• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.4
• /
• pp.362-369
• /
• 2014

A railway SCADA system is a control systems that provide the trains with the electricity. A railway SCADA system sends commands to the RTUs(remote terminal unit) and then it gathers status information of the field devices in the RTUs or controls field devices connected with the RTUs. The RTU can controls input output modules directly, gathers the status information of the field devices connected with it, and send the information to the control center. In this way, a railway SCADA system monitors and controls the electricity power for running trains. The cyber attackers may use some vulnerabilities in the railway SCADA system software to attack critical infrastructures. The vulnerabilities might be created in the railway software development process. Therefore it need to detect and remove the vulnerabilities in the control system. In this paper we propose a new control protocol fuzzing method to detect the vulnerabilities in the DNP3 protocol based application running on VxWorks in RTU(Remote Terminal Unit) that is a component of the centralized traffic control system for railway. Debug-channel based fuzzing method is required to obtain process status information from the VxWorks.

• Journal of the Korean Society of Costume
• /
• v.56 no.3 s.102
• /
• pp.1-11
• /
• 2006

Che Guevara spearheading the Cuban Revolution was not only the icon as the revolutionary to the New-leftists of the 1960s advocating the ideology of Marxism but, as the cultural revolutionary, had a tremendous influence on the younger generation living in the digital age Che Guevara take on a figure of both the symbol of the Leftist but the romantic revolutionary because he had the external features such as black beret, red stars, military upper jackets and trousers, beard and pipe tobacco. In fact, the symbolic image of Che Guevara was made as the popular image by the avantgarde artists and political vanguard forces of the times under the necessity of Cuban government. Afterwards, the image of Che Guevara has been patronized in making people of aware of the resistant and revolutionary image to capital, power and the power of the media and symbolized as the resistant image to the American capital as well as the revolutionary guerrilla. And his image has continued to be reproduced and symbolized for the commercial and political purposes and as the enthusiastic image of youth culture. This can be seen as having been created as a new image by the popular culture formed by the development of the cyber culture and mass media in the cyberspace shaped by contemporary 'N' generations. The use of Che Guevara's symbolic image was made in the fashion field as well as in the cultural and artistic circles. The borrowing of the icon of Che Guevara represented in a fashion field is attributed to his free spirit, and it can be seen that fashion exists as the vehicle for representing both the symbol system and the sign system containing ideologies and texts as the communicator of resistance to the regime and to social issues. Therefore, this study attempted to investigate the commercial iconization of Che Guevara in the 1990s by comparing the ideology of the symbol in the 1960s and the 1990s and inquire into the borrowing of his image by the fashion domain as well as the fashion worn by him by reference to domestic books and materials on the fashion site. Thereby, this study attempted to make clear that the borrowing of Che Guevara in the realm of fashion since the 1990s not only contained the meaningful interpretation as the symbolic code in the culture of young people living in a digital era but fashion performs an intervening role in the cultural phenomenon.

• Journal of Digital Convergence
• /
• v.12 no.2
• /
• pp.119-128
• /
• 2014

This Study investigated the differences of risk assessment tool and personality assessment inventory (PAI) by recidivism types of juvenile delinquents, the psychological factors that have a influence of juvenile behaviors. 268 incipient Juvenile criminals who had committed crime in the areas of Seoul, were categorized in the three degree of recidivism types. The result showed the significant differences among risk assessment tool, such as family functioning risk factor, school risk factor, away-from-home risk factor, delinquent risk factor, and personal risk factor. PAI scores among the recidivism type showed the significant differences on SOM, DEP, PAR, SCZ, BOR, ANT, ALC, DRG, AGG, SUI, STR, NON, DOM, and WRM. The predictor variables explained a risk assessment tool were STR, ALC, DEP, DOM and WRM in PAI scales. And the interventions and preventions about juvenile delinquents discussed in psychological aspects.

