• Journal of the FoodService Safety
• /
• v.2 no.2
• /
• pp.59-66
• /
• 2021

The results of the inspection based on the sanitation checklist and the measurement of refrigerator/freezer temperature, illuminance, and ATP were conducted at 12 school foodservices in Daiyue-district, Taian-city, Shandong Province, China, at the same time, and the results were as follows. Five items of 'Use sterilized cutting boards', 'Use sterilized knives', 'Use worktable after sterilization', 'Use sink after sterilization', 'Sterilize the interior/exterior of the refrigerator regularly' in the checklist inspection were found not to be performed (0%). Two items of 'Disinfect hands after washing', 'Equipped with hand sterilizer' and 'Sterilize the kitchen areas regularly' were investigated as being performed only in one foodservice (8%). The average illuminance of the receiving stand were 373.08±106.35 Lux, 8% when the standard (540 Lux or higher) was complied with, the average refrigerator temperature were 7.06±0.82℃, 38.9% when the standard (-2 to 5℃) was observed 8% of cases complying with the standard (below -18℃) at -8.56±0.76℃ were investigated. As a result of ATP measurement, the surfaces of knife edge, cutting board, refrigerator door handle, worktable, and sink, which are not sterilized at all, were not suitable (accept ratio 0%), sterilized food plate (accept ratio 54.2%) and utensil for preserved food (accept ratio 75%) had a relatively high accept ratio. China's hygiene regulations should be revised in the direction of strengthening disinfection practices for facilities, equipment, and the environment, and hygiene measures such as education on disinfection and preparation of economical disinfection methods should be established.

• Korean Journal of Health Education and Promotion
• /
• v.23 no.3
• /
• pp.53-63
• /
• 2006

Objectives: The purpose of this study was to analyze the effects of microbe inspections on the hygienic improvement of school food service systems. Methods: Thirty-three school food service systems in Incheon metropolitan city participated in the study from Sep. 2004 to Apr. 2005. Major items of microbe inspections were cutting boards, knives, kitchen towels, and kitchen staff's hands. The Rodac plate and hand plate were used to measure the surface contamination level of germs such as Staphylococcus aureus, Vibrio species, Salmonella species and E. coli. Results: This study compared the results of the inspections in Sep. 2004 and Apr. 2005. The surface contamination level of Staphylococcus aureus and Vibrio species on the knives and kitchen towels had significantly improved. However, the surface contamination level of E. coli on the hands of the kitchen staff had worsened. Conclusions: This study showed that microbe inspections could control the hygienic level of the school food service systems. In the future, microbe inspections should be actively used to improve sanitary conditions in the school lunch system.

• Journal of Electrochemical Science and Technology
• /
• v.2 no.2
• /
• pp.85-90
• /
• 2011

Active oxygen species or free radicals are considered to cause extensive oxidative damage to biological macromolecules, which brings about a variety of diseases as well as aging. Electrolyzed reduced water(ERW) has been regarded as a ideal antioxidative agent in recent years. ERW is produced by passing a diluted salt solution through an electrolytic cell, within which the anode and cathode are separated by membrane. It can be produced reactive materials in ERW near the cathode during the electrolysis of water. ERW have the following advantages over other traditional cleaning agents: effective antioxidative agent, easy preparation, inexpensive, and environmentally friendly. The main advantage of ERW is its safety and antioxidative effect. ERW with strong reducing potential can be used to remove dirt and grease from items such as cutting boards and other kitchen utensils. The primary aim of this study is the activation mechanism of oxidation reduction potentials, ion conductivity, pH, and electrochemical properties with reactive materials in ERW.

