• Information Systems Review
• /
• v.11 no.1
• /
• pp.107-132
• /
• 2009

The purpose of this research is to define the consulting competence of IT consultants and empirically analyze the perceptual differences between the IT consultant group and the client group. Based on the previous researches and the opinion of the actual IT consultants, the consulting capability model has been established, which consists of six categories and eighteen factors. Six categories are (1) IT domain expertise, (2) problem solving ability, (3) project management capability, (4) communication skills, (5) human relations skills, and (6) professional ethics and attitude. Two field surveys have been performed and the responses of 174 IT consultants 116 clients have been acquired. It is shown that the level of possessed proficiency of IT consulting capability is far lower than the level of the required proficiency. And there exist the perceptual difference between two responding groups with respect to the level required proficiency but no difference exists in terms of the level of possessed proficiency. The findings of this research can provide some useful information in order to fully understand the differences between the IT consultant group and the client group.

• Journal of Microbiology and Biotechnology
• /
• v.30 no.5
• /
• pp.668-680
• /
• 2020

Bacillus velezensis is an important plant growth-promoting rhizobacterium with immense potential in agriculture development. In the present study, Bacillus velezensis Lle-9 was isolated from the bulbs of Lilium leucanthum. The isolated strain showed antifungal activities against plant pathogens like Botryosphaeria dothidea, Fusarium oxysporum, Botrytis cinerea and Fusarium fujikuroi. The highest percentage of growth inhibition i.e., 68.56±2.35% was observed against Fusarium oxysporum followed by 63.12 ± 2.83%, 61.67 ± 3.39% and 55.82 ± 2.76% against Botrytis cinerea, Botryosphaeria dothidea, and Fusarium fujikuroi, respectively. The ethyl acetate fraction revealed a number of bioactive compounds and several were identified as antimicrobial agents such as diketopiperazines, cyclo-peptides, linear peptides, latrunculin A, 5α-hydroxy-6-ketocholesterol, (R)-S-lactoylglutathione, triamterene, rubiadin, moxifloxacin, 9-hydroxy-5Z,7E,11Z,14Z-eicosatetraenoic acid, D-erythro-C18-Sphingosine, citrinin, and 2-arachidonoyllysophosphatidylcholine. The presence of these antimicrobial compounds in the bacterial culture might have contributed to the antifungal activities of the isolated B. velezensis Lle-9. The strain showed plant growth-promoting traits such as production of organic acids, ACC deaminase, indole-3-acetic acid (IAA), siderophores, and nitrogen fixation and phosphate solubilization. IAA production was accelerated with application of exogenous tryptophan concentrations in the medium. Further, the lily plants upon inoculation with Lle-9 exhibited improved vegetative growth, more flowering shoots and longer roots than control plants under greenhouse condition. The isolated B. velezensis strain Lle-9 possessed broad-spectrum antifungal activities and multiple plant growth-promoting traits and thus may play an important role in promoting sustainable agriculture. This strain could be developed and applied in field experiments in order to promote plant growth and control disease pathogens.

• Journal of Preventive Medicine and Public Health
• /
• v.26 no.1 s.41
• /
• pp.20-36
• /
• 1993

Work-related low back pain is one of the major factors that cause the loss of working power especially in actively working age, therefore controlling the work-related low back pain is one of the major issues in the field of industrial safety and health. This study was performed for detecting the risk factors and proposing the efficient control program of the work-related low back pain. The subjects were male workers employed at the manufacturing industry in Pusan with longer than 6 months' working duration. The data was collected by self-reported questionnaire and interview from May 1 to October 31,1992. The contents of questionnaire were as follows:. the experience of low back pain within the recent one month, general characteristics(age, marital status, education level, religion, regular exercise), physical characteristics(height, weight), employment status(working duration, daily working hours, rest during work, satis(action fur the job), type of work and working environments(posture, forward bending, lifting and movement, satisfaction for table and chair). The result was analyzed for 608 entire respondents by case-control comparative method. The number of cases was 152 with a history of work-related low back pain, so the relative frequency of self-reported work-related low back pain was 25.0%, and the number of controls was 344 without any history of low back pain. As a result, two characteristics of the employment status(working duration, satisfaction fur the job) and all characteristics of type of work and working environments showed a statistical significance between the case and control groups(p<0.01). The Oddb ratios of these variables for Work-related low back pain were calculated. They were 7.88 for the satisfaction fur chair, 7.86 for lifting and movement,3.31 for satisfaction for table, and 2.22 fur bending forward(p<0.01). And for the multivariate logistic regression analysis confirmed that unsatisfaction for table was independent risk factor for Work-related low back pain. In summary, though this study was based upon the self-reported questionnaire and the subjective complaints, the satisfaction for chair, lifting and movement, satisfaction for table, and bending forward concerned with the type of work and working environments were considered as the main factors causing the work-related low back pain, and the work-related low back pain may be preventable by the ergonomic control of these factors.

