × 5), A-TMF(5 × 5), AWMF(5 × 5), MF(3 × 3), A-TMF(3 × 3), AWMF(3 × 3), GF(5 × 5).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.3
• /
• pp.358-365
• /
• 2008

A differential-gain-controlled LNA is designed and implemented in 0.18 um CMOS technology for $3.1{\sim}4.8GHz$ UWB system. In high gain mode, measurements show a differential power gain of $14.1{\sim}15.8dB,\;13.3{\sim}15dB$, respectably, an input return loss higher then 10dB, an input IP3 of -19.3 dBm, a noise figure of $4.85{\sim}5.09dB$, while consuming only 19.8 mW of power from a 1.8V DC supply. In low gain mode, measurements show a differential power gain of $-6.1{\sim}-4.2dB,\;-7.6{\sim}-5.6dB$, respectably, an input return loss higher then 10dB, an input IP3 of -1.45 dBm, a noise figure of $8.8{\sim}10.3dB$, while consuming only 5.4mW of power from a 1.8V DC supply.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.5
• /
• pp.109-114
• /
• 2023

In this paper, a 2-channel Image-Reject receiver using a 65-nm CMOS process is presented for Ka-band compact radars. The designed receiver consists of Low-Noise Amplifier (LNA), IQ mixer, and Analog Baseband (ABB). ABB includes a complex filter in order to suppress unwanted images, and the variable gain amplifiers (VGAs) in RF block and ABB have gain tuning range from 4.5-56 dB for wide dynamic range. The gain of the receiver is controlled by on-chip SPI controllers. The receiver has noise figure of <15 dB, OP1dB of >4 dBm, image rejection ratio of >30 dB, and channel isolation of >45 dB at the voltage gain of 36 dB, in the Ka-band target frequency. The receiver consumes 420 mA at 1.2 V supply with die area of 4000×1600 ㎛.

• Journal of Life Science
• /
• v.15 no.6 s.73
• /
• pp.972-978
• /
• 2005

The present study was carried out to investigate the blood markers of Jeju horses. The redcell cypes (blood groups) and blood protein types (biochemical polymorphisms) were tested from 102 Jeju horses by serological and electrophoretc procedure, and their phenotypes and gene frequencies were estimated. The blood group and biochemical polymorphism phenotypes observed with high frequency were $A^{af}\;(27.45\%$), $C^{a}\;(99.02\%$), $K^{-}\;(97.06\%$), $U^{a}\;(62.75\%$), $P^{b}\;(36.27\%$), $Q^{c}\;(47.06\%$), $D^{cgm/dghm}\;(13.73\%$), $D^{adn/cgm}\;(9.80\%$), $D^{ad/cgm}$\;(8.82\%$), $D^{dghm/dghm}(7.84\%$), $D^{cgm/cgm}(7.84\%$), $AL^{B}\;(48.04\%$), $GC^{F}\;(99.02\%$), $AlB^{K}\;(97.06\%$), $ES^{FI}\;(36.27\%$), $TF^{F2}\;(25.49\%$), $HB^{B1}\;(45.10\%$), and $PGD^{F}\;(86.27\%$) in Jeju horses, respectively. Alleles observed with high gene frequency were $A^{af}$ (0.3726), $A^{C}$ (0.2647), $C^{-}$ (0.5050), $K^{-}$ (0.9853), $U^{-}$ (0.6863), $P^{b}$ (0.4657), $Q^{c}$ (0.5294), $D^{cgm}$ (0.3039), $HB^{B1}$(0.6863), $PGD^{F}$ (0.9265), $AL^{B}$ (0.6912), $ALB^{K}$ (0.9852), $GC^{F}$ (0.9950), $ES^{I}$ (0.5000) and $TF^{F2}$ (0.4950) in Jeju horses, and sfecific alleles, $D^{cgm(f)}$ (0.0196), $HB^{A}$ (0.0147), $HB^{A2}$ (0.0196), $ES^{G}$ (0.0441), $ES^{H}$ (0.0098), $TF^{E}$TF'(0.0246), $TF^{H2}$ (0.0049) and $PGD^{D}$ (0.0098) were detected in Jeju horses. These preliminary results present basic information for detecting the genetic markers in Jeju horse. and developing a system for parentage verification and individuals identification in jeju horses.

• ETRI Journal
• /
• v.40 no.5
• /
• pp.561-569
• /
• 2018

Modern communication systems employ wideband antennas with circular polarization (CP) radiation. In this work, asymmetric modified bow-tie (ABT) and symmetric modified bow-tie (SBT) slotted circularly polarized single-point probe-fed circular patch antennas with dimensions of $40mm{\times}40mm$ for wideband applications are proposed. A 10 dB RL bandwidth of 350 MHz with CP, 3 dB axial ratio (AR) bandwidth of 100 MHz, peak gain of 4.9 dBic, and 10 dB RL bandwidth of 530 MHz with CP, 3 dB AR bandwidth of 140 MHz, peak gain of 5 dBic are obtained for ABT and SBT slotted circular patch antennas, respectively. The proposed SBT slotted patch is scaled up and down to $50mm{\times}50mm$ and $30mm{\times}30mm$, respectively. The proposed scaled-up version offers 10 dB RL and 3 dB AR bandwidths of 340 MHz and 80 MHz, with a peak gain of 5 dBic. The scaled-down version offers 10 dB RL and 3 dB AR bandwidths of 710 MHz and 180 MHz, with a peak gain of 5.25 dBic. These prototypes are suitable to work in IEEE 802.11a WLAN, ISM, and IEEE 802.11ac applications. The measured and simulated results are then discussed and compared.

