• Journal of electromagnetic engineering and science
• /
• v.1 no.1
• /
• pp.73-77
• /
• 2001

We studied the fabrication of GaAs-based pseudomorphic high electron mobility transistors(PHEMT`s) for the purpose of millimeter- wave applications. To fabricate the high performance GaAs-based PHEMT`s, we performed the simulation to analyze the designed epitaxial-structures. Each unit processes, such as 0.1 m$\mu$$\Gamma$-gate lithography, silicon nitride passivation and air-bridge process were developed to achieve high performance device characteristics. The DC characteristics of the PHEMT`s were measured at a 70 $\mu$m unit gate width of 2 gate fingers, and showed a good pinch-off property ($V_p$= -1.75 V) and a drain-source saturation current density ($I_{dss}$) of 450 mA/mm. Maximum extrinsic transconductance $(g_m)$ was 363.6 mS/mm at $V_{gs}$ = -0.7 V, $V_{ds}$ = 1.5 V, and $I_{ds}$ =0.5 $I_{dss}$. The RF measurements were performed in the frequency range of 1.0~50 GHz. For this measurement, the drain and gate voltage were 1.5 V and -0.7 V, respectively. At 50 GHz, 9.2 dB of maximum stable gain (MSG) and 3.2 dB of $S_{21}$ gain were obtained, respectively. A current gain cut-off frequency $(f_T)$ of 106 GHz and a maximum frequency of oscillation $(f_{max})$ of 160 GHz were achieved from the fabricated PHEMT\\`s of 0.1 m$\mu$ gate length.h.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.26 no.2
• /
• pp.198-206
• /
• 1981

A field research was conducted to evaluate the effects of inoculation of Rhizobium meliloti and lime application on the early growth of alfalfa, var. Luna, in an acid soil. Alfalfa seeds were inoculated by lime-peat pelleting method with $A_3$ strain isolated from alfalfa roots. Both inoculated and noninoculated seeds were sown in acid soil (pH 5.5) with three levels of lime application (1, 3, 6 ton/ha) on mid-April. Inoculated seeds produced many effective nodules in early stage and increased nitrogen and chlorophyll contents of leaf, consequently stimulating alfalfa growth. Pseudo nodules were found in noninoculated, while they were seldom formed in inoculated. Lime application increased soil pH, plant height, root length, and shoot and root weight. Liming effect on nodulation was significant at first cut, but no longer after then. Both inoculation and liming increased the forage yield of alfalfa. Inoculation and liming of 6 ton/ha together produced the highest yield. As compared to control plot of nitrogen application, the effect of seed inoculation only could be equal to about 120 kg/ha nitrogen application. The total nitrogen contents of forage were little affected by number or weight of nodules and amounts of lime application.

• FLOWER RESEARCH JOURNAL
• /
• v.19 no.3
• /
• pp.172-176
• /
• 2011

A new spray chrysanthemum (Dendranthema grandiflorum) cultivar, 'Magic Yellow' was developed from a cross between 'Artist pink' and 'S03-47' by selection of seedlings and lines at the Flower Research Institute, Gyeongnam Agricultural Research and Extension Services (ARES) from 2003 to 2008. Its characteristics were investigated three times from 2006 to 2008 under condition of forcing culture in spring and retarding culture in autumn. The natural flowering time of 'Magic Yellow' was October 18th, and year-round production was possible by day length treatment. This cultivar has single-type flowers in good harmony with bi-color ray floret and green center. Its flower was 6.0 cm in diameter, and it had 11.4 flowers per stem in autumn. The days to flowering under the short day treatment is about 45 days in spring season, and 'Magic Yellow' showed the vase life of 22.9 days in autumn. This cultivar was registered for the protection in 2008.

• FLOWER RESEARCH JOURNAL
• /
• v.19 no.4
• /
• pp.259-263
• /
• 2011

A new spray chrysanthemum (Dendranthema grandiflorum) cultivar, 'Dimple' was developed from a cross between 'champy' and 'SP05-135', by selection of seedlings and lines at the Flower Research Institute, Gyeongnam Agricultural Research and Extension Services (ARES) from 2005 to 2009. Its characteristics were investigated three times from 2007 to 2009 under condition of forcing culture in spring and retarding culture in autumn. The natural flowering time of 'Dimple' was October 24th, and year-round production was possible by day-length control. This cultivar has single type flowers with bright yellow ray floret and green center. The plant is very vigorous and very stable in the color of petals when it is cultivated even under high temperature condition in summer. Its flower was 4.7 cm in diameter, and it had 20.3 flowers per stem in autumn. The days to flowering under the short day treatment is about 50 in spring season, and 'Dimple' showed the vase life of 21.3 days in autumn. This cultivar was registered for the protection in 2009.