• Journal of Plant Biology
• /
• v.2 no.1
• /
• pp.14-21
• /
• 1959

The bamboo, one of staples of South-East Asia, has 1, 250 species in 46 Genus throughout the world South-East Asia, it's main habitat, has 1, 180 species, while South America has about 70 species or so. Major places of it's production in Asia are Korea, southern China, Japan, Malay, Ceylon, Formosa, and Philipine, but of these, Korea, southern China, and Japan are the most famous places for their production of excellant bamboo. In Korea, Kyongsang-Namdo and Cholla-Namdo are known as it's home, occupying 80 per cent of the total area of bamboo production in this country. Kyongsang-Pukdo, Cholla-Pukdo, Chungehong-Namdo, and Kangwon-do are also known as it's minor production. The importance of the bamboo can not be ignored, considering it's role in the industrial development of this country; the bamboo-ware is indispensable for the culture of laver which annually secures a considerable amount of foreign money. But it has long been regreted that the home-made bamboo-ware is far from being able to meet the ever increasing demand in quantity and is forced to be imported annually. In the light of the above mentioned fact, much interested; I undertook the task of investigating the bamboo in this country, Primarily concerned in it's kind and distribution, and could draw the following conclusions as the first phase of my investigation: (1). The amount of the bamboo accumulation in this country, compared with that of pre-worldwar II, is reduced as much as 300, 000 fagots(on fagot amounts to 25 pieces), and now the acreage of the bamboo field is 32, 200$\textrm{km}^2$s. (2). At a mountian peak in Kunoe-myon Wando-kun Cholla-Namdo, I found out a new specis. (Shasamorpha chiisanensis NAKAI Forma wan-Ponia H. P. CHONG) (3). The kinds of the autogenous wild bamboo in this country are as follows; a). 8 kinds in Sinoarundinaria. (5 Spp; 2 For; 1 Var) b). 1 kinds in Pieioplastus. (1 Spp) c). 2 kinds in Pseudosasa. (1 Spp; 1Var.) d) 4 kinds in Sasamorpha. (2 Spp; 1 For.; 1 Var.) e). 4 kinds in Sasa. (4 Spp) In total there are nineteen(19) kinds of autogenous wild bamboo in this country. When adding to this thethirty five (35) species which the japanese has transplanted in Kyongsang-Namdo Forestry Expreimental stations, there are in all fifty four (54) spe ies in this country. (4). As for the distribution of the Northern limitation of the bamboo growing, I found that Sinoarundinaria nigra OHWI var, Henonis HONDA can be cultivated as for as Kosongkun, Kangwon-Do, andSinoarundinaria pubescens HONDA as for as Clung Chong Namdo, and Sinoarundinaria reticulata as far as chung Chong-Pukdo.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.42.3-43
• /
• 2009

Triplets of identical cubesats will be built to carry out the following scientific objectives: i) multi-observations of ionospheric ENA (Energetic Neutral Atom) imaging, ii) ionospheric signature of suprathermal electrons and ions associated with auroral acceleration as well as electron microbursts, and iii) complementary measurements of magnetic fields for particle data. Each satellite, a cubesat for ion, neutral, electron, and magnetic fields (CINEMA), is equipped with a suprathermal electron, ion, neutral (STEIN) instrument and a 3-axis magnetometer of magnetoresistive sensors. TRIO is developed by three institutes: i) two CINEMA by Kyung Hee University (KHU) under the WCU program, ii) one CINEMA by UC Berkeley under the NSF support, and iii) three magnetometers by Imperial College, respectively. Multi-spacecraft observations in the STEIN instruments will provide i) stereo ENA imaging with a wide angle in local times, which are sensitive to the evolution of ring current phase space distributions, ii) suprathermal electron measurements with narrow spacings, which reveal the differential signature of accelerated electrons driven by Alfven waves and/or double layer formation in the ionosphere between the acceleration region and the aurora, and iii) suprathermal ion precipitation when the storm-time ring current appears. In addition, multi-spacecraft magnetic field measurements in low earth orbits will allow the tracking of the phase fronts of ULF waves, FTEs, and quasi-periodic reconnection events between ground-based magnetometer data and upstream satellite data.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.1
• /
• pp.123-129
• /
• 2012

