• Journal of the Korean Geotechnical Society
• /
• v.23 no.7
• /
• pp.87-98
• /
• 2007

A series of dilatometer test, field vane test, and $CK_0U$ triaxial test were performed for clayey soils of Busan new port site to develop the relationships between undrained shear strength and the DMT results. Normalized undrained shear strength is turned out to be $S_{u(CKU)}/{\sigma}'_v=0.30{\sim}0.35\;for\;CK_0U$ triaxial test and ${\mu}S_{u(VST)}/{\sigma}'_v=0.20{\sim}0.22$ for vane shear test. By comparing the undrained shear strength estimated from DMT indices with the results measured by in-situ vane test or $CK_0U$ triaxial test, two methods to predict the undrained shear strength from DMT results are suggested. One is based on the relationship between $S_u/{\sigma}'_v$ and horizontal stress index (KD) while another method comes from $N_c-I_D$ and $N_c-E_D$ correlation. It was observed that the method based on $N_c-I_D\;or\;N_c-E_D$ relation shows slightly better accuracy than the one based on $K_D$ although all of the methods suggested in this study provided comparable values of predicted undrained shear strength. Since the definitions of $I_D\;and\;E_D$ contain $p_1-p_0$, in which soil condition is reflected, it is believed that the prediction method using $N_c$ is capable of taking a material type into consideration.

• Journal of Ceramic Processing Research
• /
• v.19 no.6
• /
• pp.519-524
• /
• 2018

Carbon/carbon composites (C/C) have been widely studied in the aerospace field because of their excellent thermal shock resistance and specific strength at high temperature. However, they have the problems that is easily oxidized and deteriorated under atmospheric environment. In order to overcome these shortcomings, the CVD coating of ultra-high-temperature ceramics to C/C has become an important technical issue. In this study, thermodynamic calculations were performed to TaC CVD coating on C/C by FactSage 6.2 program. The Ta-C phase diagrams were constructed with the results of thermodynamic calculations in the Ta-C-H-Cl system. Based on the Ta-C phase diagram, the experimental conditions were designed to confirm the deposition of various phases such as TaC single phase, TaC + C and $TaC+Ta_2C$ by varying the composition of Ta/C ratio. The deposited films were found to be in good agreement with the predicted phases.

• Proceedings of the KIEE Conference
• /
• 1988.11a
• /
• pp.155-158
• /
• 1988

The fabrication of devices using plans technology could lend to n serious degradation in the breakdown voltage as a result of high electric field at the edges. An elegant approach to reducing the electric field at the edge is by using field limiting ring. The presence of surface charge has n strong influrence on the depletion layer spreading at the surface region because this charge complements the charge due to the ionized acceptors inside the depletion layer. Surface charge of either polarity can lower the breakdown voltage because it affects the distribution of electric field st the edges. In this paper we discuss the influrences of fixed oxide charge on the breakdown voltage of the p+/n junction with field limiting ring(or without field limiting ring).

• 전기의세계
• /
• v.29 no.2
• /
• pp.129-132
• /
• 1980

For large gas-insulated systems, the conductor utilized possess some degree of surface roughness which locally enhances the applied field at highpressure in $SF_{6}$. In order to investigate the effect of field enhancement on the breakdown field strength, the spheric protrusion was employed which gives a quantitative analysis on field enhancement. For further investigations on the breakdown level and polarity effect in $SF_{6}$, the repeated breakdown tests were performed with d.c. voltage at pressures up to about 4 bar. The experimental results show that the breakdown level does vary noticeably due to successive voltage applications and the breakdown field strength measured for a test gap with the cathode protrusion is markedly lower than that determined from the identical anode protrusion.

• Proceedings of the KIEE Conference
• /
• 1991.11a
• /
• pp.321-324
• /
• 1991

In this study, $(Sr{\cdot}Pb)TiO_3$ series ceramics which is used in high voltage were fabricated by the mixed oxide method, and the electrical conduction mechanism and D.C. breakdown voltage characteristics of the specimens in accordance with the contents of $Bi_2O_3{\cdot}3TiO_2$ were investigated. As a result, the leakage current was increased with the contents of $Bi_2O_3{\cdot}3TiO_2$ and the measuring temperature. At room temperature, the leakeage current was showed a tendency of saturating when D.C. electrical field of $l5{\sim}30$[kV/cm] was applied to the specimen. As a result of breakdown voltage characteristics. breakdown strength was decreased when the contents of $Bi_2O_3{\cdot}3TiO_2$ were increased. On the other hand, in the temperature region below $60[^{\circ}C]$, the electronic breakdown was occured, and in the temperature region from 60 to $200[^{\circ}C]$, the thermal breakdown was occured by the Joule heat and the dissipation factor.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.93-93
• /
• 2000

