• Journal of Forest and Environmental Science
• /
• v.38 no.4
• /
• pp.249-255
• /
• 2022

The study was conducted to establish a method for the proliferation of hybrid poplar (P. alba × P. glandulosa) clone Bongwha1, an excellent biomass species. It was found that to collect the cuttings of Bonghwa1, it was necessary to use the main stem rather than the axillary branch. Stem growth by green-wood cuttings showed a tendency to decrease as the length of the collected cuttings increased, but the survival rate was low. Therefore, modified leafy stem cutting was attempted to increase the survival rate of the cuttings. In the modified leafy stem cutting method, 4 leaves were included in the cuttings, and especially, cuttings were performed using cuttings containing 2-4 cm xylem parts. Leafy stem cutting increased root growth and the number of stems, as well as the survival rate of hybrid poplar clone Bongwha1 compared to green-wood cuttings. The root growth of the leafy stem cutting poplar was better as there was more xylem part. Using two-year-old nursery stocks, the leafy stem cutting was used to produce about 66 cuttings. This study is expected to contribute to the mass propagation of high-quality nursery stocks.

• Journal of Korean Society of Forest Science
• /
• v.1 no.1
• /
• pp.12-21
• /
• 1962

Outdoor cuttings studies on two coniferous species, pitch pine and needle fir, have been made at Suwon, Korea extending from March to early May, 1956. The purpose of these studies was to find the effects of ages of parent trees, topophysis, dilute hormone solution treatments and the time at which the cuttings were collected on the rooting response of the cuttings. On September 2, rooting results were examined. Pitch Pine (Pinus rigida) The total of 1335 cuttings were collected from 3- and 10-year old trees. The cuttings treated were planted on March 13 and April 20. 1. In the cuttings collected from 3-year-old seedlings, the best result (34 percent rooted) was obtained by treating ends of cuttings with a mixture of 50 ppm IBA and 50 ppm NAA. 2. No rooting was observed in lammas shoots. 3. The cuttings from 3-year-old seedlings gave better rooting than those from 10-year-old trees. 4. The root origins were developed from the lower part of the cutting and the cut surface. Needle fir (Abies holophylla) One hundred twenty-five cuttings were collected from a 30-year-old tree. The cuttings treated with any one of four mixed hormone solutions were planted on March 23. 1. Fifteen cuttings out of 75 cuttings from the lower half of the crown were rooted. The cuttings obtained from the upper half of the crown did not root at all. 2. The cuttings treated by the hormone solution made up of 20 ppm IAA, 20 ppm IBA, 20 ppm NAA, 20 ppm thiamine and 5 percent sucrose gave the best rooting (22 percent). 3. All roots originated from callus tissues and irregularly arranged parenchymatous tissues near the cut base.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.43 no.3
• /
• pp.184-188
• /
• 1998

Four experiments were conducted to determine growth regulators, their concentrations and treatment time, rooting medium, and plant parts for optimum seedling propagation by stem cuttings in yacon (Polymnia sonchifolia Poepp. & Endl.). NAA was the most effective on rooting, and followed by IBA 2,4-D, and IAA. Dipping the base of cuttings in 50 or 100 ppm solutions of IBA increased rooting ratios. The 100 ppm solution of IBA was 14% higher than the 50 ppm solution for rooting ratios. Rooting medium with equal volumes of clay loam and sand was the most suitable for rooting of cuttings. Cuttings with both terminal bud and the first node or cuttings with both the first and second nodes were higher in rooting ratios than cuttings with only terminal bud or the first or second nodes. Days to rooting was not affected by plant parts.

