• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.1
• /
• pp.29-32
• /
• 1992

The effects of prostaglandins (PG) and indomethacin, a PG synthesis inhibitor, on ovulation in the perfused fowl ovary were studied. Laying hens were killed by cutting the jugular vein 18-19 h before expected ovulation of the second follicle of a clutch sequence. The cannulated ovary was dissected free and connected with a recycling perfusion apparatus. Agents to be studied for their effects on ovulation were added to the perfusion fluid. $PGF_{2{\alpha}}$ at 0.1 and 1 mg/l induced ovulation, with a success rate of 25% and 30%, respectively. The same doses of $PGE_2$ were effective at 60% and 63%, respectively. Indomethacin partially blocked gonadotrophin-induced ovulation. It is suggested that PGs may play a supportive role in the process of follicular rupture in the domestic fowl.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.2
• /
• pp.117-122
• /
• 2002

This study assesses the wear process of particle impingement erosion which is a major source of erosion among fluid power components. First, Bitter's theory was modified to simplify engineering calculations. Second, actual experiments were conducted to validate the modified equation. And the effect of concentration and size distribution of impinging particles was tested. Little deviation from the prediction of the modified equation was observed. To develop complete analytical approach to the erosion mechanism, further experimental data are required to establish a correlation with other engineering parameters.

• 유체기계공업학회:학술대회논문집
• /
• 2004.12a
• /
• pp.189-192
• /
• 2004

Utilizing pump selection softwares is becoming a new general trend in pump industries, substituting the old fashioned pump catalogs. One of the most powerful pump selection softwares is developed, which features pump performance viscosity correction function as well as pump selection based on the exact pump performance curves, NPSH warning, automatic determination of impeller diameter cutting to meet the customer's performance specification, performance simulation for the rpm and diameter variation, standard motor recommendation according to the motor standards and enclosure types and automatic pump datasheet generation for sales submission, automatic pump drawings and dimension generation for installation check and part preparation. This software provides pump distributors and customers with a quick, easy and exact pump selection, various performance curves review (system curves, performance curve of series or parallel operation) of the selected pumps.

• Journal of Drive and Control
• /
• v.15 no.3
• /
• pp.29-35
• /
• 2018

This paper presents the design of attachments for dual arms of disaster responding heavy machine. The heavy machine handles a variety of tasks such as cutting, shredding, picking and moving in unstructured environment. Despite the need for rapid response, the heavy machine has difficulty in repeatedly replacing the attachment depending on the task. Thus, we propose a method to solve this physical and functional contradiction relation by using TRIZ separation principles. Above all, the existing equipment and the required working scenarios were surveyed and summarized in order to separate the attachments functionally for right-handed, left-handed and two-handed operation. Then, we proposed the design directions and conceptual design as following: multi function type attachment A, for precise operation and various operations; grab type attachment B, for grasping irregular objects and auxiliary device for both arms to handle bulky objects.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.2
• /
• pp.468-473
• /
• 2017

This paper presents an in-process measurement system for shaft radius measurement during grinding process. This system does not require to stop the grinding process, which can enhance productivity and quality. In order to measure the radius, the system employs an eddy current sensor that can measure without any contact with the shaft. This type of sensor is very appropriate because it is insensitive to interference such as cutting fluid, coolant, contact pressure, and wear. For data analysis, the measurement system is modeled as a linearized discrete form where the states with noise are estimated by an extended Kalman filter. This system has been validated through simulations and experiments.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2001.06a
• /
• pp.15-21
• /
• 2001

This study assesses the wear process of particle impingement erosion which is a major source of erosion among fluid power components. First, Bitter's theory was modified to simplify engineering calculations. Second, actual experiments were conducted to validate the modified equation. And the effect of concentration and size distribution of impinging particles was tested. Little deviation from the prediction of the modified equation was observed. To develop an analytical approach to the erosion mechanism, further experimental data are required to establish a correlation with other engineering parameters.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.3 s.96
• /
• pp.136-144
• /
• 1999

This paper presents an in-process measurement system for shaft radius measurement during grinding process. This system does not require to stop the grinding process, which can enhance productivity and quality. In order to measure the radius, the system employs an eddy current sensor that can measure without any contact with the shaft. This type of sensor is very appropriate because it is insensitive to interference such as cutting fluid, coolant, contact pressure, and wear. For data analysis, the measurement system is modeled as a linearized discrete form where the states with noise are estimated by an extended Kalman filter. This system has been validated through simulations and experiments.