수소화된 비정질 탄소(a-C:H)는 그 증착 조건에 따라서 여러 가지 다른 구조와 특성을 갖게 되며, 특히 DLC(diamond-like carbon) 및 CNT(Carbon nanotube)는 FED (field emission display) 개발 면에서 중요하게 연구되고 있다. 우리는 a-C:H 박막을 PECVD (plasma-enhanced chemical vapor deposition) 방법으로 증착하고 CH4 가스를 사용하였고 기판 온도는 상온-32$0^{\circ}C$ 사이에서 변화되었다. 기판은 Corning 1737 glass, quartz, Si, Ni 등을 사용하였다. 증착 압력과 R.F. power는 각각 0.1-1 Torr 와 12-60w 사이에서 변화되었다. ESR 측정은 X-band(주파수 약 9 GHz)에서 그리고 상온에서 행해졌다. 상온에서의 스핀밀도는 약한-표준피치(weak-pitch standard) 스펙트럼과 비교하여 얻을 수 있었다. 그리고 a-C:H 박막의 구조는 He-Ne laser(파장 632.8 nm)를 이용하는 micro-Raman spectroscopy로 분석하였다. 증착조건에 따른 스핀밀도의 변화 및 Raman 스펙트럼에서의 D-peak, G-peak의 위치 및 반치록, I(D)/I(G) 등을 조사하였다. 증착된 a-C:H 박막은 R.F.power가 증가할수록 대체로 스핀밀도가 증가하였으며, Raman 스펙트럼에서의 I(D)/I(G) 비율은 대체로 감소하였다. 증착된 박막들은 polymer-like Carbon으로 추정되었으며, 스핀밀도가 증가할수록 대체적으로 흑연 구조 영역이 증가됨을 알 수 있었다. 또한 glass나 Si 기판에 비해 Ni 기판위에서 polymer-like Carbon 구조는 향상되는 경향을 보였다.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.11
• /
• pp.538-543
• /
• 2006

A high-Power continuous-wave (CW) ten-vane double-strapped magnetron oscillator has been investigated using three-dimensional (3D) particle-in-cell (PIC) numerical simulation code, MAGIC3D. The resonant modes and their resonant frequencies of the ten-vane strapped magnetron resonator were obtained to show a large mode separation near the ${\pi}$-mode. An electron cloud formed in an anode-cathode gap, called an interaction space was confined well enough to result in no leakage current. Five spokes were clearly observed in the electron cloud, which definitely ensured the ${\pi}$-mode oscillation in the ten-vane magnetron. Numerical simulations predicted that the saturated microwave output power measured at the coaxial output port was 5.41 kW at the microwave frequency of 893 MHz, corresponding to a power conversion efficiency of 72.6% when the external axial magnetic field was 1150 gauss and the electron beam voltage and current were 6 kV and 1.25 A, respectively.

• Journal of Integrative Natural Science
• /
• v.4 no.3
• /
• pp.216-221
• /
• 2011

c-Jun N-terminal kinase-3 (JNK-3) has been shown to mediate neuronal apoptosis and make the promising therapeutic target for neurodegenerative diseases such as Parkinson's disease, Alzheimer's disease, and other CNS disorders. In order to better understand the structural and chemical features of JNK-3, comparative molecular field analysis (CoMFA) was performed on a series of 3,5-disubstituted quinolines derivatives. The best predictions were obtained CoMFA model ($q^2$=0.707, $r^2$=0.972) and the statistical parameters from the generated 3D-QSAR models were indicated that the data are well fitted and have high predictive ability. The resulting contour map from 3D-QSAR models might be helpful to design novel and more potent JNK3 derivatives.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.8
• /
• pp.443-446
• /
• 2004

In this paper, a multi-band ceramic chip antenna for WLAN(Wireless LAN) applications is designed. The design target is to obtain 0 dBi of coverage gain with omni directional radiation pattern. The antenna is fabricated using Low Temperature Co-fired Ceramic(LTCC) technology. The size of the chip antenna is $2.2{\times}9.65{\times}1.02$mm. The measured antenna gain is 1 dBi at 2.44 GHz and 0.5 dBi at 5.5 GHz. The omni directional radiation pattern for the two operating bands is obtained. The measured bandwidth(S11=-10 dB) are 90 MHz at 2.44 GHz and 1280 MHz at 5.5 GHz respectively

• Korean journal of applied entomology
• /
• v.29 no.4
• /
• pp.277-285
• /
• 1990

Laboratory and field studies were conducted to investigate the initiation and termination factors for pupal diapause in the Oriental tabacco budworm, Heliothis assulta Guenee. Diapause induction was dependent of photoperiod and temperature experienced by 4th and 5th instar larve. One hundred percent of pupal diapause was obtained when larvae were grown at 10L/14D or shorter and $20^{\circ}C$. But at $25^{\circ}C$ the maximum rate of diapause was only about 85% at 8L/16D, the shortest photoperiod tested in this experiment. Adults, eggs or pupae did not respond to diapause-inducing environmental conditions. The critical photoperiod was 12-12.5 hr at $25^{\circ}C$and 14-14.5 hr at $20^{\circ}C$. In the field-collected sample 100% of diapuse rate was observed on Sept. 20 and thereafter in Suwon and middle part of Korea. Cold temperature treatment was not necessary in the termination of pupal diapause, but accelerated adult development.