• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.2
• /
• pp.145-152
• /
• 2010

This study evaluated the fatigue degradation in a SUS316L specimen using the nonlinear ultrasonic method. The nonlinearity of the ultrasonic wave was estimated by a relative nonlinear parameter defined as the ratio of the amplitudes for the fundamental wave to the second harmonic wave. In the experiment, a measurement system with contact transducers was constructed; reliable measurements were assured by keeping measurement conditions consistent and reducing extra harmonics generated in the measurement system. Two types of SUS316L specimen were used in experiments; a rotating bar fatigue specimen and a tensile fatigue specimen. The fatigue condition used was high cycle fatigue. The former specimen had a cylindrical shape and was used to observe the change in the nonlinear parameter after fatigue accumulation in a specimen. The latter was a plate-shaped specimen and was used to confirm the change in the nonlinear parameter at the position where the fatigue stress was concentrated. The measured nonlinear parameter showed a strong correlation to the damage level in both fatigue tests.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.3
• /
• pp.463-470
• /
• 2016

A vane shear test (VST) is a simple testing method for determining an undrained shear strength of cohesive soils by minimizing soil disturbance. In this study, the VST was used to determine a shear strength of sand. Dry Nakdong River sand was prepared for loose and dense conditions in a cell and then pressurized with 25, 50, 75 or 100 kPa from the surface of sand. A vane (5 cm in diameter and 10 cm in height) was rotated and a torque was measured within sand. When a torque moment by vane and friction resistance moment by sand is assumed to be equalized, a friction angle can be obtained. When a vane rotates within clay, a uniform undrained shear strength is assumed to be acting on cylindrical failure surface. On the other hand, when it is applied for sand, the failure shape can be assumed to be an octagonal or square column. The relationship between measured torque and resistant force along assumed failure shapes due to friction of sand was derived and the internal friction angle of sand was determined for loose and dense conditions. For the same soil condition, a series of direct shear test was carried out and compared with VST result. The friction angle from VST was between 24-42 degrees for loose sand and 33-53 degrees for dense sand. This is similar to those of direct shear tests.

• Journal of Yeungnam Medical Science
• /
• v.21 no.1
• /
• pp.40-50
• /
• 2004

Background: This study was conducted to analyze the height and width of the pedicle of the upper and lower levels on the concave and the convex sides. In addition, we checked for the appropriate pedicle screw size which could be screwed in without complications. Materials and Methods: Taking a simple AP radiography in a standing position, 99 vertebrae on the major curve with the possibility of 3-D reconstruction were analyzed after checking the CT in a supine position of 22 idiopathic scoliosis. We measured Cobb's angle from a simple radiograph, and measured the size of the isthmus by the Inner Space 3-D Editor after 3-D reconstruction with the Inner Space 3-D program in the DICOM file transformed from CT image. We then analyzed the size of pedicles of the upper and lower levels on the concave and the convex sides by measuring the height and width of the pedicle. Results: All pedicles on the concave side were smaller than those on the convex side. Their size increased as the measurement moved from the upper to lower vertebra, except for the upper thoracic vertebra. When the width of the pedicle through 3-D reconstruction was compared with the narrowest width of the pedicle measured by using CT, the width of the pedicles through 3-D reconstruction was statistically smaller (P<0.01). Most of the pedicles were tear-drop or kidney shaped rather than cylindrical. Conclusion: These results suggest that the use of the coronal plane through 3-D reconstruction would be necessary for an accurate measurement of the size of the pedicle. It is important to pay careful attention to the screw size and the screwing method considering the pedicle shape through 3-D reconstruction.

• Parasites, Hosts and Diseases
• /
• v.26 no.3
• /
• pp.179-188
• /
• 1988

The life cycle of Fibricola seoulensis was studied in the laboratory and in the field, with special interests in the larval developments within the eggs and in the intermediate hosts. The first emergence of miracidia after incubation of eggs in 26C water began on the ninth day. The miracidia, elongate and cylindrical shape, had epidermal plates in the formula of 6, 9, 4 and 3, with two pairs of flame cells and lateral processes. A kind of fresh water snail, Hippeutis (H.) cantori, was found to shed furcocercous cercariae from the 13th day after experimental challenge with miracidia while Physa acute failed to shed. The same kind of snail collected from the field also shed the same cercariae. The cercariae were equipped with 2 pairs of penetration glands and 5 pairs of fame cells. The tadpoles of Rana nigromaculata were found susceptible to experimental infection with the cercariae. The same kind of tadpoles collected from various areas were also found naturally infected. The metacercariae in the tadpoles which were infected experimentally became infective to the definitive host in 21 days. The metacercariae were located free in the body cavity of tadpoles, and attained sexual maturity in rats in 7 days. The present study successfully followed the complete life cycle of F. seoulensis and found that it is possible to maintain the life cycle in the laboratory.

