• Toxicological Research
• /
• 제3권2호
• /
• pp.89-96
• /
• 1987

To test the efficacies of thiosulfate in cyanide poisoning with or without oxygen, after the administration of sublethal dose of potassium cyanide, serial arterial blood samples were collected during 60 minutes in 15 rabbits. Cyanide ion concentrations were measured by Conway cell microdiffusion method, and arterial oxygen tensions were also observed. Comparison of elimination constants showed that arterial blood cyanide ion concentration decreased most rapidly in the thiosulfate with oxygen-administered group. The elimination of cyanide ion by the action of thiosulfate in acutely poisoned rabbit accelerated probably due to oxygen and elimination pattern seems to occur by first-order elimination kinetics.

• 분석과학
• /
• 제14권6호
• /
• pp.540-544
• /
• 2001

Determination of cyanide ion has been studied by adsorptive stripping voltammetry using hanging mercury electrode. Cyanide ion complexed with copper ion is adsorpbed on the electrode and oxidised at the positive potential scan. Optimal conditions of CN determination were found to be ; supporting electrolyte solution ; 0.1 M NaCl of ammonium buffer at pH 10, accumulation potential; -800 mV vs Ag/AgCl, accumulation time ; 300 s, scan rate ; 50mV/s. The linear concentration of cyanide ion was observed in the range $1{\times}10^{-8}$, $1{\times}10^{-7}M$. The detection limit(n/s=3) was $0.13{\mu}g/L$($5{\times}10^{-9}M$) with 3.5% RSD.

• 대한화학회지
• /
• 제18권6호
• /
• pp.423-429
• /
• 1974

$ {\alpha}$-Cyano-$ {\beta}$-piperonylacrylic acid(CPA)에 대한 hydorogen cyanide의 진핵성 첨가 반응속도 상수를 측정하여 넓은 pH범위에서 잘 맞는 반응 속도식을 구하였다. 이 식에 의하면 pH3이하에서는 CPA에 대해 hydrogen cyanide분자의 첨가 반응이 일어나지만 pH6에서 8사이는 hydrogen cyanide가 $ {\alpha}$-cyano-$ {\beta}$-piperonyl acrylate ion에 첨가함을 알수 있고, 또 pH 3과 6사이에서는 이들 두 반응이 경쟁적으로 일어난다. 그리고 pH9이상에서는 $ {\alpha}$-cyano-$ {\beta}$-piperonyl acrylate ion에 cyanide ion이 첨가하는 반응이 일어나며 pH3에서 9까지의 모든 복잡한 반응 메카니즘도 이식으로 충분히 설명할 수 있음을 알았다.

• 분석과학
• /
• 제6권1호
• /
• pp.47-55
• /
• 1993

구리 착물을 수은 방울 전극에 흡착시키는 방법을 이용하여 음극 벗김 전압전류법으로 황화이온 존재하에서 미량의 시안화물을 효과적으로 정량할 수 있는 방법을 연구하였다. 염화칼륨과 인산염의 완충 용액(pH=7.0) 중에서 구리 이온 농도를 $1.0*10^{-3}M$로 유지하고서 석출 전위 -0.30V, 석출 시간 3.0분에서 약 500배의 황화이온이 있을 때 시안화이온의 검출 한계는 $2.0*10^{-7}M$이었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.135-139
• /
• 2001

According to the requirement of cyanide precipitation-purification technology, adopt the acidized sulfate to precipitate cyanide. Studying the influence of acidity and the dosage of sulfate on precipitation rate of impurity ion in cyanide wastewater, and, on the basis of synthetic precipitation experiments, we obtain principle process of cyanide precipitation-purification to technology.

