• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.15 no.1
• /
• pp.53-62
• /
• 2012

Culm cutting is very effective and convenient method for asexual propagation and even much less destructive than the other ways such as excavation of rhizomes. Despite that culm cutting is such a useful method, only few investigations for raising its efficiency have been carried out. We tried to examine the effect of different geographical populations and cutting sections on the shoot emergence, biomass production and its allocation in terms of cutting efficiency. Culms were sampled from three environmentally distinct wetlands : riparian marsh, salt marsh and montane fen and then they were cut separately into four sections from the bottom to the top part. Both factors of different population and section affected the shoot emergence together. Middle parts on the culm always showed more shoot emergence irrespective of different population. On the other hand, first section from salt marsh and fourth section from the montane fen did not exhibit any shoot emergence. Significant difference in increase of shoot emergence between different sections during investigation period was confirmed only from salt marsh population. Not only different population but also appropriate cutting section should be considered together for better efficiency in cutting of reed culms.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.34 no.3 s.116
• /
• pp.79-90
• /
• 2006

Tamarix chinenis blooms twice a you and its flowers, branches and leaves make the adjustment of tree shape. Propagation methods and growth characteristics of T. chinensis were studied in order to ascertain its potential use as one of vegetation resources for coast forestation and landscaping. The study results indicated that 1 or 2 you old hard wood cuttings showed higher rooting ratio than greenwood or semi hard wood cuttings. One to one mixture between vermiculite and pearlite appeared to be the best for bed soil, and sea sand and silt(loess) mixture was the next. Sea sand and granitic soil followed after. In terms of seasonal differences, spring cuttings showed the best rooting ratio, root number, and root length. Fall cuttings followed after spring cutting, and summer cuttings showed worst results regarding rooting ratio, root number, and root length. The best rooting promotion effects of growth regulators were observed with sea sand bed soils. There was no significant difference among growth regulators in terms of rooting and shoot growth. Low concentration below 100 ppm of growth regulators was enough for rooting promotion effect. In general, the number and mean length of roots and shoots were showed the excellent records in the sites with high rooting ratio. The study result strongly showed that T. chinensis can be considered as a suitable tree for coast forestation and landscaping because of its easy cutting propagation and rapid growth on saline lands.

• Journal of Sericultural and Entomological Science
• /
• v.39 no.2
• /
• pp.101-105
• /
• 1997

Most of the mulberry saplings in Korea have been produced by grafting. But the production of mulberry sapling by this method is very complex process and requires high level of technique and two years to produce saplings. Therefore, to develop the mulberry sapling production system by softwood cutting method which is suitable for mass production, several conditions on rooting and growth of cuttings were investigated. The rooting ability of cuttings varied according to mulberry varieties, showing the highest rooting ratio of 93.3% in cultivar of Shingwangppong. Of different soil texture as for rooting media, the clay was found to be the best; other media decreased in order as follows; sand, sand loam and vermiculite. The shading ratio by 70% with polyethylene film showed the highest rooting ratio of the cuttings. Optimum day of cutting was around 50th day after sprouting, whereas the ratio of stem thicker than 7mm at the base of saplings in diameter was highest at 44th day.

• Journal of Bio-Environment Control
• /
• v.23 no.4
• /
• pp.288-292
• /
• 2014

This study was performed to investigate the possibility of water cutting by vegetative propagation method from July to August of Clematis. To find out proper cutting length and rooting growth regulator for water cuttings production, cutting lengths of C. 'Honora' made 1 node and 2 nodes length cutting, which were soaked in NAA $0.1mg{\cdot}L^{-1}$. Rooting rate of cuttings treated by NAA $0.1mg{\cdot}L^{-1}$ was 100% irrespective of root lengths, but that of 1 node and 2 nodes untreated by NAA $0.1mg{\cdot}L^{-1}$ were very low about 30% and 19% respectively. Number of roots and roots length were also highest in NAA $0.1mg{\cdot}L^{-1}$, effects of NAA $0.1mg{\cdot}L^{-1}$ treatment were greater at 1 node cutting. Based on the results, rooting rate for I node cutting of C. 'Pairu' according to NAA (0, 0.1, 0.5, $1.0mg{\cdot}L^{-1}$) concentrations was investigated. Days to rooting were 70-74 days (about 10 weeks), which was not significantly different among the NAA concentrations. Rooting rate increased by NAA concentration. it was about 90% usually and was improved with more than NAA $0.5mg{\cdot}L^{-1}$.