• Research in Plant Disease
• /
• v.13 no.1
• /
• pp.15-19
• /
• 2007

A wilt disease on the greenhouse-grown chrysanthemum occurred at Kumi, Masan and Busan, Korea in $2003{\sim}2005$. Symptoms of wilting, yellowing, and marginal burning started from lower leaves and progressed upward. Early symptoms often appeared on one side, involving only one part of the plant or one side of individual leaves or stems without a vascular discoloration. Vascular tissues of the infected leaf-base's discolored to brown. Fungal isolates obtained from discolored tissues were identified as Verticillium dahliae based on its cultural and morphological characteristics. The fungus showed whitish to creamy colony pattern with abundant dark brown to black elongated microsclerotia on PDA. Conidiophores were verticillately branched and conidia were ellipsoidal to sub-cylindrical shape, and measured as $2.5{\sim}8.8{\times}2.0{\sim}3.8{\mu}m$. Pathogenicity tests by root dipping resulted in similar symptoms observed in the naturally infected chrysanthemum in fields.

• Research in Plant Disease
• /
• v.13 no.2
• /
• pp.122-125
• /
• 2007

Leaf spot disease of Kalanchoe (Kalanchoe blossfeldiana) occurred at the farmer's vinly house in Gangseo-gu, Busan Metropolitan City, Korea, 2006. The diseased plants with typical symptom were collected and the casual agent were isolated. Its mycological characteristics and pathogenicity were examined. The results were as follows. The typical symptoms of the disease appeared as small brownish or dark brown spot on both sides of the leaves. The spots tended to develop from lower leaves. The spots gradually enlarged into conspicuous necrotic lesions 1-5 mm in diameter. Colonies of the causal fungus formed on potato dextrose agar were velvety, gray or grayish brown in color, Conidia were cylindrical or obclavate to oblong in shape, brown in color, $24{\sim}65\;{\times}\;12{\sim}23\;{\mu}m$ in size and had 1-4 transverse septa, The optimum temperature for growth of the fungus was about $25-30^{\circ}C$. Conidiophores were brown in color, $32{\sim}135\;{\times}\;4{\sim}8\;{\mu}m$ in size and had 1-7 transverse septa. The fungus was identified as Stemphylium lycopersici (Enjoji) Yamamoto based on its symptom and mycological characteristics. This is the first report of leaf spot of Kalanchoe caused by S. lycopersici in Korea.

• Journal of Periodontal and Implant Science
• /
• v.36 no.3
• /
• pp.673-682
• /
• 2006

Recent study shows that implant design has a great impact on initial stability in bone. The ITI $TE^{(R)}$ implant, designed originally for immediate placement has a tapered/ cylindrical form which fits the anatomical shape of the natural alvelous or tooth root. The increased diameter at the collar region coupled with more threads lead to more bone contact and enhanced stability. The aim of this retrospective study is to evaluate the clinical use and the efficacy of recently introduced ITI TE implant with a new macro-design. The following results are compiled from 139 patients who received ITl TE implant surgery at the periodontal department. of Yonsei University Hospital between July 2002 and September 2005. 1. 139 patients received 173 ITl $TE^{(R)}$ implants in their maxilla and mandible (Mx 82, Mn 91). Posterior area accounted for 84% of the whole implant surgery, 2. In the distribution of bone quality, type III(41,0%) was the most, followed by type IV(41,0%) and type II (27.7%). As for the bone quantity, type B(43.9%) was the most, followed by type C(42.2%), type D(12.2%) and type A(1.7%). 3. 125 implants(83.9%) were treated by single crown, which accounted for the majority. 4, The total implant survival rate was 100% after a mean follow-up period of 21.2 months. This preliminary data with ITl $TE^{(R)}$ implant showed excellent survival rate although the majority of implants evaluated in this study were placed in the posterior region of the jaw and compromised sites.

