• Tribology and Lubricants
• /
• v.24 no.6
• /
• pp.332-337
• /
• 2008

This paper presents the surface defect analysis based on the experimental investigation of scribed glasses. The scribing process by a diamond wheel cutter is widely used as a reliable and inexpensive method for sizing of glass sheets. The wheel cutter generates a small median crack on the glass surface, which is then propagated through the glass thickness for complete separation. The surface contour patterns in which are formed during a scribing process are strongly related to wheel cutter parameters such as wheel tip surface finish, tip angle and wheel diameter, and cutting process parameters such as scribing pressure, speed and tooling technique. The scribed surface of a glass sheet provides normal Wallner lines, which represent regular median cracks and crack propagation in glass thickness, and abnormal surface roughness patterns. In this experimental study, normal and abnormal surface topographic patterns are classified based on the surface defect profiles of scribed glass sheets. A normal surface of a scribed glass sheet shows regular Wallner lines with deep median cracks. But some specimens of scribed glass sheets show that abnormal surface profiles of glass sheets in two pieces are represented by a chipping, irregular surface cracks in depth, edge cracks, and combined crack defects. These surface crack patterns are strongly related to easy breakage of the scribed glass imposed by external forces. Thus the scribed glass with abnormal crack patterns should be removed during a quality control process based on the surface defect classification method as demonstrated in this study.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.2
• /
• pp.117-122
• /
• 1992

This experiment was conducted to determine tuber yield increase of Konjac by sowing time, seed tuber split method and cultural methods. Tuber yield per unit area was generally increased in early planting than conventional planting time. Tuber yield of polyethylene film mulching culture among storage methods was high, while the emergence rate of konjac for seedling plus PE mulching, and tunnel culture were prompted by 20 days, and especially seedling was to be greatly controlled due to temperature difference of the day and night at emergence. All of the cutting methods(two and four split method) were higher than conventional method because of increasing number of bulblet, accordingly, that method using seed tuber was profitable for mass propagation. Both botanical characteristics and tuber yield tend to be increased at 30 to 50 percent shading than natural condition.

• Korean Journal of Medicinal Crop Science
• /
• v.23 no.4
• /
• pp.271-276
• /
• 2015

This study was conducted to investigate the effect of shading degree and rooting media on the growth of Caragana sinica and Sedum middendorffianum after cutting. In C. sinica, the highest rooting rate was obtained in cuttings planted in horticultural soil (Sunshine Mix #1) and peat moss mixture (peat moss : perlite = 1 : 1, v/v) under one layer of 35% shading and in cuttings planted in kanumatsuchi soil mixture (kanumatsuchi soil : decomposition of granite = 1 : 1, v/v) under non-shading. Whereas, regardless of shading degree, most cuttings of S. middendorffianum rooted in both horticultural soil and peat moss mixture. Cuttings of C. sinica showed the highest root length, 10.4cm in kanumatsuchi soil mixture under one layer of 35% shading but the highest fresh and dry weight of roots in kanumatsuchi soil mixture under non-shading. In S. middendorffianum, the highest root length, fresh and dry weight of root were obtained in cuttings planted in horticultural soil under non-shading. With these results, we recommended that cuttings of C. sinica should be propagated in kanumatsuchi soil mixture under non-shading and cuttings of S. middendorffianum in horticultural soil under non-shading.

• Journal of Fashion Business
• /
• v.27 no.5
• /
• pp.78-92
• /
• 2023

Fashion trends are actively disseminated through social media, which influences both their propagation and consumption. This study explored how users perceive subversive basic fashion in social media videos, by examining the associated concepts and characteristics. In addition, the factors contributing to the style's social media dissemination were identified and its distinctive features were analyzed. Through text mining analysis, 80 keywords were selected for semantic network and CONCOR analysis. TF-IDF and N-gram results indicate that subversive basic fashion involves transformative design techniques such as cutting or layering garments, emphasizing the body with thin fabrics, and creating bold visual effects. Topic modeling suggests that this fashion forms a subculture that resists mainstream norms, seeking individuality by creatively transforming the existing garments. CONCOR analysis categorized the style into six groups: forward-thinking unconventional fashion, bold and unique style, creative reworking, item utilization and combination, pursuit of easy and convenient fashion, and contemporary sensibility. Consumer actions, linked to social media, were shown to involve easily transforming and pursuing personalized styles. Furthermore, creating new styles through the existing clothing is seen as an economic and creative activity that fosters network formation and interaction. This study is significant as it addresses language expression limitations and subjectivity issues in fashion image analysis, revealing factors contributing to content reproduction through user-perceived design concepts and social media-conveyed fashion characteristics.