Recently, interests on cleaning robots workable in pipes (termed as in-pipe cleaning robot) are increasing because Garbage Automatic Collection Facilities (i.e, GACF) are widely being installed in Seoul metropolitan area of Korea. So far research on in-pipe robot has been focused on inspection rather than cleaning. In GACF, when garbage is moving, the impurities which are stuck to the inner face of the pipe are removed (diameter: 300 mm or 400 mm). Thus, in this paper, by using TRIZ (Inventive Theory of Problem Solving in Russian abbreviation), an in-pipe cleaning robot of GACF with the 6-link sliding mechanism will be proposed, which can be adjusted to fit into the inner face of pipe using pneumatic pressure(not spring). The proposed in-pipe cleaning robot for GACF can have forward/backward movement itself as well as rotation of brush in cleaning. The robot body should have the limited size suitable for the smaller pipe with diameter of 300 mm. In addition, for the pipe with diameter of 400 mm, the links of robot should stretch to fit into the diameter of the pipe by using the sliding mechanism. Based on the conceptual design using TRIZ, we will set up the initial design of the robot in collaboration with a field engineer of Robot Valley, Inc. in Korea. For the optimal design of in-pipe cleaning robot, the maximum impulsive force of collision between the robot and the inner face of pipe is simulated by using RecurDyn(R) when the link of sliding mechanism is stretched to fit into the 400 mm diameter of the pipe. The stresses exerted on the 6 links of sliding mechanism by the maximum impulsive force will be simulated by using ANSYS$^{(R)}$ Workbench based on the Design Of Experiment(in short DOE). Finally the optimal dimensions including thicknesses of 4 links will be decided in order to have the best safety factor as 2 in this paper as well as having the minimum mass of 4 links. It will be verified that the optimal design of 4 links has the best safety factor close to 2 as well as having the minimum mass of 4 links, compared with the initial design performed by the expert of Robot Valley, Inc. In addition, the prototype of in-pipe cleaning robot will be stated with further research.

• Korean Journal of Soil Science and Fertilizer
• /
• v.47 no.3
• /
• pp.199-204
• /
• 2014

We conducted a short-term incubation experiment in order to understand the effect of the salinity of reclaimed coastal soils on nitrogen mineralization of livestock manure compost (LMC). Two soils with the same soil texture but different EC levels were collected from the same field. These samples were treated with 0%, 1%, 2%, and 3% of LMC by weight basis and incubated at $25^{\circ}C$ to observe changes in inorganic N contents, pH, and dehydrogenase activity with respect to time. As a result, regardless of the soil EC level, as the LMC increased, the total content of the inorganic N ($NH_4{^+}+NO_3{^-}$) increased. Difference in the soil EC level did not affect N mineralization of LMC greatly. The soil EC had negligible effect on the dehydrgenase activity as with the case of inorganic nitrogen. The $NH_4{^+}$ contents remained very low throughout the experimental period starting from the first week of incubation. We believe this is due to the high pH level (pH 7.9 and pH 8.3) of the original soils leading to ammonia volatilization. On the other hand the $NO_3{^-}$ content maintained high level as the LMC treatment level increased and reached maximum at the third week. The pH of the soil during incubation period decreased as the $NO_3{^-}$ contents increased and increased slightly after three weeks. The rise of pH level is believed to be from the $NO_3{^-}$ absorption for immobilization by microbes. In conclusion, the high soil $EC_{1:5}$ level of $12dS\;m^{-1}$ conducted in this experiment did not affect the growth in terms of soil microbes involved in N mineralization of LMC.