• Journal of Convergence for Information Technology
• /
• v.10 no.6
• /
• pp.128-139
• /
• 2020

The purpose The purpose of this study was to compare and observe research trends of sex education for young children·elementary school students·middle school students, provide base material for research on sex education, and present research prospects and tasks for the future. For this, 30 theses from Korean journals related to sex education for young children·elementary school students·middle school students from years 2000 to 2019 were extracted and analysis was conducted on the general trends (by research period and by academic field) of sex education and they were categorized by research topic, by research subject, and by research method. Research results showed that, with research period, research increased in the mid-2000s and with journal trends by research subject, and was published in 24 journals. Second, with regard to research topic aspects, most studies looked into 'sex education perceptions and conditions' and research dealing with 'gender concept development' and 'program development and teaching method strategies' also increased. Third, in terms of the research subjects, there were 9 papers for children, 6 papers for elementary students, 14 papers for middle school students, 2 for high school students, and 9 papers for teachers and parents. Fourth, with trends according to research methods, the quantitative research method of 'questionnaires' was used most and following were 'literary studies' and 'interviews', in that order. Reflecting these research results, discussions were presented and proposals for future studies were made.

• Journal of Korean Home Economics Education Association
• /
• v.28 no.4
• /
• pp.79-95
• /
• 2016

This study aims to explore the reality of middle school students witnessing cyberbullying and their types of behaviors after witnessing and to examine the role of empathy affecting the behaviors of bystanders of cyberbullying. For this purpose, we collected the survey data from 595 middle school students in the Gyeong-Gi region. Results show that 61.2% of the respondents report the witness of cyberbullying, Among which cyber slander is the most common, followed by spreading false information, outcast, sexual harassment, and extortion. The behaviors of bystanders who witnessed cyberbullying are categorized into spectating, defending, agreeing, or doing nothing. When it comes to the role of the students' empathy, findings show that the 'empathic concern' and 'personal pain' -, parts of emotional empathic abilities, can significantly influence behaviors of cyberbullying bystanders. These findings not only call the attention to the seriousness of cyberbullying among middle school students, but they also suggest the implication that emotion empathy education is required along with emotion control education.

• Journal of the Korean GEO-environmental Society
• /
• v.21 no.9
• /
• pp.15-24
• /
• 2020

In this study, the stress concentration ratio for the improved material of the low slump mortar grouting was evaluated through the composite ground method, the ground arching theory, the plastic angle method, the 2D and 3D numerical analysis and the 3D model experiment. The stress concentration ratio calculated by the composite ground method was 89.3, 3.75~59.0 when the three-dimensional ground arching theory was applied, and 82.8 for the three-dimensional plastic angle method. As a result of the 2D numerical analysis, the stress concentration ratio was 63.0~77.0, which was found to increase as the improvement ratio increased. The results of 3D numerical analysis were predicted to be 50.0~56.0 smaller than the results of 2D analysis. In the case of a special model experiment using a large triaxial compression cell, the stress concentration ratio for each load step was 53.0~60.0, and the stress concentration ratio evaluated by the experiment was measured within 2D and 3D numerical analysis predictions. In this study, a predictive equation for the stress concentration ratio according to the improvement ratio is proposed based on the analysis and experimental values for the improved ratio of the low slump mortar grouting.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.108-117
• /
• 2020

The purpose of this study is to analyze the blind spots of Korea's employment insurance system from a gender perspective. The data used for this study was derived from 12th (2009) and 20th (2017) years of the Korean Labor and Income Panel Studies. Logistic regression analysis was performed to analyze the causes of the blind spot. As a result, the gender gap decreased by 5% in 2017 compared to that in 2009. In the coverage of employment insurance by gender, women are more likely to join when controlling for other demographic factors. If the conditions in the labor market are the same, then women's insurance coverage is likely to be higher than that of men. The policy suggestions are as follows. The current employment insurance system has a greater impact on the labor market characteristics than the difference in the participation rate according to gender itself. The results of this study show that bridging the gender gap in the labor market is an important way of bridging the gender gap in employment insurance coverage. In the short term, the social insurance subsidy program may be effective, but policy efforts are fundamentally needed to improve the employment environment of women and low-wage workers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.161-169
• /
• 2020

This study investigated the effects and relationships of various stress, school life adjustment and happiness factors among middle school and high school adolescents. The structural model group effects between boy and girl groups were also investigated. Data was employed from the 'Korean Children and Youth Well-Being Index Survey, 2018' while subjects of the analysis included 5,144 students. Based on the education statistics data, the sample was collected by probability proportional to size. Results utilizing structural equation modeling and multigroup analysis showed that first, school stress, friend stress, and look stress had significant effects on adolescent happiness. School life adjustment had positive significant effects on adolescents' happiness. Parent stress, money stress and school stress had significant effects on school life adjustment. Second, the mediating effect of school life adjustment between stress and happiness was significant with parent, school stress, and financial stress. Third, results of the multi-group analysis by level and gender showed that the structure was similar between boys and girls, with the only differences among mediating effects. Boys had significant mediating effects by school stress, and financial stress, while girls had significant mediating effects by school stress, financial stress, and parent stress. Finally, based on the results of the study, practice and policy implications were suggested to support the promotion of adolescents' happiness.