• Korean Journal of Breeding Science
• /
• v.40 no.2
• /
• pp.164-167
• /
• 2008

A rose cultivar "Haedoji" developed at the Jeollanamdo Agricultural Research and Extention Services (JARES) is a standard type with deep Red flower. From 2000, two cultivars 'Vital' and 'Cardinal' were examined for horticultural characteristics and were included in cross-combination in 2003. Cultivar 'Vital', a vigorous standard type, first preference with red flower, was used as a mother plant and cultivar 'Cardinal', a red flower standard type with light color, was used as a pollen-donor plant. seventeen six breeding lines were selected in 2004 based on flower shape, flower color and abundance of petal numbers on the first selection. two breeding lines were selected in 2004 based on powderly mildew and vigor on the second selection. For three years, from 2005 till 2007, one breeding lines were selected and examined for their productivity, and then cultivar "Haedoji" was developed because of distinctive characters such as light red color flower, upright stem, long vase-life and Resistance to the Powderly Mildew. A standard type with intermediate sized flower, cultivar "Haedoji" shows in average 9.2 cm flower diameter, 62.0 cm flower stem length, and 9.5 days vase-life. The average productivity for three years was $167.3stems{\cdot}m^{-2}$ per year and increased 2% compare to cultivar 'Tiamo' with $163.9stems{\cdot}m^{-2}$ per year.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.3
• /
• pp.44-55
• /
• 1987

In order to study the effect of sawdustboard combined with plastic chips, 0.5mm($T_1$), 1mm($T_2$), 1.4mm($T_3$) thick nylon fiber. polypropylene rope fiber(RP), and 0.23mm thick moth-proof polypropylene net fiber(NP) were cut into 0.5, 1, 2cm long plastic chips. Thereafter, sawdustboard combined with plastic chips prepared as the above and plastic non-combined sawdustboard(control) were manufactured into 3 types of one-, two-, and three layer with 5 or 10% combination level. By the discussions and results at this study, the significant conclusions of mechanical and physical properties were summarized as follows: 1. The MORs were shown in the order of 3 layer> 2 layer> 1 layer among plastic non-combined boards, and $T_3$ < $T_2$ < $T_1$ < RP (NP(5%) < NP(l0%) among plastic combined boards. In 2cm long plastic chip in 1 layer board, the highest strength through all the composition was recognized. 1 layer board showing the lower strength with 0.5cm plastic chip rendered to the bending strength improvement by 2 or 3 layer board composition. On the other hand, 2 or 3 layer combined with 1, 2cm long polypropylene net fiber chips incurred MOR's conspicuous decrease requiring optimum plastic chip combined level and consideration to combined type. 2. MOE in plastic non-combined 3 layer board exhibited sandwich construction effect by higher resin content application to surface layer in the order of 3layer>1layer>2layer with the highest stiffness of the board combined with polypropylene chip, while nylon chip-combined board had little difference from plastic non-combined board. In relevant to length and layer effect, 3 layer board combined with the 0.5cm long polypropylene net fiber chip in 5% and 10% combined level presented 34-43% and 44-76% stiffness increase against plastic non-combined board(control), respectively. Moreover, in 1 layer board, 30% stiffness increase with 10% against 5% combined level in the 1 and 2cm long polypropylene net fiber chip was obtained. 3. Stress at proportional limit(Spl) showing the fiber relationship (r: 0.81-0.97) between MOR presented in the order of 1 layer<2 layer<3 layer in plastic non-combined board. Correspondingly, combined effect by layer and plastic chip length was similar to MOR's. 4. Differently from previous properties(MOR, MOE, Spl). work to maximum load(Wml) of 2 layer board approached to that of 3 layer board. Conforming the above phenomenon. 2 layer combined with 0.5cm long polypropylene net fiber chip kept the greater work than 1 layer. The polypropylene combined board superior to nylon -and plastic non - combined board seemed to have greater anti - failing capacity. 5. Internal bond strength(IB), in contrast to MOR's tendency. showed in the order of T1

• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.5
• /
• pp.42-59
• /
• 2017

To investigate rooting and community forming ability, sod strips of Gramineae such as Miscanthus sacchariflorus (Maxim.) Benth., Miscanthus sinensis var. purpurascens(Andersson) Rendle, Imperata cylindrica var. koenigii(Retz.) Pilg., and Arundinella hirta(Thunb.) Tanaka were planted horizontally at a width of 10~15cm in October 2010 on the bank slope of Kwangju Stream in Korea. Seeds of each species were sown in April 2010 in plastic seedbeds(60cm length ${\times}$ 30cm width ${\times}$ 5cm depth) filled with 4cm of garden soil and grew until October 2010 to form rectangular sod, which then was cut into multiple strips(20cm length ${\times}$ 6cm width ${\times}$ 4cm root depth). Weeds growing on the experiment sites were removed twice a year until those four species had formed a community by 2013. Weeds were not eradicated during 2014 and 2015 to observe whether the community formation can be maintained without weed removal. t-tests on stem numbers and heights in May, July, and September were conducted between 2013 and 2014, and between 2014 and 2015. Stem numbers and heights of the four species in 2014 were significantly decreased(p<0.001) compared with those in 2013 due to weed damage to their growth in 2014. Stem numbers and heights of Miscanthus sacchariflorus(Maxim.) Benth., Miscanthus sinensis var. purpurascens(Andersson) Rendle, Imperata cylindrica var. koenigii(Retz.) Pilg. in 2015 were similar to those in 2014(p>0.05). Stem numbers and heights of Arundinella hirta(Thunb.) Tanaka in 2015, however, were significantly reduced compared with those in 2014(p<0.001) due to weed impact on its growth. After three years of weed removal, a community of each species was formed. Miscanthus sacchariflorus(Maxim.) Benth., Miscanthus sinensis var. purpurascens(Andersson) Rendle, Imperata cylindrica var. koenigii(Retz.) Pilg. were able to establish communities without any further weed removal. Arundinella hirta(Thunb.) Tanaka, however, was not able to maintain its community due to considerable damage to its growth caused by weeds even after three years of weed removal. Miscanthus sacchariflorus(Maxim.) Benth., Miscanthus sinensis var. purpurascens(Andersson) Rendle, Imperata cylindrica var. koenigii(Retz.) Pilg. are more suitable to sod strip plantings on stream bank slopes in terms of the maintenance of community formation without weed eradication. t-test on stem numbers and heights each September during the five year experiment period between sod strip planting and potted plants of the four species were conducted. Stem numbers of strip sod plantings were significantly higher(p<0.001) than those of potted one. Heights of strip sod plantings, however, were significantly lower(p<0.05) than those of the potted samples. Therefore, strip sod planting is more advantageous regarding bank slope erosion protection due to the higher number of stems.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.3
• /
• pp.212-228
• /
• 2013

Stone cultural heritages are repaired by the use of metal stiffeners. The problem is that this type of repair has been based on the experience of workers without specific guidelines and has caused various problems. This is to suggest the structural reinforcement and behavioral characteristics of metal rods to minimize the secondary damage of materials and have the specimens tested and verified to establish the guidelines on how to insert metal stiffeners. When only epoxy resin is applied to the cut surface, only 70% of the properties of the parent material are regenerated and it is required to structurally reinforce the metal stiffener for the remaining 30%. The metal rod is under the structural behavior after the brittle failure of stone material and the structural behavior does not occur when the metal stiffener is below 0.251%. When it accounts for over 0.5%, it achieves structural reinforcement, but causes secondary damage of parent materials. The appropriate ratio of metal stiffener for the stone material with the strength of $1,500kgf/cm^2$, therefore, should be between 0.283% and 0.377% of the cross section of attached surface to achieve reversible fracture and ductility behavior. In addition, it is more effective to position the stiffeners at close intervals to achieve the peak stress of metal rod against bending load and inserting the stiffener into the upper secions is not structurally supportive, but would rather cause damage of the parent material. Thus, most stiffeners should be inserted into the lower part and some into the central part to work as a stable tensile material under the load stress. The dispersion effect of metal rods was influenced by the area of reinforcing rods and unrelated to their diameter. However, it ensures stability under the load stress to increase the number of stiffeners considering the cross section adhered when working on large-scale structures. The development length is engineered based upon the diameter of stiffener using the following formula: $l_d=\frac{a_tf_y}{u{\Sigma}_0}$. Also, helically-threaded reinforcing rods should be used to perform the behaviors as a structural material.