• Clean Technology
• /
• v.13 no.1 s.36
• /
• pp.34-45
• /
• 2007

Phase behavior of the ternary systems of water-insoluble simvastatin drug, which is well known to be effective drugs for hypercholesterolemia therapy, in solvent mixtures of dichloromethane and supercritical carbon dioxide was investigated to present a guideline of establishing operating conditions in the particle formation of the drugs by a supercritical anti-solvent recrystallization process utilizing dichloromethane as a solvent and carbon dioxide as an anti-solvent. The solubilities of simvastatin in the mixtures of dichloromethane and carbon dioxide were determined as functions of temperature, pressure and solvent composition by measuring the cloud points of the ternary mixtures at various conditions using a high-pressure phase equilibrium apparatus equipped with a variable-volume view cell. The solubility of the drug increased as the dichloromethane composition in solution and the system pressure increases at a fixed temperature. A lower solubility of the drug was obtained at a higher temperature. The second half of this work is focused on the particle formation of the simvastatin drug by a supercritical anti-solvent recrystallization process in a cylindrical high-pressure vessel equipped with an impeller. Microparticles of the simvastatin drug were prepared as functions of pressure (8 MPa to 12 MPa), temperature (303.15 K, 313,15 K), feed flow rate of carbon dioxide, and stirring speed (up to 3000 rpm), in order to observe the effect of those process parameters on the size and shape of the drug microparticles recrystallized.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.9
• /
• pp.1438-1443
• /
• 2001

The significance of the casting/forging process for reducing the production cost of large components is being noted in these days. This casting/forging process is a method of forging a workpiece preformed by casting into the final shape. In this study, the casting/forging process has been applied in manufacturing a large aluminum flange in order to reduce press capacity and material cost. Firstly, a hot compression test was performed with cast cylindrical billets in order to determine the optimum forging condition of the aluminum flange. The optimum range of forging temperature of Al 5083 was from 420$\^{C}$ to 450$\^{C}$. The suitable strain rate was 1.5 sec(sup)-1. The deformation amount of a preform of a preform in a forging process is a key role in the mechanical properties of casting/forging products. In order to find the change of mechanical properties according to effective stain of cast aluminum billets, a hot upsetting test were performed with rectangular blocks and then a uniaxial tensile test was performed with specimens cut from the upsetted billets. The tensile strength and the elongation of cast/upsetted aluminum billets were increased largely until the effective strain was 0.7. FE analysis was performed to determine the configurations of case preform and die for an aluminum flange. In the FE analysis, the forging load-limit was fixed 1500ton for low equipment cost. The cast preform was designed so that the effective stain around the neck of a flange exceeded 0.7. From the result of FE analysis, optimal configurations of the cast preform and the die were designed for a large flange. The filling and solidification analysis for a sound cast-preform was carried out with MAGMA soft. In the forging experiment for an aluminum flange, it was confirmed that the optimal configuration of the cast preform predicted by FE analysis was very useful. The cast/forged products using designed preform were made perfectly without any defects.

• Journal of Biomedical Engineering Research
• /
• v.17 no.1
• /
• pp.19-24
• /
• 1996

The purpose of this paper is to design high-order (or radial) surface gradient coil (SGC), which can provide multi-dimensional spatial selection. Although the spatial Selection with High-Order gradienT (SHOT) can provide a 2-D selection with only one selective RF pulse, the high-order gradient pro- duced by conventional cylindrical-shape coils has not been clinically useful due to the large selection size caused by the limited radial gradient intensity. However, by using the proposed high-order SGCs located near the imaging region, the size of volume selection can be reduced to a clinically useflll size of 1-2 cm in diameter by applying stronger radial gradient field with much less gradient driving power. So far radial SGCs have been designed by using the field component method and may cause distortion in the selection shapes. In this paper, by using the target field approach for the coil design, selected volumes became almost circular. A 40 cm-by-40 cm $z^2$_surface gradient coil has been designed and implemented by using the target field approach. Phantom and volunteer studies have been performed Experimental results using spatially localized MRI show good agreement to the theoretically predicted behavior.