• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.33.2-33.2
• /
• 2009

Dielectric and piezoelectric properties of Lead-free $(1-x)(Bi_{0.5}K_{0.5})TiO_3-xBiFeO_3$ceramics prepared by a conventional solid state reaction method were investigated in the range of x = 0~10 mol%. Piezoelectric coefficient was increased from 31 pC/N at x = 0 mol% to 64 pC/N at x = 6 mol% then decreased with increasing x. Electromechanical coupling factor ($K_p$) was increased up to 0.18 at x = 10 mol%. On the other hand, mechanical quality factor ($Q_m$) was decreased. Grain size was not much changed with various x and a single perovskite with tetragonal symmetry was maintained at all compositions forming a solid solution between $(Bi_{0.5}K_{0.5})TiO_3$ and $BiFeO_3$. Depolarization temperature ($T_d$) was gradually decreased with increasing x from $302^{\circ}C$ at x = 0 to $245^{\circ}C$ at x = 10 mol%.

• Molecules and Cells
• /
• 제37권11호
• /
• pp.819-826
• /
• 2014

Protein modifications of recombinant pharmaceuticals have been observed both in vitro and in vivo. These modifications may result in lower efficacy, as well as bioavailability changes and antigenicity among the protein pharmaceuticals. Therefore, the contents of modification should be monitored for the quality and efficacy of protein pharmaceuticals. The interface of EPO and its receptor was visualized, and potential amino acids interacting on the interface were also listed. Two different types of modifications on the interface were identified in the preparation of rHu-EPO BRP. A UPLC/Q-TOF MS method was used to evaluate the modification at those variants. The modification of the oxidized variant was localized on the Met54 and the deamidated variants were localized on the Asn47 and Asn147. The extent of oxidation at Met54 was 3.0% and those of deamidation at Asn47 and Asn147 were 2.9% and 4.8%, respectively.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권1호
• /
• pp.1-8
• /
• 2006

Now a day, owing to high efficiency and easy speed control of brushless DC(BLDC) motor, the demand of BLDC motor that has high power and low noises are increasing. Especially demand of interior permanent magnet(IPM) BLOC with high efficiency and high power in electric motion vehicle is increasing. IPM BLDC motor has permanent magnets in the rotor. Because it has two different flux paths, magnetic reluctance differences are generated in d-axis and q-axis. As the result of the inductance differences that are generated by the saliency(magnetic reluctance differences) in the rotor, the motor has structure advantage that has the additional reluctance torque except a magnet torque and because magnet is situated inside the rotor, the mechanical structure is strong. Therefore IPM BLDC motor makes possible to have high speed and high power. This paper presents a design and characteristics analysis of IPM BLDC motor for electric vehicle. To design IPM BLDC motor, surface mounted permanent magnet(SPM) BLDC motor is used as the initial design model. According to the shape-ratio() of permanent magnet, the characteristic of IPM BLDC motor is analyzed by Finite element method (FEM). Characteristics analysis results of the designed motor are compared with the experimental results.

• 터널과지하공간
• /
• 제18권4호
• /
• pp.243-251
• /
• 2008

최근 환경문제 및 법적규제의 강화로 광산의 개발이 노천채광에서 갱내채광으로 전환됨에 따라 지하채굴 공동의 안정성이 광산의 운영 및 생산성 부분에서 최대 관심사로 대두되고 있다. 따라서 본 연구에서는 갱내채광 설계와 안정성 평가의 입력 자료로 활용하기 위해 지질조사, 불연속면 조사, 실내 암석실험, 암반분류를 수행하였으며, 암반분류 결과를 이용하여 무지보로 안정을 유지할 수 있는 채굴 공동과 광주의 규격을 결정하였다. 또한, 경험적 방법(stability graph, 한계 공동폭 곡선)과 3차원 수치해석을 통하여 지하채굴 공동의 안정성을 평가하였다.