• 한국표면공학회지
• /
• 제29권2호
• /
• pp.140-145
• /
• 1996

Silver deposits formed on copper substrates by replacement reactions show poor adhesion, and a silver film plated on such a deposit does not adhere. Silver ion makes a highly stable complex with cyanide ion, so that in a silver cyanide solution, the activity of silver ion is very small. This is one of the reasons for the universal use of cyanide baths in the industrial silver plating. However, the consideration of the difference between the values of the stability constants for bath the silver-iodide complex and the copper-iodide complex suggest that the rate of replacement deposition of silver on the copper substrate in si]ver-potassium iodide solution, could be comparatively low. To confirm this, the rate of replacement deposition of silver in both a silver-potassium iodide solution ($AgNO_3$0.10 mol/L, KI 2.00 mol/L ) and a strike silver plating bath (AgCN 0.028 mol/L, KCN 1.15 mol/L ) was estimated from the current density corresponding to the point of intersection of the anodic and the cathodic polarization curves. These estimated values were almost the same, and it is suggested that the silver-potassium iodide solution is not only a cyanide free silver plating bath capable of employing a copper substrate but a silver plating bath which requires no strike plating.

• 대한화학회지
• /
• 제17권6호
• /
• pp.411-415
• /
• 1973

Cyanide ion과 triphenylmethane dye와의 반응은 cetyltrimethyl ammonium bromide(CTABr)의 cationic micelle에 의하여 현저히 반응속도가 빨라지며 sodium lauryl sulfate(NaLS)의 anionic micelle에 의하여 반응속도가 늦어진다. 또한 CTABr존재하의 반응은 inorganic anion에 의하여 inhibition, 되며 NaLS존재하의 반응은 inorganic cation중의 몇가지, 특히 $Zn^{++},\;Cd^{++}$등에 의하여 현저하게 반응이 빨라지는 salt effect를 나타낸다. 물과 잘 혼합되는 몇가지 유기용매의 micelle catalysis에 대한 영향은 대체로 수용액 일때보다 작게 나타나서 반응속도가 늦어지거나 malachite green과의 반응에서 methanol은 수용액일때보다 반응속도가 빨라지는 특이한 solvent effect를 나타내었다.

• Environmental Engineering Research
• /
• 제11권6호
• /
• pp.318-324
• /
• 2006

The higher valence state of iron i.e., Fe(VI) was employed for the oxidation of one of an important toxic ion, cyanide in the aqueous medium. Cyanide was oxidized into cyanate, which is 1,000 times less toxic to cyanide and often accepted for its ultimate disposal. It was to be noted that Fe(VI) is a very powerful oxidizing agent and can oxidize most of the cyanide within few minutes i.e., ca 5 mins of contact. The data was obtained by the UV-Visible measurements for the Fe(VI) decomposition. The UV-Visible data was used to evaluate the overall rate constant for second order redox reaction between ferrate(VI) and cyanide. Also the pseudo first order rate constant was calculated as keeping the cyanide concentration in excess.

• 응용화학
• /
• 제16권1호
• /
• pp.25-28
• /
• 2012

A determination method of cyanide ion (CN^-) using nickel complexation reaction by continuous monitoring system. The mechanical parameters and chemical conditions of the complexation reaction were investigated prior to application of continuous monitoring system for determination of cyanide. On the optimized conditions, the calibration curve was linear over the range from 5.0×10^-6 to 1.0×10^-4 M. In this range, 2.40% of the reproducibility (RSD, n=3) was obtained. The limit of detection (3σ/s) was calculated to be 1.8×10^-6 M.

• Toxicological Research
• /
• 제29권2호
• /
• pp.143-147
• /
• 2013

Cyanogenic glycosides are HCN-producing phytotoxins; HCN is a powerful and a rapidly acting poison. It is not difficult to find plants containing these compounds in the food supply and/or in medicinal herb collections. The objective of this study was to investigate the distribution of total cyanide in nine genera (Dolichos, Ginkgo, Hordeum, Linum, Phaseolus, Prunus, Phyllostachys, Phytolacca, and Portulaca) of edible plants and the effect of the processing on cyanide concentration. Total cyanide content was measured by ion chromatography following acid hydrolysis and distillation. Kernels of Prunus genus are used medicinally, but they possess the highest level of total cyanide of up to 2259.81 $CN^-$/g dry weight. Trace amounts of cyanogenic compounds were detected in foodstuffs such as mungbeans and bamboo shoots. Currently, except for the WHO guideline for cassava, there is no global standard for the allowed amount of cyanogenic compounds in foodstuffs. However, our data emphasize the need for the guidelines if plants containing cyanogenic glycosidesare to be developed as dietary supplements.