• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1986년도 추계학술발표회 논문집
• /
• pp.182-185
• /
• 1986

In this paper, the four algorithm which obtain 2D displacement vector are proposed. In corwocutive difference pictures, the characteristics of up DP boundary and region are discussed and we estimate displacement vector using the DP boundary and region, Finally, the performance of proposed algorithm for gaussian noisy image which generated by computer are discussed.

• Journal of the Optical Society of Korea
• /
• 제18권6호
• /
• pp.650-656
• /
• 2014

We propose a novel active fiber design for selectively generating cylindrical vector beams (CVBs) or cylindrical vector modes (CVMs) which can be applied to conventional fiber lasers. A fiber is designed to have a ring-shaped core refractive index profile which can lead to the best overlap between the active dopant distribution profile and the lowest-order CVM (LCVM) field profile. Therefore, the overlap factor (OVF) of the LCVM becomes even higher than that of the fundamental mode. We emphasize that this condition cannot be satisfied by a conventional step-index core fiber (SICF) but by the ring-doped core fiber (RDCF). Because the lasing threshold is inversely proportional to the OVF, the LCVM can predominantly be stimulated even without going through special procedures to impose extra loss mechanisms to the fundamental mode. We numerically verify that the OVF of the LCVM with the doped ions can significantly exceed that of the fundamental mode if the proposed fiber design is applied. In addition, an RDCF of the proposed fiber design can also operate in a regime containing no higher-order modes besides the LCVM, so that it can selectively and efficiently generate the LCVM without being disrupted by the parasitic lasing of the higher-order modes. We highlight that an optimized RDCF can lead to a >30 % higher OVF ratio than a SICF having the same doped area. The proposed model is expected to be useful for enhancing the efficiency of generating CVBs in an all-fiber format.

• 한국방사선학회논문지
• /
• 제18권3호
• /
• pp.231-237
• /
• 2024

뇌손상에서 생존자의 경우 지속적인 장애를 유발하고 뇌출혈에 따른 경막외 혈종(EDH) 및 경막하 혈종(SDH)은 주요 임상 질환 중 하나라고 볼 수 있다. 본 연구에서는 컴퓨터단층검사(CT; Computed Tomography) 영상을 기반으로 뇌출혈에 따른 혈종을 자동 분할하고 3차원으로 모델링하고자 하였다. 혈종의 자동 분할을 위해서 개선된 GVF(gradient vector flow) 알고리즘을 구현하였다. 영상으로부터 경사 벡터를 계산과 반복계산을 거친 후 자동 분할을 하고 분할 좌표를 이용해서 3차원 모델을 생성하였다. 실험결과, 혈종의 경계에 대해서 정확하게 분할 성공하였다. 경계 부분과 얇은 혈종부분에서도 결과가 좋은 것으로 나타났고, 3차원 모델을 통해서 여러 방향에서 혈종의 강도, 확산 방향, 면적 등을 알 수 있었다. 본 연구에서 개발 한 뇌출혈 부위의 평면정보와 3차원 모델은 의료진에게 보조적인 진단자료로서 활용 될 수 있을 것으로 판단한다.

• 한국수학교육학회지시리즈D:수학교육연구
• /
• 제18권4호
• /
• pp.289-305
• /
• 2014

The current mathematical education calls for a learning environment from the constructionism perspective that actively creates mathematical objects. This research first analyzes JavaMAL's expression 'move' that enables students to express the agent's behavior constructively before they learn vector as a formal concept. Since expression 'move' is based on a coordinate, it naturally corresponds with the expression of vectors used in school mathematics and lets students take an embodied approach to the concept of vector. Furthermore, as a design tool, expression 'move' can be used in various activities that include vector structure. This research studies the educational significance entailed in JavaMAL's expression 'move'.