• Journal of Korean Society of Forest Science
• /
• v.95 no.4
• /
• pp.393-397
• /
• 2006

Thuja koraiensis Nak. is a short and creeping evergreen shrub which reaches about 3 m in height and only occurs in the northeast China and in high mountains over the Korea. It's designated as a rare and endangered tree species in Korea and DD (data deficient) in Red List Category & Criteria of IUCN. This study was carried out to develop the propagation technique by cutting for conservation of genetic resources of T. koraiensis. The rooting responses of branch cuttings, obtained from hard (May) and semi-hard wood shots (August) to three plant growth regulators (PGRs), namely, IAA, IBA, and NAA applied at various concentrations (0, 100, 500, 1000, 2000, and 3000 mg/l) were examined in sand and mixed soil media. Percentage of rooting showed significant difference between cutting time, among kinds and among concentration of PGRs. The optimum cutting time was April to May in hardwood cutting. The application of IAA 1000 mg/l and NAA 500mg/l were effective in callus formation and rooting of cutting. Relatively, rooting of cutting of the control taken in May was above 93%.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.10
• /
• pp.1069-1077
• /
• 2015

In tunnel excavation using blast, the wire saw rock cutting method generates a discontinuity perimeter around the center cut, and thus prevents blast vibration propagation to reduce vibration and noise. Therefore, the method is expected to be easy to use and economical compared with other methods. In this paper, the cutting mechanism of wire saw in tunnel excavation is investigated. A model describing the changes in cutting depth and wire saw shape inside a rock during cutting is established and validated for this purpose. Through a simulation using the model, the important characteristics of wire saw cut are investigated, and the influences of cutting conditions, such as wire saw tension, wire saw speed, feed speed, depth, and diameter of boring, on cutting performance are also examined. A method to improve the cutting performance is proposed based on the results.

• Korean Journal of Plant Resources
• /
• v.19 no.4
• /
• pp.530-536
• /
• 2006

Hardwood cutting propagation and early growth characteristics were investigated in order to develop the method of cutting propagation and to find out growth characteristics in the low altitude for in situ and ex situ conservation of Empetrum nigrum var. japonicum K. Koch, which is typical arctic alpine plants on Mt. Halla. The growth of roots and shoots was different depending on hormone concentrations or soil conditions. The survival rate, rooting rate, root growth, number of root and shoot growth increased with treatment of 100 mg/l or 500 mg/l NAA. Consequently, optimum condition of hardwood cutting was at treatment with 100 mg/l or 500 mg/l NAA. When plantlets from hardwood cuttings were exposed to the field condition, after 7 months survival rate was 73.3% without shading while $91.1{\sim}94.4%$ at shading conditions. In the green house, however, survival rate of plantlets were $95.6{\sim}97.8%$ without shading. The growth of plantlets was different depending on sites and shading conditions. Particularly, the best growth was obtained when the plantlets were grown in shading conditions. It indicates that relative humidity and light intensity are correlated with the growth in the low altitude area.

• Journal of Korea Foresty Energy
• /
• v.23 no.1
• /
• pp.26-37
• /
• 2004

This study was to investigate the rational propagation of the Vitex rotundifolia, which is distributed as a community naturally at coastal area in Korea. The germination rate of ordinary temperature stored fruits was the highest with 67%. In the matter of the number of seedlings per fruit, 1 seed germinated fruit was the most with 40.3 % and the mean was 1.4 seedlings per fruit. The best rooting rate of both greenwood and hardwood cutting was 96.7% in the case of cuttings soaked in IBA 2500ppm for 1 minute on the Compost+Sand bed-soils. Generally the root development of cuttings was higher in the high IBA concentration with soaking in a moment than in the low IBA concentration with soaking in long time, and bed-soils mixed with sands and composts. And in the rooting rate, greenwood cutting was better about 10% than hardwood cutting of Vitex rotundifolia.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.52 no.2
• /
• pp.220-227
• /
• 2007

Sweetpotato fields in Korea are highly infected with virus and virus like diseases that greatly diminish both yield and quality as indicated by field observations and laboratory tests. In order to solve this problem, there is an urgent need to produce and mass propagate virus-free planting materials for distribution to the farmers. These experiments were conducted, firstly, to determine the most appropriate culture media, nutrient solution, and cutting intervals to maintain growth and vigor of tissue cultured plantleta as mother plants for propagation in insect-proof greenhouse. And as a labor saving method, the production efficiency of plug trays for rapid propagation of stem cuttings as a source of planting materials was likewise evaluated. Results showed that plants grown in medium B supplied with 0.5 and 1.0 strength of MS nutrients had high growth rate, and 20-day cutting interval was the best. 72-plug tray was better than 128-plug. Secondly, it was to develop a technique for the production of first-generation seed roots using hydroponics cultivation system. The yield of virus-free plants propagated in the non-insect proof and open-field cultivation was 2,402 kg/10a, 6% higher than those in the insect-proof cultivation, and the rate of virus re-infection was 18% higher compared to 3.3% with insect-proof cultivation. Lastly, it was to investigate the growth performance of virus free plants in farmers' field. Differences were existed in the yield depending on the variety used, but virus free plants showed an increase of $6{\sim}24%$ over virus infected plants.

• Korean Journal of Plant Resources
• /
• v.9 no.1
• /
• pp.71-75
• /
• 1996

Experiments were conducted to investigate the proper stem number and the propagation method of Lycium Chinense Mill. from 1993 to 1994.The results obtained were summerized as follows. The most effective propagation method was stem cutting 20cm in which flowering time was 15days earlier and dry fruit weight was 30 percent heavier(91kg/10a) than in seed propagation. The optimal diameter of cutting was 0.9cm of which dry fruit weight was 227kg/10a and 28 percent heavier compared with that of 0.5cm. stem number 5 had the best top growth and the heaviest 100 fruit weight as 13.4g. Fruit number per plant was increased as 864 in stem number 5. Dry fruit yield of stem number 5 was 104kg/10a and 16 percent increased compared with that of control.