• Journal of Sericultural and Entomological Science
• /
• v.19 no.1
• /
• pp.37-38
• /
• 1977

Since 1972 a series of experiments were conducted to reveal physiological function and biological activities involved in rooting of mulberry cuttings, and the behaviour of ether extractable growth control substances in leaves and stens. Measurements were made on various mulberry varieties for respiration of cuttings, suitable size for the production of cuttings, change of rootability of cuttings with growth of cutting shoots after cutting date, rooting tests on the green beans with ether leaf extract and ether stem extract, and rooting effect of cutting by NAA treatment. (omitted)

• Korean Journal of Medicinal Crop Science
• /
• v.23 no.4
• /
• pp.271-276
• /
• 2015

This study was conducted to investigate the effect of shading degree and rooting media on the growth of Caragana sinica and Sedum middendorffianum after cutting. In C. sinica, the highest rooting rate was obtained in cuttings planted in horticultural soil (Sunshine Mix #1) and peat moss mixture (peat moss : perlite = 1 : 1, v/v) under one layer of 35% shading and in cuttings planted in kanumatsuchi soil mixture (kanumatsuchi soil : decomposition of granite = 1 : 1, v/v) under non-shading. Whereas, regardless of shading degree, most cuttings of S. middendorffianum rooted in both horticultural soil and peat moss mixture. Cuttings of C. sinica showed the highest root length, 10.4cm in kanumatsuchi soil mixture under one layer of 35% shading but the highest fresh and dry weight of roots in kanumatsuchi soil mixture under non-shading. In S. middendorffianum, the highest root length, fresh and dry weight of root were obtained in cuttings planted in horticultural soil under non-shading. With these results, we recommended that cuttings of C. sinica should be propagated in kanumatsuchi soil mixture under non-shading and cuttings of S. middendorffianum in horticultural soil under non-shading.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.18 no.2
• /
• pp.95-106
• /
• 1998

A study was made to estimate the economic level(Necon.) of mineral nitrogen and a cutting frequency for the dry matter production of reed canarygrass(Phalaris arundinacea L.) in uncultivated rice paddy during the harvested years in 1993~1995. Annual mineral nitrogen was applied at the levels of 0, 90, 180, 270 and 360 kg $ha^{-1}$ in 3 cuttings, 0, 120, 240, 360 and 480 kg $ha^{-1}$ in 4 cuttings, and 0, 150, 300, 450 and 600 kg $ha^{-1}$ in 5 cuttings, respectively. The results were summarized as follows; 1. The dry matter yields of all cutting frequencies in 1993 were significantly higher than in the other hay years. Mean dry matter yield were 14.40, 13.88 and 15.98 tons $ha^{-1}$ in 3, 4 and 5 cuttings, respectively. 2. Significantly higher matter yields were obtained as 15.37 and 15.80 tons $ha^{-1}$ at the level of 120 kg $ha^{-1}\;cut^{-1}$ in 3 and 4 cuttings, and 14.02~14.08 tons $ha^{-1}$ levels of 90~120 kg $ha^{-1}$ in 5 cuttings, respectively. 3. Higher efficiencies of dry matter production in response to mineral nitrogen application were recorded as 29.7 kg at level of 90 kg $ha^{-1}\;yr^{-1}$ in 3 cuttings, 19.6 kg at level of 240 kg $ha^{-1}\;yr^{-1}$ in 4 cuttings, and 20.1 kg at level of 150 kg $ha^{-1}\;yr^{-1}$ in 5 cuttings, respectively. 4. Significantly higher matter yields appeared as 5.02 tons $ha^{-1}$ at 2nd cut in 3 cuttings, 3.94~4.37 tons $ha^{-1}$ at 2nd and 3rd cut in 4 cuttings, and 3.81~3.58 tons $ha^{-1}$ at 2nd and 3rd cut in 5 cuttings, respectively. 5. The highest values of relative dry matter yield were 40.4% for 2nd cut in 3 cuttings, 34.9% for 3rd cut in 4 cuttings, and 31.5% for 2nd cut in 5 cuttings, respectively. 6. The estimated marginal dry matter yields(Ymar.) were 13.8~14.7 tons $ha^{-1}$ at ranges of economic N level of 228.5~291.9 kg $ha^{-1}\;yr^{-1}$ in 3 cuttings, 13.8~14.2 tons $ha^{-1}$ at ranges of 293.5~335.7 kg $ha^{-1}\;yr^{-1}$ in 4 cuttings, and 12.2~12.8 tons $ha^{-1}$ at ranges of 237.5~302.5 kg $ha^{-1}\;yr^{-1}$ in 5 cuttings, respectively. 7. Maximun dry matter yields(Ymax.) were 17.0 tons at the level of limiting N(Nmax.) of 558.9 kg $ha^{-1}\;yr^{-1}$ in 3 cuttings, 16.1 ton at level of limiting N of 531.4 kg $ha^{-1}\;yr^{-1}$ in 4 cuttings, and 13.9 ton at level of limiting N of 546.3 kg $ha^{-1}\;yr^{-1}$ in 5 cuttings, respectively. 8. Economic N level in all cuts were in the ranges of 42.6~123.8 kg $ha^{-1}$ in 3 cuttings, 27.3~144.1 kg $ha^{-1}$ in 4 cuttings, and 9.3~159.4 kg $ha^{-1}$ in 5 cuttings, respectively. 9. The proper cutting frequency for matter production of reed canarygrass was 3 cuttings during the h harvested years in 1993~1995, due mainly to the higher efficiency of N for the dry matter production.