• 한국수학교육학회지시리즈D:수학교육연구
• /
• 제7권1호
• /
• pp.59-67
• /
• 2003

In linear algebra course, the theory of vector space is usually presented in a very formal setting, which causes severe difficulties to many students. In this study, the effect of teaching the theory of vector space in linear algebra from the geometrical point of view on students' learning was investigated. It was found that the teaching of the theory of vector space in linear algebra from the geometrical point of view increases the meaningful loaming since it increases the visualization.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2067-2069
• /
• 2002

The study of the vector control of the induction machine without speed sensor is going on and there are the adaptive performance method to use the flux observer. This study is to make the vector control without the speed sensor based on the flux oriented reference vector control theory. This paper proposes the new speed follow-up method to deduce the current value in the current sensor and the 2 order flux observer based on the observer theory and examine the possibility to realize the flux oriented vector control system using the simulation in this proposed method of this study.

• 음성과학
• /
• 제11권4호
• /
• pp.17-28
• /
• 2004

In this paper, we propose a statistical approach to improve the performance of spectral quantization of speech coders. The proposed techniques compensate for the distortion in a decoded line spectrum pairs (LSP) vector based on a statistical mapping function between a decoded LSP vector and its corresponding original LSP vector. We first develop two codebook-based probabilistic matching (CBPM) methods based on linear mapping functions according to different assumption of distribution of LSP vectors. In addition, we propose an iterative procedure for the two CBPMs. We apply the proposed techniques to a predictive vector quantizer used for the IS-641 speech coder. The experimental results show that the proposed techniques reduce average spectral distortion by around 0.064dB.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권8호
• /
• pp.413-424
• /
• 2002

Recently, in the linear motion system, high performances are required In dynamic characteristics. Vector control method is capable of instantaneous thrust control can meet these high performance requirements. Linear induction motor(LIM) have static and dynamic end effects due to its finite core length, so that per-phase impedances are asymmetric and an air gap flux distribution is distorted. These points of the d-q axis equivalent circuit model considering both end effects is more complicated. This paper proposes the d-q axis equivalent circuit and the vector control method considering both static and dynamic end effects of the LIM. As a result, it is shown that the results of the equivalent circuit method(ECM) have a good agreement with those of the finite element method(FEM).

• 정보처리학회논문지B
• /
• 제11B권3호
• /
• pp.257-266
• /
• 2004

본 논문은 윤곽선만을 추출하여 캐리커처를 생성하던 기존의 시스템과 달리 음영을 윤곽선과 합성하여 캐리커처를 생성하는 캐리커처 생성 시스템을 제안한다. 이 방식을 사용할 경우 얼굴의 텍스추어 정보까지 생성시 고려하기 때문에 좀 더 실사형에 근접한 캐리커처를 생성할 수 있다. 본 논문에서 제안하는 시스템은 벡터를 기만으로 하기 때문에 사이즈에 제한 없이 자유로운 변형이 가능할 뿐만 아니라 2D 캐릭터에 자유로운 표정을 적용하는 데에도 쉽게 적용이 가능하다. 또, 벡터의 특징으로 인해 모바일 상에서도 적은 용량으로 이용 가능하다. 본 논문은 벡터 형태의 캐리커처를 생성하는 방법과 음영을 제작 및 합성하는 방법을 함께 제시한다.

• 한국추진공학회지
• /
• 제17권2호
• /
• pp.84-93
• /
• 2013

차세대 전투기 및 무인 전투기의 경우 스텔스성과 고 기동성, 초음속 순항 등의 임무들이 필수적으로 요구된다. 이러한 고성능 요구조건을 만족하기 위하여 초음속 배기노즐의 추력편향제어기법이 대두되고 있다. 본 연구에서는 2차원 초음속 추력편향노즐의 축소모델을 이용하여, 피치 편향각 및 피치 플랩길이에 따른 추력을 측정하고, 동시에 초음속 유동에 대한 쉴리렌 가시화를 수행하였다. 연구결과 추력편향시의 유동특성을 이해할 수 있었고, 추력 편향 시 최적의 피치편향 효율을 가지는 추력편향노즐의 기하학적 형상을 도출 할 수 있었다.