• Food Science and Biotechnology
• /
• v.15 no.6
• /
• pp.920-924
• /
• 2006

The microbiological safety of foodservice facilities and side dishes in 6 elementary schools and 6 universities in the Jeolla-do region was evaluated. The micro-aerosol evaluation of foodservice facilities including the kitchen, refrigerators, and freezers showed a comparatively high level of microbial contamination. In the microbial safety evaluation of cooking utensils and appliances, the total plate counts of serving tables, cutting boards, and food plates were comparatively high, but did not reveal significant counts of coliforms, Staphylococcus aureus, and Escherichia coli were both below the general limit of microbial contamination. The microbiological safety of the cooking utensils and appliances were satisfactory. In the microbiological safety evaluation of side dishes served at these foodservice facilities, microbial counts were generally below the limit of microbial contamination.

• Journal of the Korean Dietetic Association
• /
• v.22 no.1
• /
• pp.1-12
• /
• 2016

The purpose of this current study was to examine the effects of nutrition and food safety management support by the Center for Children's Foodservice Management (CCFSM) in foodservice facilities for children in the Ulsan area. From December 2014 to July 2015, the status of nutrition practices and hygiene practices was assessed by dietitians using nutrition and hygiene practice checklists. The subjects of study were 48 institutional foodservice facilities for children. Some nutrition practice items showed significant increases in average scores of 'using CCFSM menus (P<0.001), revising menus (P<0.05), and reconfirm menus (P<0.01)' from pre-support to post-support. Regarding hygiene practices, some items between pre-support to post-support showed significant increases in average scores of 'having equipment for hand washing & disinfecting' (P<0.01), 'wearing disinfected clothing for kitchen hygienically' (P<0.05), 'proper sterilization' (P<0.05), 'recording the origin of ingredients' (P<0.01), 'use of different knives/cutting boards' (P<0.05), and 'an appropriate thawing process' (P<0.05) from pre-support to post-support. Based on the above results, we found that nutrition and hygiene management support by CCFSM in foodservice facilities for children had a positive influence on status of some nutrition and food safety practices.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.2C no.6
• /
• pp.309-313
• /
• 2002

In this paper, we have studied minimization of the kerf-width and surface burning, which occurred after the conventional singulation process of the multi-layer BGA board with copper, polyethylene and epoxy glass fiber. The high thermal energy of a pulsed Nd:YAG laser is used to cut the multi-layer board. The most considerable matter in the laser cutting of the multi-layer BGA boards is their different absorption coefficient to the laser beam and their different heat conductivity. The cut mechanism of a multi-layer BGA board using a 2$^{nd}$ harmonic Nd:YAG laser is the thermal vaporization by high temperature rise based on the Gaussian profile and copper melting point. In this experiment, we found that the sacrifice layer and Na blowing are effective in minimizing the surface burning by the reaction between oxygen in the air and the laser beam. In addition, N2 blowing reduces laser energy loss by debris and suppresses surface oxidation. Also, the beam incidence on the epoxy layer compared to polyimide was much more suitable to reduce damage to polyimide with copper wire for the multi layer BGA singulation. When the polyester double-sided tape is used as a sacrifice layer, surface carbonization becomes less. The SEM, non-contact 3D inspector and high-resolution microscope are used to measure cut line-width and surface morphology.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.873-877
• /
• 2005

The burr of micro drilling and micro cutting on thin metal film is a major obstacle to mass production for micro PCB boards in micro technologies of personal computing and telecom explosion. As the burr affects on the assembling process, it is necessary to study continuously on control or elimination of the burr. In order to get higher valued products, it is also needed to competitive techniques with the high resolution. In this paper, we studied experimentally the burr generation that when it is processed on the copper foil by laser in micro-hole machining. Unlike mechanical machining the burr produced on substrate is a resultants of melt and re-solidification of a melten metal which was heated and treated by laser. And higher laser energy increases the size of burr. Therefor in micro-drilling with laser, it is difficult to reduce the effects of burr for very thin metal sheets. We investigated the stale of the burr and analyzed the laser ablation Cu micro machining with respect to laser intensity and processing time.