• Korean Journal of Optics and Photonics
• /
• v.5 no.2
• /
• pp.311-318
• /
• 1994

We fabricated fiber-optic polarizers utilizing polarization selective mode coupling between the guided mode of a fiber and the surface plasmon mode supported by a thin aluminium film deposited on the polished side of a fiber. AI thin films with various thicknesses were coated onto the 633 nm, 830 nm, 1.3 fJITI single mode fibers. The maximum extinction ratio was higher than 30 dB for most of the samples and the best result was 42 dB at 90 A film thickness, with 1.3 fJITI single mode fiber. The insertion loss ranged from 0.2 dB to 1.5 dB.1.5 dB.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.278-280
• /
• 2007

This survey was carried out to provide a sound and a vibration level of bridges on the Han river. A sound and a vibration level of 6 bridges(Ban po, Cheon ho, Olympic, Jam soo, Young dong, Dong ho) were measured. The X-axis vibration level($L_{10}$) was $42{\sim}60$ dB(H), Y-axis vibration level was $41{\sim}52$ dB(H) and Z-axis vibration level was $44{\sim}77$ dB(V). The Z-axis vibration level($L_{10}$) on the midpoint of bridges was 68 dB(V), and on the joint point was 56 dB(V). The sound level was $77{\sim}84$ dB(A). The sound level of Jam soo bridge was higher than any other bridges.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.3
• /
• pp.249-259
• /
• 2009

Puroindoline alleles, grain characteristics, milling performances and physical properties of flour of 22 Korean wheat cultivars were evaluated to determine the influence of puroindolines genotypes on grain and flour characteristics and to provide useful information for improving milling and end-use quality in Korean wheat breeding programs. Nine Korean wheat cultivars carried with Pina-D1a/Pinb-D1a, 11 cultivars had Pina-D1a/Pinb-D1b and 2 cultivars were Pina-D1b/Pinb-D1a. Korean wheats carrying with Pina-D1a/Pinb-D1a genotypes showed lower test weight and thousand kernel weight, area and roundness of grain and hardness index in grain characteristics, lower flour yield and higher proportion of break flour in milling performances and lower average particle size of flour, ash and damaged starch content, water retention capacity, yellowness-blueness and higher lightness of flour than wheats with Pina-D1a/Pinb-D1b or Pina-D1b/Pina-D1a genotypes. Pina-D1a/Pinb-D1b genotypes showed lower 1000-kernel weight, grain area, higher average of particle size of flour, higher ash and damaged starch content than Pina-D1b/Pina-D1a genotypes. There was no difference in hardness index of grain, milling performances, flour color between Pina-D1a/Pinb-D1b and Pina-D1b/Pina-D1a genotypes. These results could present the information to improve milling quality and physical properties of flour in Korean wheat breeding programs.

• Journal of electromagnetic engineering and science
• /
• v.11 no.1
• /
• pp.16-26
• /
• 2011

This paper presents high power and high efficiency Doherty amplifiers for 2.345 GHz wireless broadband (WiBro) applications that use a Nitronex 125-W ($P_{3dB}$) GaN high electron mobility transistor (HEMT). Two- and three-way Doherty amplifiers and a saturated Doherty amplifier using Class-F circuitry are implemented. The measured result for a center frequency of 2.345 GHz shows that the two-way Doherty amplifier attains a high $P_{3dB}$ of 51.5 dBm, a gain of 12.5 dB, and a power-added efficiency (PAE) improvement of about 16 % compared to a single class AB amplifier at 6-dB back-off power region from $P_{3dB}$. For a WiBro OFDMA signal, the Doherty amplifier provides an adjacent channel leakage ratio (ACLR) at 4.77 MHz offset that is -33 dBc at an output power of 42 dBm, which is a 9.5 dB back-off power region from $P_{3dB}$. By employing a digital pre-distortion (DPD) technique, the ACLR of the Doherty amplifier is improved from -33 dBc to -48 dBc. The measured result for the same frequency shows that the three-way Doherty amplifier, which has a $P_{3dB}$ of 53.16 dBm and a gain of 10.3 dB, and the saturated Doherty amplifier, which has a $P_{3dB}$ of 51.1 dBm and a gain of 10.3 dB, provide a PAE improvement of 11 % at the 9-dB back-off power region and 7.5 % at the 6-dB back-off region, respectively, compared to the two-way Doherty amplifier.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.5
• /
• pp.748-754
• /
• 2000

A novel single feed wide band CP stacked microstrip antenna using crossed slots has been designed, fabricated and measured. For the single rediating element the designed 10dB return loss bandwidth is 34.5%99.45~13.54 GHz), 3dB axial ratio bandwidth is 18.7%(11.17~13.39GHz), and 6 dB gain bandwidth is 29%(10.21~13.64GHz). For the 2$\times$2 array designed using a sequential rotation method, the 10dB return loss bandwidth is 35.9%(9.69~13.94GHz), 3dB axial ratio bandwidth is 34.6GHz (9.93~14.03GHz), and 6dB gain bandwidth is 27.4%(10.35~13.6GHz). For the fabricated 8$\times$8 array antenna, the 10dB return loss bandwidth is 27.3%(10.17~13.41GHz), 3dB axial ratio bandwidth is 27.9GHz(10.1~13.4GHz), and the radiation pattern is good agreement with theory. This antenna can be used for broadband applications for communications or broadcasting in Ku band.