• FLOWER RESEARCH JOURNAL
• /
• v.19 no.1
• /
• pp.8-14
• /
• 2011

This study was conducted to investigate the effect of age of transplants, propagated by cutting, of two cut rose (Rosa hybrida Hort.) cultivars on their subsequent growth and yield in an effort to develop an efficient cutting propagation method for domestic rose cultivars. Two cultivars used in this study were a standard type 'Pink Aurora' and a spray type 'Yellow King'. Cuttings were prepared as single node cuttings each with a five-leaflet leaf and were stuck in rockwool cubes ($5cm{\times}5cm{\times}5cm$, UR, Korea) at two different dates. Cuttings rooted for either 30 (stuck on Jan. 20, 2009) or 48 days (stuck on Jan. 2, 2009) were transplanted into a rockwool slabs ($10cm{\times}15cm{\times}100cm$, UR, Korea) on the same date, 18 Feb. 2009. Plant growth and cut flower quality were investigated for two successive harvests during the period of Jan. to July in 2009. In both cultivars, 48 days old plants showed some growth of the shoot and root before transplanting. However, in the case of 30 days old plants before transplanting no noticeable growth of the shoot and root was obserable in 'Pink Aurora', while only shoot growth, but not root growth to the bottom of the rooting medium, was observed in 'Yellow King'. This suggested cultivar-specific responses that in this experiment a spray type 'Yellow King' showed greater growth rate during the rooting stage than a standard type 'Pink Aurora'. In the measurement of growth and cut flower yield after transplanting, the 48 days old standard type 'Pink Aurora' produced greater number of cut flowers per plant than 30 days old plants, whereas their mean stem fresh weight was recorded smaller than that of the 30 days old plants. For 'Yellow King', 30 days old plants showed greater stem length, flower width, number of five-leaflet leaves per stem, stem fresh weight, and number of cut flowers per plant than 48 days old plants. Therefore, growth and yield were significantly affected by cultivar and age of the rooted cutting, and additional research is needed on the effect of age of rooted cuttings in more cultivars.

• Journal of Plant Biotechnology
• /
• v.35 no.3
• /
• pp.229-234
• /
• 2008

An efficient micropropagation was established by using axillary bud explants from two-year-old tree(Echinosphorea koreensis Nakai), which has been known as a rare and endangered species. Among various basal media tested, DKW medium was shown to be the best for axillary shoot elongation. The addition of both BA and TDZ to the medium induced 6 to 10 shoots per explant during eight weeks of culture, without showing any abnormal morphology at the shoot proliferation stage. However, high concentration of TDZ(>0.05 mg/L) appeared to cause hyperhydration on either leaf or shoot at the later developmental stage. Approximately 20% of shoots produced roots by the addition of 1.0 mg/L NAA but not by IBA($0.2{\sim}1.0$ mg/L). Ex vitro micro-cuttings were better source for root induction; up to 58.6% of the micro-cuttings rooted when 100 mg/L IBA was applied to the soil(vermiculite). More than 90% of plantlets with roots were successfully acclimatized and grew normally in the field. Therefore, we suggest that this endangered tree species can be effectively micropropagated by axillary bud culture system developed in this study.

• Journal of Bio-Environment Control
• /
• v.16 no.4
• /
• pp.388-394
• /
• 2007

To product the edible fresh shoots of Sedum sarmentosum in summer season, 4 local strains were cultivated with cutting propagation under 0, 30, 50, 70, 90% shading. Effect of shading on shoot growth, leaf chroma value, SPAD value, and bitterness were investigated at 35 days after cutting. Plant height, the number of node and leaf stem diameter in $30{\sim}90%$ shading were increased than in the control, and Pohang local strain had little-overgrowth shoot, thicker stem, a few brenches per shoot, and larger leaf compared to the other local strains. Fresh and dry weight under shading were increased than in the control, dry weight of pohang local strain was highest in 50% shading. Hunter L and b values were decreased out of proportion to higher shading rate. SPAD value in $50{\sim}90%$ shading was significantly lower than in the control. The bitterness of fresh shoot was decreased out of proportion to higher shading rate. In Summer season, producing the fresh shoot of S. sarmentosum was excellent in 50% shading, and Pohang local strain among 4 local strains was more stable and good in yield and quality under shading.

