• School Mathematics
• /
• v.5 no.4
• /
• pp.507-520
• /
• 2003

본 연구는 실질적인 의미에서 학생들로 하여금 수학을 더 잘 이해할 수 있도록 돕기 위해 테크놀로지를 학교 교실에서 직접 활용하는 방안에 대한 연구이다. 특히 여기서는 수학을 가르치고 배우는 과정에서 가상학습체계가 주요한 도구로서 적용되었다. 내용은 무게중심을 택했고 12명의 중학생을 대상으로 현직교사가 직접 지도하였다. 학생들은 수업초기에 교사에 의해 소개되는 학생중심 학습활동에 강한 관심과 호기심을 보였고 집중력이 아주 강했다. 전통적인 수업방식과는 달리 학생들이 참여하였고 테크놀로지를 이용하여 전통적인 방식의 교실에서 할 수 없었던 수업의 시작은 학생들의 호기심을 자극하는데 충분하였다. 전반적으로 테크놀로지 환경에서의 수업을 선호하였지만 아직 전통적인 방식인 칠판과 분필을 이용한 수업을 선호한 학생들도 있었다. 새로운 변화도 좋지만 새로운 환경에 친화적이지 않거나 테크놀로지를 이용한 수업의 빠른 진행이 학생을 오히려 혼란하게 만들기도 하였다. 마지막으로 교사는 가상학습체계를 교실에서 활용함에 있어서 현 교육과정과 교과서를 크게 개혁하지 않아도 잘 준비되고 계획된 테크놀로지의 활용에 대한 잠재력을 확인할 수 있었다. 우리는 현재 테크놀로지의 보급에 비해 그 활용도가 낮다는 것을 잘 알고 있고 기타 입학시험이라는 현실이 교육과정과 학습방법의 개혁을 현실적으로 추진하는 것이 어려운 일임을 잘 알고 있다. 그래서 현 상황에서 테크놀로지의 사용을 가능하게 할 수 있는 방법을 모색하였다. 이미 보급된 테크놀로지와 교사와 학생의 테크놀로지에 대한 이해가 앞으로 그 잠재력을 갖고 있다고 확인하였다.보다 낮은 일반세균수 값을 보여주었다. 봄철 시료에 있어서 소규모 도계장은 본 냉각 후 도계과정을 제외하곤 모든 도계공정 단계에서 대규모 도계장보다 높은 일반 세균수의 측정값을 보여주었다. 봄철 시료의 냉각말기의 냉각수 일반세균수는 소규모 도계장이 대규모 도계장보다 높은 측정값을 보여주었다.주었다.다.㏖/s/$m^2$에서는 이앙후 각각 18일로 두 품종 모두 늦어, 약광은 유묘기에 분화되었던 분얼아를 휴면으로 유도할 수 있음을 시사하였다. 4. 유효경비율은 1220~220 $\mu$㏖/s/$m^2$에서 다산벼는 47~55%, 화성벼는 100~72%로 다산벼가 화성벼보다 낮았다. 이것은 다산벼는 무효분얼이 많다는 것을 시사하는 것으로 품종 육성시 유효경비율을 높여야 할 것이다.타났고, \circled2 회복상태에서, 10 lu$\chi$인 경우 서간에 1.26 $\mu\textrm{V}$, 야간에 1.59 $\mu\textrm{V}$였고, 100 lu$\chi$인 경우 서간에 2.63 $\mu\textrm{V}$ 야간에 3.65 $\mu\textrm{V}$였으며, 400 lu$\chi$인 경우 서간에 2.52 $\mu\textrm{V}$, 야간에 3.67 $\mu\textrm{V}$로 나타났다.히, 흉선, F냥, 비장 등의 림프구에 초기 세포용해성 감염을 일으키는데, B

• Korean Journal of Environmental Biology
• /
• v.26 no.4
• /
• pp.355-366
• /
• 2008

The composition and abundance of mesozooplankton were studied from the five stations on the Bulgap stream near Yeonggwang, Jeollanamdo, Korea. Mesozooplankton samples were collected bimonthly in April, July, August, October, and December 2006 and February 2007. Total 44 taxa of mesozooplankton occurred with the highest abundance (31$\sim$53,230 indiv. m$^{-3}$) in October, and the fewest (16$\sim$97 indiv. m$^{-3}$) in December. Diversity index is the highest in July (1.072) and the lowest in October (0.386). The two copepod species, Pseudodiaptomus inopinus and Macrocyclops albidus were dominant during the study periods. A brackishwater species, P. inopinus occurred in the Bulgap stream during from August 2006 to February 2007. This species was the most dominant species (53,010 indiv. m$^{-3}$) in the stations that usually have low salinities (0.1$\sim$14.0 psu). M. albidus was predominated during from April to August 2006 in the freshwater stations.