• Journal of Preventive Medicine and Public Health
• /
• v.16 no.1
• /
• pp.121-127
• /
• 1983

To identify the changes in professional services pattern after introducing the deligated system of claims review started in 1982, a university hospital under this system was examined. For comparison, claims of the hospital to Federation of Korean Medical Insurance Societies, where this system is not accepted, were reviewed. A total of 600 cases each were studied operated at the Departments of General Surgery & Orthopedic Surgery in 1981 and 1983. The results are summarized as follow: 1. Percentages of hospital charges for basic care was decreased by 10.2% and that for medical service increased by 8.4% in 1983. 2. After the introduction of the deligated review system, percentages of cutting off the claims was decreased by 12.4% for basic care and increased by 3.8% for medical services. 3. Percentage of testing liver function, and the frequency of administering high cost intravenous fluid injection, applicating Robinul as anesthetic premedication were decreased respectively after introducting the deligated services system.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.115-116
• /
• 2002

This study was carried out as one of efforts to overcome difficulties in air bearing design due to low stiffness and low damping. Hydrodynamic effects on hydrodynamic stiffness of a fluid film in a high speed air bearing with tow-row air sources are investigated. The hydrodynamic effects by the high speed over DN 1,000,000 and eccentricity of a proceeding which are not considered in conventional design of an air bearing need to be reconsidered. The hydrodynamic effects, which dominantly influence on the load capacity of air bearing, are caused mainly by proceeding speed, eccentricity, and the source positions. The two-row source arrangement in the air bearing produces quite unique hydrodynamic effects with respect to pressure distribution of the air film. Optimal arrangement of the two-row sources improves performance of an air bearing in film reaction force and loading capacity of high speed spindles. This study compares the pressure distribution by numerical simulation as a function of eccentricity of proceeding and the source positions. The air source position 1/7L form one end of an air bearing was found to be superior to source position of 1/4L. The dynamic stiffness were obtained using a two-dimensional cutting method which can directly measure the cutting reaction forces and the displacements of the spindle in two directions using a tool dynamometer and transducer sensors. Heat generation in the air film can not be negligible over the speed of DN 2,000,000. In order to analysis effects of heat generation on the characteristics of air bearing, high cooling bearing spindle and low cooling bearing spindle were tested and compared. Characteristics of the frequency response of shaft and motion of run out errors were different for the spindle. The test results show that, in the case of low cooling bearing spindle, the stiffness became smaller due to heat generation. The results, which were obtained for high speed region, may be used as a design information for spindle which can be applied to precision devices such as ultra precision grinding and ultra high speed milling.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1996.03a
• /
• pp.132-136
• /
• 1996

A Study is a experiment which is figure out to aptimum discharge cutting condition of the surfaceroughness, electric discharging speed and electro wear ratio with Ton Toff and V(voltage) as an input condition according to the current(Ip) in an electric spark machine ; 1)Electrode is utilized Cu(coper) and Graphite. 2)Work piece is used the material of carbon steel. The condition of experiment is; 1)Current is varied 0.7(A) to 50(A). 2)Pulse time(Ton) is varied 3($\mu$s) to 240($\mu$s) and also Toff is varied 7($\mu$s) to 20($\mu$s). 3)The time of electric discharging to work piece in each time is 30(min) to 60(min) 4)After the upper side of work piece was measured in radius (5${\mu}{\textrm}{m}$) of syulus analyzed the surface roughness to made the table and graph of Rmax by yielding data. 5)Electro wear ratio is; \circled1Coper was measured cx-machining and post machining but the electronic baiance. \circled2The ex-machining of graphite measured by it, the post-machining was found the data from volume specific gravity and analyzed to made its table and graph on ground the data 6)In order to keep the accuracy of voltage affected to the work piece was equipped with the A.V.R(Automatic Voltage Regulator). 7)The memory scope was sticked to the electric spark machine. 8)In order to preserve the precision of current, to get rid of the noise occured by internal resistance of electric spark machine and to force injecting for the discharge fluid, it made the fixed table for a work piece to minimize the work error by means of one's failure during the electric discharging According to above results, the surface roughness by the variation of electrodw and current was analyzed to compare KS(Korea Standards) It was decided the optimum condition of electric discharge cutting through analyzing the effect of electric discharge speed and electro wear ratio.