• 대한기계학회논문집B
• /
• 제27권6호
• /
• pp.726-735
• /
• 2003

A Process of 3-D Particle image velocimetry, called here, as '3-D volume PIV' was developed for the full-field measurement of 3-D complex flows. The present method includes the coordinate transformation from image to camera, calibration of camera by a calibrator based on the collinear equation, stereo matching of particles by the approximation of the epipolar lines, accurate calculation of 3-D particle positions, identification of velocity vectors by 3-D cross-correlation equation, removal of error vectors by a statistical method followed by a continuity equation criterior, and finally 3-D animation as the post processing. In principle, as two frame images only are necessary for the single instantaneous analysis 3-D flow field, more effective vectors are obtainable contrary to the previous multi-frame vector algorithm. An Experimental system was also used for the application of the proposed method. Three analog CCD camera and a Halogen lamp illumination were adopted to capture the wake flow behind a bluff obstacle. Among 200 effective particle s in two consecutive frames, 170 vectors were obtained averagely in the present study.

• 한국멀티미디어학회논문지
• /
• 제17권12호
• /
• pp.1446-1452
• /
• 2014

Existing LDA uses the transform matrix that maximizes distance between classes. So we have to convert from an image to one-dimensional vector as training vector. However, in 2D-LDA, we can directly use two-dimensional image itself as training matrix, so that the classification performance can be enhanced about 20% comparing LDA, since the training matrix preserves the spatial information of two-dimensional image. However 2D-LDA uses same calculation schema for transformation matrix and therefore both LDA and 2D-LDA has the heteroscedastic problem which means that the class classification cannot obtain beneficial information of spatial distances of class clusters since LDA uses only data correlation-based covariance matrix of the training data without any reference to distances between classes. In this paper, we propose a new method to apply training matrix of 2D-LDA by using WPS-LDA idea that calculates the reciprocal of distance between classes and apply this weight to between class scatter matrix. The experimental result shows that the discriminating power of proposed 2D-LDA with weighted between class scatter has been improved up to 2% than original 2D-LDA. This method has good performance, especially when the distance between two classes is very close and the dimension of projection axis is low.

• 전기학회논문지
• /
• 제65권10호
• /
• pp.1648-1654
• /
• 2016

This paper analyzes complex vector current control for the enhanced cross-coupling compensation in accordance with parameter variation in grid-connected inverter system, and verifies through simulation and experiment. Complex vector current control is performed in the synchronous reference frame through d-q transformation. It generates cross-coupling components with rotating nominal angular frequency. In general, cross-coupling elements are compensated by decoupling terms added to output of conventional decoupling PI controller. But, it is impossible to compensate them perfectly which transient response is especially deteriorated such as large overshoot and slow tracking, when variation of grid impedance or measurement error occurs. However, complex vector current control can improve stability and response characteristic of current control regardless of the situation as before. Decoupling controller and complex vector controller are represented through complex forms, and these controllers are analyzed by using frequency response in s-domain, respectively. It is verified that complex vector controller has more superior response characteristic than decoupling controller through MATALB, PSIM and experimental in 5kW grid-connected inverter when L filter parameter is varied from 1.1mH to increase double, 2.2mH.

• 대한의용생체공학회:의공학회지
• /
• 제31권6호
• /
• pp.456-463
• /
• 2010

In the present study, we proposed a new subspace scanning algorithm to enhance the spatial resolution of electroencephalography (EEG) and magnetoencephalography(MEG) source localization. Subspace scanning algorithms, represented by the multiple signal classification (MUSIC) algorithm and the first principal vector (FINE) algorithm, have been widely used to localize asynchronous multiple dipolar sources in human cerebral cortex. The conventional MUSIC algorithm used principal component analysis (PCA) to extract the noise vector subspace, thereby having difficulty in discriminating two or more closely-spaced cortical sources. The FINE algorithm addressed the problem by using only a part of the noise vector subspace, but there was no golden rule to determine the number of noise vectors. In the present work, we estimated a non-orthogonal signal vector set using independent component analysis (ICA) instead of using PCA and performed the source scanning process in the signal vector subspace, not in the noise vector subspace. Realistic 2D and 3D computer simulations, which compared the spatial resolutions of various algorithms under different noise levels, showed that the proposed ICA-MUSIC algorithm has the highest spatial resolution, suggesting that it can be a useful tool for practical EEG/MEG source localization.