• 한국재료학회지
• /
• 제33권4호
• /
• pp.151-158
• /
• 2023

In this study, a new type of composite material combined with carbonyl iron, a relatively strong ferromagnetic material, was prepared to overcome the current application limitations of Prussian blue, which is effective in removing radioactive cesium. The surface of the prepared composite was analyzed using SEM and XRD, and it was confirmed that nano-sized Prussian Blue was synthesized on the particle surface. In order to evaluate the cesium removal ability, 0.2 g of the composite prepared for raw cesium aquatic solution at a concentration of 5 ㎍ was added and reacted, resulting in a cesium removal rate of 99.5 %. The complex follows Langmuir's adsorption model and has a maximum adsorption amount (q_e) of 79.3 mg/g. The Central Composite Design (CCD) of the Response Surface Method (RSM) was used to derive the optimal application conditions of the prepared composite. The optimal application conditions achieved using Response optimization appeared at a stirring speed of pH 7, 17.6 RPM. The composite manufactured through this research is a material that overcomes the Prussian Blue limit in powder form and is considered to be excellent economically and environmentally when applied to a cesium removal site.

• 반도체디스플레이기술학회지
• /
• 제21권4호
• /
• pp.45-49
• /
• 2022

Through Silicon Via (TSV) is a technology that interconnects chips through silicon vias. TSV technology can achieve shorter distance compared to wire bonding technology with excellent electrical characteristics. Due to this characteristic, it is currently being used in many fields that needs faster communication speed such as memory field. However, there is performance degradation issue on TSV technology due to the parasitic capacitance. To deal with this problem, in this study, the parasitic capacitance with TSV design factors is analyzed using commercial tool. TSV design factors were set in three categories: size, aspect ratio, pitch. Each factor was set by dividing the range with TSV used for memory and package. Ansys electronics desktop 2021 R2.2 Q3D was used for the simulation to acquire parasitic capacitance data. DOE analysis was performed based on the reaction surface method. As a result of the simulation, the most affected factors by the parasitic capacitance appeared in the order of size, pitch and aspect ratio. In the case of memory, each element interacted, and in the case of package, it was confirmed that size * pitch and size * aspect ratio interact, but pitch * aspect ratio does not interact.

• 기술혁신학회지
• /
• 제16권1호
• /
• pp.252-278
• /
• 2013

절충교역 제도는 무기체계 거래 시 구매국이 관련 선진기술 등을 무상으로 획득할 수 있는 수단으로써 전 세계 다수 국가에서 국방 전력증강을 위해 활용하고 있다. 절충교역 계약은 화폐가 아닌 '가치'를 기준으로 하며, 그 가치는 관련 법규에서 정한 수준 이상을 만족해야한다. 이에 따라 국외업체가 제안한 기술의 가치를 객관적이고 합리적으로 평가할 수 있는 방법론이 필수적으로 요구된다. 현재 절충교역 기술가치평가는 국방기술품질원, 국방과학연구소 등에서 각각의 평가기법을 활용하여 실시하고 있다. 그러나 가치평가를 위한 분석지표가 한정되어 있어 절충교역으로 획득가능한 다양한 기술의 모든 특성을 반영하기에는 한계성이 존재한다. 본 논문에서는 이에 착안하여 절충교역으로 획득되는 기술분야인 부품제작 기술, 창정비 기술, 군수장비 성능개량 기술, 연구개발 기술별로 특성을 반영한 각각의 분석지표를 개발하였으며, 이를 위해 델파이 기법을 활용하였다. 또한 요인분석을 통해 개발된 분석지표를 분류함으로써 향후 활용성이 용이하도록 하였다. 연구결과로 도출된 분석지표를 활용함으로써 각 획득기술별로 보다 정확한 평가를 할 수 있을 것이며 이를 통해 절충교역 협상 시 우리나라의 국외 협상력을 제고시킬 수 있을 것으로 기대된다.