• Journal of Ginseng Research
• /
• v.9 no.1
• /
• pp.42-53
• /
• 1985

This study was carried out to obtain the basic information about the large scale propagation of ginseng (Panax ginseng C.A. Meyer). Therefore, the stem cuttings of 1-year old ginseng, treated with various concentrations of plant growth regulators for 5 seconds (quick dipping) and 24 hours (prolonged soaking), were cultured. The root formation of stem cuttings was varied with the concentrations, kinds, and treatment methods of plant growth regulators. Besides normal-looking roots various malformed roots were observed. In the prolonged soaking method, the culture of stem cuttings, treated with 10 ppm of IBA or NAA, resulted in profuse root regeneration. And stem cuttings, in quick dipping method, treated with 2000 ppm of IBA or NAA resulted in more excellent root regeneration. In general, IBA was more vigorous for the root formation than NAA, The treatment with 50 ppm kinetin or 100 ppm BA brought good result for the retardation of senescence of stem cuttings and BA treatment was more effective than kinetin. As for the saponin content of roots derived from stem cutting culture, the roots, formed by non-treatment of growth regulators, were higher in saponin content than those formed by treatment of growth regulators.

• Korean Journal of Plant Resources
• /
• v.11 no.2
• /
• pp.157-162
• /
• 1998

This study was conducted to examine the effects of media, crown position, clone ,a nd plant growth substances upon the rootability of cuttings for the establishment of the method of mass production by cutting of Dendropanax morbifera Lev. the artifical soil mixtureof vermiculite, perlite and peatmoss (1 : 1 : 1 v/v/v) with IBA 100mg /l treatment was most effective on the rooting rate (85%) was obtained with semihardwood cuttings, which were collected early-August after the first growing seasons. The effect of crown position on rooting of cuttings were obsreved. Average percentage rooting of cuttings on crown position showed 78% , 72% and 65% in middle , upper and lower part with IBA 100mg/l treatment , respectively. Among the four treatment levels of IBA, the highest rooting rate was observed in 100mg/l IBA treatment.

• Journal of Forest and Environmental Science
• /
• v.30 no.2
• /
• pp.218-225
• /
• 2014

Studies were carried out to standardize and develop a suitable macro-propagation technology for large scale production of superior clonal stock through stem cuttings in Commiphora wightii Arnott (Bhandari), a data deficient medicinal plant of arid region. For the purpose, three experiments were conducted. The first experiment was tried to elucidate the impact of various cutting diameters (0.50-0.75 cm, 0.75-1.00 cm, 1.00-1.50 cm, and >1.50 cm) in combination with varying growing conditions (sunlight, shade house and mist chamber) on shoot sprouting and rooting without using exogenous plant growth regulators. Cutting diameter (size 0.75-1.00 cm) in mist chamber has shown maximum sprouting (90.00%) and rooting (73.33%), primary root (6.67) and secondary root (16.67) followed by 1.00-1.51 cm in mist chamber. Minimum sprouting (40.00%), rooting (33.33%), number of shoot (1.33), primary root (1.00) and number of secondary root (1.00) was recorded in cutting diameter (size >1.50 cm) in sunlight. Second experiment was performed to find out optimum growth regulator concentration of rooting hormone (100, 200, 500 and 1000 ppm) of Indole-3-acetic acid (IAA) and Indole-3-butyric Acid (IBA) on adventitious root formation on cuttings diameter (size 0.25-0.50 cm) in comparison to control. Maximum rooting percentage (93.33%) was recorded in 200 ppm followed by 500 ppm (86.66%) of IBA as compared to control, which showed only 60 per cent sprouting. Third experiment was performed with newly formed juvenile micro-cuttings treated with varying concentrations of IAA and IBA. The juvenile cuttings (size 6-10 cm, basal dia <0.25 cm) were selected as micro-cuttings. The cuttings treated with IBA (500 ppm) showed 64.30% rooting as compared to other treatments. Results of above experiments indicate that cuttings (size 0.75-1.00 cm dia) may be developed in mist chamber for better performance. While using heavier cuttings, no growth promoting hormones is required however; growth regulator 200 ppm concentration of IBA rooting hormone was observed optimum for promoting macro-propagation in stem cuttings of lower diameter class (0.25-0.50 cm).