• Journal of Korean Society of Forest Science
• /
• v.99 no.4
• /
• pp.517-527
• /
• 2010

The purpose of this study was to investigate the causal relationship among perceived value, satisfaction and revisit intention for visitors of the Korea National Arboretum. Three hundred respondents were selected by quota sampling, and well-known measurement scales utilized in marketing field were adopted in order to measure three variables with some modification to apply for arboretum visitors. Results of structural equation model showed that perceived value affected visitors' satisfaction, which in turn influenced revisit intention. Specifically, "emotional value" had the most significant influence on satisfaction, followed by "value for money" and "novelty value"; however, "social value" was not an influential construct. Based on calibration results, several strategies were suggested for the effective management. Authors advised that (a)improvement of measurement scale of value, (b)inclusion of self-congruity as antecedent variable to satisfaction, (c)changing revisit intention to word-of-mouth communication as a post-purchase behavioral intention, and (d)implementation of market segmentation should be considered for future research.

• Journal of Nutrition and Health
• /
• v.38 no.10
• /
• pp.880-894
• /
• 2005

The purposes of this study were to a) measure the IC identified of CFMC (contract foodservice management company) ,b) examine IC circumstance of CFMC, c) evaluate practically IC measurement tool of CFMC, and d) present information for selecting an adequate CFMC to clients. The questionnaires of IC measurement were handed out to 108 CFMCs, there composing of main office employees, foodservice managers, customers, and clients of 207 school,38 hospital, and 86 husiness/industry foodservices. The statistical data analysis was completed using SPSS Win (ver 12.0) for descriptive analysis, t-test, Mann-Whitney U test. First, CFMCs had operational experience for an average of 8 years and 8 months, and served an average of 38,540 meals a day. Most of the respondent companies specialized in the school foodservice field and managed an average of 66 clients for the contract period of 2 years and 3 months. Second, the respondent companies had gotten a score of 77.78 points for the total average, 77.7 points in the large enterprise group and 78.1 points in the small and medium-sized enterprise group. Therefore, the minimum number of points for the accrediting license on Qualification is suggested to be over 70 out of a 100 point scale; this study would be serve as reference for the certification license on qualification. On the level of evaluation category, the scores were 14.15 to 20 points on $\ulcorner$finance$\urcorner$, 19.24 to 25 points on $\ulcorner$customer$\urcorner$, 19.33 to 25 points on $\ulcorner$process$\urcorner$, 14.31 to 20 points on $\ulcorner$human resource$\urcorner$, and 8.6 to 10 point on $\ulcorner$renewal and development$\urcorner$ . $\ulcorner$Renewal and development$\urcorner$ and $\ulcorner$customer focus$\urcorner$ received better grades than other evaluation categories. Third, $\ulcorner$Finance$\urcorner$ indicated similar distribution overall. Small and medium-sized companies had lower grades than large companies on 'market ability' of $\ulcorner$customer$\urcorner$ , but, clients of small and medium-sized companies had higher grade for 'client satisfaction' than large companies. Most of the companies supported 'infrastructure support for foodservice operation' of $\ulcorner$process$\urcorner$ by the main office of CFMCs, but, the branch chain offices of CFMCs were not applied efficiently. Large companies made more effort to improve the 'employee ability' of $\ulcorner$human focus$\urcorner$ than small and medium-sized CFMC. The 'research and development cost' of $\ulcorner$renewal and development$\urcorner$ was increased compared to the previous year. In conclusion, if CFMCs were to perform self-evaluation and a routine checkups by utilizing CFMC's IC measuring tool, improvements in CFMC operational capacities as well as foodservice quality can be noted. (Korean J Nutrition 38(10)'880$\sim$894,2005)

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.2
• /
• pp.28-36
• /
• 2019

The APR1400 (Advanced Power Reactor 1400MW) nuclear power plant is a large-scale national infrastructure facility with a total project cost of 8.6 trillion won and a project period of 10 years or more. The total project area is about 2.17 million square meters and consists of more than 20 buildings and structures. And the total number of drawings required for construction is about 65,000. In order to design such a large facility, it is important to establish a design standard that reflects the design intent and can increase conformity between documents (drawings). To this end, a design bases document (DBD) reflecting the design bases that extracted in regulatory requirements (e.g. 10CFR50, Korean Law, etc.) is created. However, although the design bases are important concepts that are a big framework for the whole design of the nuclear power plant, they are managed in 2-dimensional by the experts in each field fragmentarily. Therefore, in order to improve the usability of building information, we developed BIM(Building Information Model) based 3-dimensional design bases management system. For this purpose, the concept of design bases information layer (DBIL) was introduced. Through the simulation of developed system, design bases attribute and element data extraction for each DBIL was confirmed, and walls, floors, doors, and penetrations with DBIL were successfully extracted.