• Journal of Korean Society of Forest Science
• /
• v.83 no.2
• /
• pp.205-210
• /
• 1994

This study was conducted to develop a method of mass production by cutting of superior genotypes of Larix leptolepis and to examine the effects of ortet age, clone, crown position, and an applied plant growth substance upon the rooting of cuttings. Four different ortet ages, 2, 8, 16 and 30 years and three levels of root-promoting substances, indole butyric acid(IBA), at 1000, 2000, and 5000ppm were employed. Greenwood cuttings were taken from mother trees in late July and rooted for three months in rooting medium containing peatmoss : vermiculite : perlite(1 : 1 : 1 by volume). with temperature controlled at $20-25^{\circ}C$, humidity by intermittent misting and light by partial shading in the greenhouse. Cuttings treated with 1000ppm IBA showed highest rooting, with 80%, 71%, 52%, 25% for 2-, 8-, 16-. 30-year-old ortet, respectively. Untreated cuttings showed rooting of 52%, 48%, 36%, 20% for the ortet age of 2, 8, 16, 30 years, respectively. The average number of adventitious roots decreased with increasing ortet age from 2 to 30 years, whereas IBA treatment increased the number of roots in all ages. A variation in rooting among 20 clones tested was observed. The 4 clones, Chungnam 6, and 7 and Chonbuk 1, and 9 showed good rooting of about 67%, while Kangwon 49 showed boor rooting of 40% at 1000ppm IBA treatment. When crown position was compared, cuttings taken from middle crown showed highest rooting of 60%, while cuttings from upper crown showed lowest rooting of 53%.

• Horticultural Science & Technology
• /
• v.32 no.6
• /
• pp.906-911
• /
• 2014

A new coreopsis cultivar, 'Uridream Pink', was developed by mutation breeding using gamma-ray irradiation. Rooted cuttings of 'Uridream 01', developed at Uriseed Company, were exposed to various gray ranges of gamma-rays from a $^{60}CO$ source for 24 h in 2009 at the Korea Atomic Energy Research Institute. Using gamma-rays with the range of 10-100 Gy, a chimeric mutant with pastel pink flowers was induced at 30 Gy from 'Uridream 01', which blooms red-purple flowers (Red-purple group, 59A). Clones that produced flowers with modified pink color were separated from the chimeric mutant and fixed by more than three rounds of cutting back from 2009 to 2010. The separated mutant clones with modified pink color were found to bloom flowers with marketable color and be free of any abnormal plant characteristics. The typical color of the flowers was pastel pink (Red-purple group, 67B), and the clones were registered as 'Uridream Pink' at the Korea Seed and Variety Service (plant variety protection number: 4410). Although the size of flowers and leaves of 'Uridream Pink' are smaller than those of 'Uridream 01', the number of flowers per plant is greater. 'Uridream Pink' can be used as both a pot and a garden plant because of its long blooming period from late spring to late autumn.

• Journal of Korean Society of Forest Science
• /
• v.96 no.2
• /
• pp.170-177
• /
• 2007

The objectives of this study were to select early, late, and abundant flowering trees of black locust from domesticated and introduced cultivars, and prediction of flowering period by calculation of accumulated temperature in spring. Four cultivars (Debreceni-2, Pusztavacs, Jaszkiseri, and Rozsaszin AC) from Hungary and a cultivar from Beijing, China, were introduced, propagated by seed and planted in a seed orchard. For domesticated black locust, 63 cultivars from 10 locations throughout the country were selected and propagated by root cutting. Criteria for selection of domesticated cultivars were abundant flowering, long flowering period, or abundant nectar production with, if possible, straight stems. Accumulated temperature was calculated from data of a nearby weather station by accumulating daily maximum temperature minus 5 degree Celsius from January 1 up to the date reaching 880 degrees. Daily mean temperature was also used to calculate accumulated temperature up to the date reaching 450 degrees. The percentages of two-year and three-year-old flowering trees propagated by root cutting were higher than that of trees propagated by seeds, while four-year-old trees all flowered regardless of propagation methods. Among the domesticated cultivars, all the cultivars from Ganghwa showed abundant flowering with highest nectar production of 6.5 ul per flower, which was 100% more than other domesticated cultivars and 50% more than Debreceni-2 cultivar with highest nectar production among the introduced cultivars from Hungary. At the end of the eight years of observations, two trees of Debreceni-2 cultivars and a tree from Beijing, China were selected for early flowering trees which flowered 2 to 3 days earlier than average trees, while a tree of Debeceni-2 and three trees from Bejing were selected for late flowering trees which flowered 2 to 3 days later than average trees. It is possible to extend the flowering period of black locust by 4 to 6 days by planting early and late flowering cultivars together. Abundant flowering trees were unable to be selected due to severe damages by leaf gall midges which killed many trees and reduced the crown size of the remaining trees in the seed orchard, and which were first found in Korea in 2001 and now damaging most of the black locust forests in Korea. The prediction of flowering period by accumulated temperature indicated that black locust flowered to a peak when accumulated daily maximum temperature reached 880 degrees Celsius, and when daily mean temperature reached 450 degrees.