• Journal of the Korea Organic Resources Recycling Association
• /
• v.2 no.2
• /
• pp.53-63
• /
• 1994

In order to investigate the effects of application rates of mineral N and cattle slurry on the dry matter yield of Reed canarygrass grown in different cutting frequency, was was cernpared for the efficiency of N utilization. Annual rates of mineral N and cattle slurry N of 0 (control), 90kg, 180kg, 270kg and 360kg/ha in 3 cuttings, 0, 120kg, 240kg, 360kg and 480kg/ha in 4 cuttings, and 0, 150kg, 300kg, 450kg and 600kg/ha were applied as urea and cattle slurry in 5 cuttings, respectively. The results were summarized as follows: 1. The annual dry matter yields were increased with application rates of mineral N and cattle slurry. The annual dry matter yields of mineral N obtained were 14.4 ton/ha(ranged from 10.46 ton to 16.91 ton/ha) in 3 cuttings, 13.88 ton/ha(ranged from 9.91 ton to 16.53 ton/ha) in 4 cuttings and 15.98 ton/ha(ranged from 12.0 ton to 18.25 ton/ha) in 5 cuttings. The annual dry matter yields of cattle slurry obtained were 12.14ton/ha(ranged from 8.92 ton to 11.79ton/ha) in 3 cuttings, 10.81ton/ha(ranged from 8.92 to 11.79 ton/ha) in 4 cuttings and 12.98ton/ha(ranged from 10.68 ton to 14.85ton/ha) in 5 cuttings. 2. Relative dry matter yield of cattle slurry as compared to mineral N were 84.3%, 77.9% and 81.2% in 3, 4 and 5 cuttings. 3. Average increase in dry matter production(kgDM/kgN) tended to decrease with application rates of mineral N and cattle slurry, and higher cutting frequencies. Average increase in dry matter production obtained were higher values at rates of 30kg/ha/cut in both of mineral N and cattle slurry. Average increase in dry matter production to mineral N were 23.9kg, 18.8kg and 15.2kgin 3, 4 and 5 cuttings, respectively. 4. Average increase in total nitrogen yield(kgTN/kgN) to mineral N obtained were 0.46kg at rates of 60kg/ha/cut in 3 cuttings, and 0.45kg and 0.40kg at rates of 30kg/ha/cut in 4 and 5 cuttings. 5. Average increase in dry matter production(kgDM/kgN) to cattle slurry obtained were 13.7kg and 19.5kg at rates of 30kg/ha/cut in 3 and 4 cuttings, and 9.7kg at rates of 60kg/ha/cut in 5 cuttings. 6. Average increase in total nitrogen yield(kgTN/kgN) to cattle slurry was not concern to the rates of application. Average increase in total nitrogen yield to cattle slurry obtained were 0.11kg, 0.20kg and 0.21kg in 3, 4 and 5 cuttings. 7. Relative average increase in dry matter production of cattle slurry as compared to mineral N were 33.1%, 52.1% and 50.0% in 3, 4 and 5 cuttings. Relative average increase in total nitrogen yield of cattle slurry as compared to mineral N were 28.9%, 51.3% and 55.3% in 3, 4 and 5 cuttings.