• 한국전자통신학회논문지
• /
• 제9권1호
• /
• pp.17-24
• /
• 2014

본 논문에서는 직접결합에 의한 저 위상잡음 유전체 공진기 설계를 위하여, 고유전율의 유전체 공진기와 마이크로스트립선로 사이의 결합계수에 대해 분석하였으며, 고유전율로 인한 Q값의 보완을 위한 병렬궤환 회로 적용한 유전체 공진 발진기의 위상잡음을 분석하였다. 유전체 공진기의 위상잡음 분석과 결합계수의 분석을 통하여 고안정 유전체 공진 발진기를 최적화 설계한 결과 20.25GHz 유전체 공진 발진기의 ${\epsilon}_r$=30인 유전체 공진기를 사용한 경우 결합계수가 약 3.6의 값을 나타낼 때 20.25GHz에서 위상잡음은 -84.3dBc/Hz@1KHz를 나타냄을 확인하였다. 본 연구의 결과로 K-Band 에서도 주파수 체배 방식에 의한 위상잡음 손실을 방지하는 직접결합 설계 방안을 제시하였다.

• 한국건축시공학회지
• /
• 제19권6호
• /
• pp.521-527
• /
• 2019

국내 철근콘크리트공사 현장에서는 철근량을 산출하기 위해 2D도면을 이용하여 복잡한 식을 사용한다. 내역서상의 철근 내역이 전체 철근량으로 작성되는 것을 고려했을 때, 현행 철근량 산출방식은 다소 비효율적이라고 판단된다. 이에 본 연구는 공공청사, 학교, 공동주택 각 유형별 10개의 프로젝트에 실적데이터를 바탕으로, 콘크리트량 대비 철근량 비율을 산출하여 사례를 검증하였다. 연구결과 AACE가 제시한 상세견적 단계의 정확도 범위 안에 포함되었으며, 프로젝트 전체 철근량은 상세견적 단계 오차율범위에도 포함 되는걸 확인할 수 있었다. 향후 부재별 유형에 따라 적용할 수 있는 보정 값을 산출하여 오차범위를 줄여 부재별 철근 산출량 오차율이 상세견적단계에서도 적용이 가능한 연구가 필요하다고 판단된다.

• 한국세라믹학회지
• /
• 제52권1호
• /
• pp.77-82
• /
• 2015

The effect of the electrode type on the dielectric and piezoelectric properties of $Pb(Mg_{1/3}Nb_{2/3})O_3-PbZrO_3-PbTiO_3$ (PMN-PZT) single crystals was investigated in an effort to improve their properties for various piezoelectric applications. First, three different types of PMN-PZT single crystals [PMN-PZT-A (piezoelectrically soft type; dielectric constant ~ 10,000), PMN-PZT-B (piezoelectrically soft type; phase-transition temperature between the rhombohedral and tetragonal phases ($T_{RT}$) ~ $145^{\circ}C$), PMN-PZT-C (piezoelectrically hard type; high mechanical quality factor ($Q_m$) ~ 1,000)] were fabricated using the solid-state single crystal growth (SSCG) method. Then, four different types of electrodes [sputtered Au, sputtered Cr/Au, sputtered Ti/Au, and fired Ag] were formed on the single crystals, and their dielectric and piezoelectric properties were measured. The single crystals with a sputtered Ti/Au electrode showed the highest dielectric and piezoelectric constants but the lowest coercive electric field ($E_C$). The single crystals with a fired Ag electrode showed the lowest dielectric and piezoelectric constants but the highest coercive electric field ($E_C$). This dependence on the type of electrode was most significant in the piezoelectrically hard PMN-PZT-C single crystals. However, the effects of the electrode type on the phase transition temperatures ($T_C$, $T_{RT}$) and dielectric loss were negligible. These results clearly demonstrate that it is important to select an appropriate electrode so as to maximize the dielectric and piezoelectric properties of single crystals in each type of piezoelectric application.