• Journal of Distribution Science
• /
• v.13 no.7
• /
• pp.41-51
• /
• 2015

Purpose - This study analyzes loading efficiency by loading pattern for package standardization and reduction of logistics costs, along with the creation of revenue for the revenue review panel (RRP) of Membership Wholesale Clubs (MWC). The study aims to identify standard dimensions that can help improve the compatibility of the pallets related to display patterns preferred by the MWC and thereby explore ways to enhance logistics efficiency between manufacturers and retailers through standardization. Research design, data, and methodology - The study investigates and analyzes the current status based on actual case examples, i.e., manufacturer A and Korea's MWC (A company, B company, and C company), and thus devises improvement measures. To achieve this, the case of manufacturer A delivering to MWC was examined, and the actual pallet display patterns for each MWC were investigated by visiting each distribution site. In this study, TOPS (Total Optimization Packaging Software, USA) was used as the tool for pallet loading efficiency simulations the maximum allowable dimension was set to 0.0mm to prevent the pallet from falling outside the parameters, and the loading efficiency was analyzed with the pallet area. In other words, the study focused on dimensions (length x width x height) according to the research purpose and thereby deduced results. Results - The analysis of pallet loading patterns showed that the most preferred loading patterns for loading efficiency according to product specification, such as pinwheel, brick, and block patterns, were used in the case of the general distribution products, but the products were configured with block patterns in most cases when delivered to MWCs. The loading efficiency by loading pattern was analyzed with respect to 104 nationally listed standard dimensions. Meanwhile, No.51 (330 × 220mm) of KS T 1002 (1,100 × 1,100mm) was found to be the dimension that could bring about an improved loading efficiency, over 90.0% simultaneously in both the T-11 and T-12 pallet systems in a loading pattern configuration with the block pattern only, and the loading efficiency simulation results also confirmed this as the standard dimension that can be commonly applied to both the T-11 pallet (90.0%) and the T-12 pallet (90.7%) systems. Conclusions - The loading efficiency simulation results by loading pattern were analyzed: For the T-11 pallet system, 17 standard dimension sizes displayed the loading efficiency of 90.0% or more as block patterns, and the loading capacity was an average of 99.0%. For the T-12 pallet system, 35 standard dimension sizes displayed the loading efficiency of more than 90% as block patterns (the average loading efficiency of 98.6%). Accordingly, this study proposes that the standard dimensions of 17 sizes with the average loading efficiency of 99.0% should be applied in the use of the T-11 pallet system, and those of 35 sizes with the average loading efficiency of 98.6% should be reviewed and applied in the use of the T-12 pallet system.

• Journal of the Korean Geosynthetics Society
• /
• v.19 no.3
• /
• pp.9-21
• /
• 2020

In this study, the design method of the combined sheet pile was considered in the coastal landfill where sandy and clayey soils are mixed, and the behavior in excavation was analyzed. It was confirmed from the elasto-plastic analysis that the predicted behavior of the temporary facilities of earth retaining differs according to the type of the combined sheet pile method (Built up, Interlocking, Welding) and the analysis method (soldier pile method, continuous wall method). In the case of sheet pile member force, the results of the continuous wall analysis method predicted the most conservative results. When the stress ratio (calculation/allowance) of each member was analyzed based on the maximum member force of the combined sheet pile method, the maximum value was obtained for bending moment in the side pile and combined stress in the case of the strut. As a result of finite element analysis, the member force of the side pile was the largest in the short-term effective stress analysis condition, while the compressive force of the strut was large in the consolidation analysis. When comparing the results of the elasto-plastic analysis and the finite element analysis, the shear force of the side pile and the axial force of the strut were greatly evaluated in the elasto-plastic analysis, and the bending moment of the side pile was the largest in the short-term effective stress condition of the finite element analysis. In addition, the displacement of the side pile was predicted to be greater in the finite element analysis than in the elasto-plastic analysis.