• Journal of the Korea Society for Simulation
• /
• v.33 no.2
• /
• pp.1-11
• /
• 2024

A cyber-physical system is a technology that connects the physical systems of a manufacturing environment with a cyber space to enable simulation. One of the major challenges in this technology is the seamless communication between these two environments. In complex manufacturing processes, it is crucial to adapt to various protocols of manufacturing equipment and ensure the transmission and reception of a large volume of data without delays or errors. In this study, we propose a method for constructing agent models for real-time simulation-capable cyberphysical systems. To achieve this, we design data collection units as independent agent models and effectively integrate them with existing simulation tools to develop the overall system architecture. To validate the proposed structure and ensure reliability, we conducted empirical testing by integrating various equipment from a real-world smart microfactory system to assess the data collection capabilities. The experiments involved testing data delay and data gaps related to data collection cycles. As a result, the proposed approach demonstrates flexibility by enabling the application of various internal data collection methods and accommodating different data formats and communication protocols for various equipment with relatively low communication delays. Consequently, it is expected that this approach will promote innovation in the manufacturing industry, enhance production line efficiency, and contribute to cost savings in maintenance.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.1511-1512
• /
• 2013

• Annual Conference of KIPS
• /
• 2023.11a
• /
• pp.888-889
• /
• 2023

문서를 통해 기록을 남기는 과거의 기록 방식은 현대에 이르러 블로그, 인스타그램 등 다양한 SNS를 활용하는 방식으로 변모하고 있다. SNS의 발달과 대중화는 현대인에게 일반적인 일기 작성 포맷으로 자리 잡고 있다. 증가하는 수요와 디지털 기술 혁신에 대비되는 기존의 수동적인 일기 작성 애플리케이션을 대체하기 위해 본 논문은 DALL-E2와 블록체인을 활용한 일기 작성 및 민팅 애플리케이션 구현을 제안한다. 사용자는 제안하는 애플리케이션을 통해 음성인식, 광학 문자인식을 통한 다양한 일기 작성 방식을 제공받고, 완성된 일기 이미지를 디지털 자산으로서 보존할 수 있다.

• The korean journal of orthodontics
• /
• v.16 no.1
• /
• pp.85-106
• /
• 1986

The purpose of this investigation was to know the means of the T.M.J. space and to compare spational differences in centric relation and centric occlusion by the T.M.J. Tomogram and to study the correlation between the articular eminence slope and the lingual surface slope of the maxillary central incisor by the Cephalogram in near normal occlusion subjects. These results could give contribution for the diagnosis of orthodontic treatment and T.M.J. dysfunction and the assessment of orthopedic treatment and orthognathic surgery. 44 young adults (28 men and 16 women, 21 to 27 years of age) were selected from the Dental students in Yonsei Univ. Criteria for selection was normal occlusion, no clinical signs and T.M.J. dysfunction, no history of orthodontic treatment, and no missing tooth. After submental vertex view analysis. each subject was given the T.M.J. Tomogram in centric relation and centric occlusion and the Cephalogram was given with Quint Sectograph. All data was recorded and statistically processed with the CYBER computer system. Results were analyzed: the following findings and conclusions were derived. 1. The mean value for the combined right and left anterior joint space was 2.549mm, the posterior space was 2.260mm, and superior space was 3.31mm in centric relation. The anterior space was 2.316mm, posterior space was 2.474mm, and superior space was 3.435mm in centric occlusion. 2. In the centric relation position, both condyles were placed more posterioly and superioly in their fossae than in the centric occlusion position by the spatial difference. 3. In the centric occlusion position, both condyles were more symmetrically placed in their fossae with equal anterior-posterioly rather than in the centric relation position. 4. The mean articular eminence angle was $48.19^{\circ}$ and the mean fossa height was 7.911mm. A strong positive correlation between the articular eminence angle and fossa height in T.M.J. Tomogram was found. 5. In Cephalometric analysis, there was a strong positive correlation between the articular eminence slope and the lingual surface slope of the upper central incisor to the FH plane, occlusal plane, and S-N plane. 6. There was moderate positive correlation between the S-E measurements and the fossa height, articular eminence angle, and DcGn < F-H.