• The Korean Journal of Food And Nutrition
• /
• v.34 no.1
• /
• pp.123-131
• /
• 2021

This study investigated the current status of foodservice management and the importance and performance of foodservice management according to the level of knowledge of workers. A survey was conducted between February 2015 and March 2015 for 329 foodservice workers at Community Child Centers in Chungbuk Area. Of these respondents, the majority (78.4%) of them were females. Most of them were in their 40s (40.4%) or 50s (33.4%). If the respondent's correct answer rate of knowledge was 0~50% or 51~100%, the respondent was classified into a 'Low Group (LG, n=175)' or a 'High Group (HG, n=154)'. Among a total of 14 foodservice management questions, 6 items (personal hygiene: 1 item; food material: 2 items; and food processing: 3 items) had relatively higher performance scores for workers in HG than for workers in LG. As a result of Importance-Performance analysis, 'Use different knives and cutting boards for fish, meat, and vegetables' was a variable of high importance but low performance. It was found that improvement was most urgently needed. Results of this study can be used to derive important items for improving foodservice management and policy development for foodservice workers at Community Child Centers.

• Journal of the Korean Home Economics Association
• /
• v.41 no.10 s.188
• /
• pp.101-116
• /
• 2003

The study was conducted to establish hygienic standards of salad items for pizza restaurant located in Seoul by applying HACCP system during the summer of 2000. The study measured temperature, time, pH, Aw and microbial assessments. The hygienic conditions of the kitchen and workers were on the average(1.21, 1.0 out of 3 pts.), but some improvement should be made: separate use of trash can and leftover disposal, separate use of knives and cutting boards, habits for hand washing and wearing hygienic gloves. For salad production, all procedures were peformed under food safety danger zone ($5{\~}60^{\circ}C$). The ingredients were mostly above pH 5.0 and high in Aw($0.94{\~}0.99$). Microbial assessments for salad production revealed that TPC($1.8{\times}10^3{\~}1.0{\times}10^{10}CFU/g$) and coliforms($1.5{\times}10{\~}5.2{\times}10^5 CFU/g$) exceeded the standards by Solberg et al.(TPC: $10^6CFU/g$, coliforms: $10^3CFU/g$). S. aureus was not detected but Salmonella was found in three food items(egg, macaroni and macaroni salad). Moreover, the workers' hands contained 3.1 104 CFU/g of TPC and 4.2 102 CFU/g of S. aureus requiring further remedy since it exceeded the safety standards suggested by Harrigan and McCance (500 CFU/g of TPC per $100cm^2$ and 10 CFU/g of coliforms per $100cm^2$). According to the critical control point(CCP) decision tree analysis, vegetable receiving, vegetable holding, mixing, display on coleslaw, macaroni draining, display on macaroni salad, egg peeling & cutting, apple cutting, and display on salad bar were determined as CCPs. From the findings it would be suggested that purchase of Quality materials, short holding and display time, storing food at right temperature, using sanitary cooking utensils, and improvement of workers' food handing practices are needed to ensure the safe salad production in this specific pizza restaurant.

• Journal of Food Hygiene and Safety
• /
• v.26 no.4
• /
• pp.330-335
• /
• 2011

This study was performed to determine the transfer rates of each foodborne pathogen from pork meat packaging during the processing. We analyzed the transfer rate of Listeria monocytogenes from contaminated pork meat to worker's hands (wearing polyethylene gloves, PEG; cotton gloves, CG; and bare hands), cutting boards and knives, and vice versa. Transfer rate of CG 100.00% was higher than that of bare hands 2.513% and PEG 1.511%. In particular, when wearing Co, the transfer rate from the CG to bare hands with CG was 0.08%. Also, the range of transfer rates from contaminated pork meat to cutting board and knife was 0.352-3.791%. In contrast, transfer rates from the workers' hands (with PEG/CG and bare hands) to cutting board, knife, and pork meat ranged from 0.001 to 0.141%. There was a lower transfer rate from workers' hands than from pork meat. These findings indicate that use of PEG could effectively reduce or prevent the cross-contamination compared to CG and provide important information concerning the consecutive transfer of L. monocytogenes during food processing.