• 충청수학회지
• /
• 제26권4호
• /
• pp.853-867
• /
• 2013

In this paper we study the cardinality of the dot product set generated by two subsets of vector spaces over finite fields. We notice that the results on the dot product problems for one set can be simply extended to two sets. Let E and F be subsets of the d-dimensional vector space $\mathbb{F}^d_q$ over a finite field $\mathbb{F}_q$ with q elements. As a new result, we prove that if E and F are subsets of the paraboloid and ${\mid}E{\parallel}F{\mid}{\geq}Cq^d$ for some large C > 1, then ${\mid}{\Pi}(E,F){\mid}{\geq}cq$ for some 0 < c < 1. In particular, we find a connection between the size of the dot product set and the number of lines through both the origin and a nonzero point in the given set E. As an application of this observation, we obtain more sharpened results on the generalized dot product set problems. The discrete Fourier analysis and geometrical observation play a crucial role in proving our results.

• Journal of Power Electronics
• /
• 제10권5호
• /
• pp.468-476
• /
• 2010

This paper proposes and develops a new direct voltage control (DVC) approach. This method is designed to be applied in various applications for AC drives fed with a three-phase voltage source inverter (VSI) working with a constant switching time interval as in the standard direct torque control (DTC) scheme. Based on a very strong min(max) criterion dedicated to selecting the inverter voltage vector, the developed DVC scheme allows the generation of accurate voltage forms of waves. The DVC algorithm is implemented on a dSPACE DS1104 controller board and then compared with the space vector pulse width modulation technique (SVPWM) in an open loop AC drive circuit. To demonstrate the efficiency of the developed algorithm in real time and in closed loop AC drive applications, a scalar control scheme for induction motors is successfully implemented and experimentally studied. Practical results prove the excellent performance of the proposed control approach.

• 한국정보전자통신기술학회논문지
• /
• 제5권1호
• /
• pp.13-19
• /
• 2012

본 논문에서는 계층적 삼차원 블록 영상분석을 이용한 폐결절 자동 검출 방법을 제안한다. 제안하는 블록 기반 폐 영상 분석 방법은 크게 두 부분으로 나눌 수 있다. 첫 번째는 블록을 분할하고 분석하고자 하는 대상 블록을 선택하는 과정이며 두 번째는 선택된 분석 대상 블록을 분석하는 과정이다. 첫 번째 과정을 통하여 선택된 분석대상 블록들은 다음 단계인 분석과정을 통해 결절과 비결절로 분리될 수 있다. 분석대상 블록의 중심에 있는 object에서 분석을 위한 형태 특징을 추출 하고, 추출된 형태 특징 값을 Support Vector Machine을 이용하여 결절과 비 결절로 분리한다.

• 융합신호처리학회논문지
• /
• 제5권2호
• /
• pp.96-105
• /
• 2004

2차원 이미지로부터 3차원 이미지 복원은 각 픽셀까지의 깊이 정보가 필요하고, 3차원 모델의 복원에 관한 일반적인 수작업은 많은 시간과 비용이 소모된다. 본 논문의 목표는 카메라가 이동하는 중에, 획득된 단안 영상에서 영역의 상대적인 깊이 정보를 추출하는 것이다. 카메라 이동에 의한 영상의 모든 점들의 움직임은 깊이 정보에 종속적이라는 사실에 기반을 두고 있다. 전역 탐색 기법을 사용하여 획득한 움직임 벡터에서 카메라 회전과 배율에 관해서 보상을 한다. 움직임 벡터를 분석하여 평균 깊이를 측정하고, 평균 깊이에 대한 각 영역의 상대적 깊이를 구하였다. 실험결과 영역의 상대적인 깊이는 인간이 인식하는 상대적인 깊이와 일치한다는 것을 보였다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2002년도 추계학술발표회 논문집
• /
• pp.201-204
• /
• 2002

• 한국멀티미디어학회논문지
• /
• 제5권5호
• /
• pp.552-561
• /
• 2002

본 논문은 쾌속조형(rapid prototyping) 시스템에서 사용되며 3D 기하학적 형상을 가지는 STL 파일에 워터마크를 삽입하고 추출하는 방법에 관한 연구이다. 제안된 알고리즘은 3D 형상의 왜곡이 없도록 하기위해, 패싯의 법선 영역과 꼭지점 영역에 워터마크를 삽입한다. 워터마크 비트들은 법선의 위치와 꼭지점의 순서 정보를 이용하여 삽입된다 제안된 알고리즘은 패싯의 저장 순서에 대한 종속성이 없으며, 워터마크의 비가시성 (invisibility)을 충족한다. 제안된 알고리즘으로 3D 기하학적 형상에 워터마크를 삽입하고 추출하는 실험 결과들은 STL로 표현된 3D원형상에 영향을 주지 않고 워터마크의 삽입과 추출이 가능함을 보여준다.