• Annual Conference of KIPS
• /
• 2017.04a
• /
• pp.315-318
• /
• 2017

Nowadays, Distributed Denial of Service (DDoS) attacks have gained increasing popularity and have been a major factor in a number of massive cyber-attacks. It could easily exhaust the computing and communicating resources of a victim within a short period of time. Therefore, we have to find the method to detect and prevent the DDoS attack. Recently, there have been some researches that provide the methods to resolve above problem, but it still gets some limitations such as low performance of detecting and preventing, scope of method, most of them just use on cloud server instead of network, and the reliability in the network. In this paper, we propose solutions for (1) handling multiple DDoS attacks from multiple IP address and (2) handling the suspicious attacks in the network. For the first solution, we assume that there are multiple attacks from many sources at a times, it should be handled to avoid the conflict when we setup the preventing rule to switches. In the other, there are many attacks traffic with the low volume and same destination address. Although the traffic at each node is not much, the traffic at the destination is much more. So it is hard to detect that suspicious traffic with the sampling based method at each node, our method reroute the traffic to another server and make the analysis to check it deeply.

• Annual Conference of KIPS
• /
• 2016.04a
• /
• pp.51-54
• /
• 2016

NTB는 transparent bridge와 공통적으로 독립적인 PCI bus(PCI 또는 PCI Express bus)에 대해서 데이터 전송 경로(path)를 제공한다는 점에서 기능적으로 유사하다. 그러나, NTB와 transparent bridge 간의 가장 큰 차이점은 NTB가 사용될 경우에 bridge의 하향부분(downstream side)에 위치한 장치들은 상향부분(upstream side)에서는 보이지 않는다는 점이다. 이는 bridge의 하향부분(downstream side)에 위치한 인텔리전트(intelligent)한 제어기(예를들면 CPU를 포함하는 컴퓨터)가 자신의 downstream side에 위치하는 서브시스템 내 각종 장치들을 독립적으로 관리할 수 있다는 점이다. NTB는 또한 첫 번째 호스트(primary host)의 PCI bus로 구성된 서브시스템(subsystem) 계층구조(hierarchy)에 두 번째 호스트(secondary host)를 연결하는 데 사용될 수 있다. 이는 두 시스템간 통신을 가능하도록 하는 반면, 두 시스템을 서로 격리시키는 효과도 발생한다. 즉, NTB는 일반적으로 도어벨(doorbell)을 통해서 bridge의 다른 편에 위치한 장치에 대해서 인터럽트를 보낼 수 있으며, 또한, scratchpad 레지스터를 보유하고 있어 bridge의 양측에서 데이터를 상호 공유함으로써 interprocessor communication 할 수 있다.

• Annual Conference of KIPS
• /
• 2010.04a
• /
• pp.276-279
• /
• 2010

This paper is about a development of effective practice subject in electronic circuit textbook of industrial high school. This paper introduces generally about the practice subject in electronic circuit textbook of industrial high school of the 7th National curriculum and presents problem of current practice and makes an alternative idea that improve current practice. The contents of current electronic circuit textbook of industrial high school have variety topics and these topics are independence and separated. So students have some problems to apply of learned knowledge. Therefore, researcher improved the various electronic circuit practice in current electronic circuit text book and added new practice and manufactured a electronic circuit module based on these circuits. And researcher suggested new practice subject what useful electronic equipment that assembled module of result of electronic circuit practice of each section. When the last subjects are accomplished the students may have feel of achievement and high study effect from these practice. The practice subjects of this paper were manufactured after verification and tested it's performance by computer simulation program I hope that these new practice subjects make effective understanding and application of electronic circuit for student.

• Nuclear Engineering and Technology
• /
• v.55 no.3
• /
• pp.801-813
• /
• 2023

The events at Three Mile Island in the United States brought about fundamental changes in the ways that simulation would be used in nuclear operations. The need for research simulators was identified to scientifically study human-centered risk and make recommendations for process control system designs. This paper documents the human factors research conducted at the Human Systems and Simulation Laboratory (HSSL) since its inception in 2010 at Idaho National Laboratory. The facility's primary purposes are to provide support to utilities for system upgrades and to validate modernized control room concepts. In the last decade, however, as nuclear industry needs have evolved, so too have the purposes of the HSSL. Thus, beyond control room modernization, human factors researchers have evaluated the security of nuclear infrastructure from cyber adversaries and evaluated human-in-the-loop simulations for joint operations with an integrated hydrogen generation plant. Lastly, our review presents research using human reliability analysis techniques with data collected from HSSL-based studies and concludes with potential future directions for the HSSL, including severe accident management and advanced control room technologies.