• Journal of Fashion Business
• /
• v.3 no.4
• /
• pp.147-160
• /
• 1999

This paper is intended to compare and analyze the fashion trends that were introduced in the recent shows, held abroad and in Korea, so as to investigate how well the designers in Taegu and Kyungbuk (TK) area are keeping up with the international vogue. The research has done, analyzing Pret-a-Porter in Paris and the three events held in the TK area in 1997 -The Taegu Collection, Kyungbuk Fashion Festival and Textile & Apparel Fair and using reference pictures and documentary records. In order to investigate the trends the research is divided by four groups which are the silhouette, the detail, the color and the Fashion image and has done with the help of three postgraduate students. The results are as follows. 1. The Silhouette The slim-line has the greatest importance in the silhouette analysis of the recent collections. Like Elongated and Fit & Flare, tight-fitting and female-line were also appeared quite a lot. Compared with foreign collection, Korean collections put the bigger importance on the slim-line. 2. The Detail The printings, using paintings and plant-logos had the large portion of the accessories in both foreign and Korean collections. Draw string and wrap style were also presented a lot. Especially, at the Korean collections, layerd, corsage, and craft accent were emphasized, too. As for the necklines the similarity was found over the four events considering. Camisole neckline and halter neck were presented the most, and bared top, Vneckline, boat and low-neck which can highlight the feminity were often appeared as well. Considering collars, tailored and peaked collars which are frequently used for the jackets, were usually shown at the collections. Like convertable, shirts, wing and Italian collar, the collars that can be applied for the sports wears were presented a lot. Virtually no variation of design was found in the sleeve analysis. While set-in-sleeve and sleeveless were found commonly, not so many ornaments were added to the sleeves. The ankle and knee length for the pants and skirts were common. Furthermore, including the micro-mini, showing extremely feminine style the mini-style had the 20% portion of the skirt-length. Unbalanced lengths, using bias-cut were presented quite a lot on the runways. Deep slit skirts, wide pants and irregular hem skirts were in vogue. On the runways of Paris, more than 21% of the design was the burmuda pants. 3. The Color Red and Blue were in vogue in the four collections considering. Sometimes, yellowish was combined in Korean collections. Black and pale tone were appeared to be in fashion also with light grayish, moderate and deep tone. 4. The Fashion image As for the fashion image, feminine-decorative trend amounted to the large percentage in korean collections. At the foreign collection feminine-decorative trend and feminine trend were predominant, then mannish trend and simple trend were apeared equally. The research shows that TK area and foreign collections are fairy similar, which means that the designers in TK area have been making their efforts to satisfy the clients who have the international minds. However, compared with foreign collections, TK collections were apprered to be strongly inclined to only a few trends. Consequently the season trends are not as diverse as the foreign trends, which cannot satisfy the fashion taste of the clients in TK area. The local designers should know the tendency and the taste of the clients and make the more efforts to read local clients' mind.

• Journal of Korean Society of Forest Science
• /
• v.42 no.1
• /
• pp.1-38
• /
• 1979

The woody species of Genus Ilex which are endemic to Korea are distributed on limited area due to solely temperature factor. There is some differences according to species, however in general, the evergreen Ilex are found along southern coastal area of Korean Peninsula and near islands where the cold index does not exceed $-5^{\circ}C$. But Ilex macropoda and the variety, only deciduous ones, are grown in temperate zone of the peninsula and some islands. The list of Ilex species of Korea are as follows. Ilex cornuta Lindley et Pax., I. crenata Thunb. var. microphylla Max., I. crenata Thunb., I. rotunda Thunb., I. macropoda Miq., I. macropoda Miq. var. pseudo-macropoda Loensner, I. integra Thunb. The author surveyed the populations of Ilex species as many as possible and data of some characters such as leaf shape, spine, fruit shape, stomata density, sex ratio in natural communities, etc. are collected. Almost all the Ilex species in Korea show sporadic distribution. This means quite small sized populations isolate distantly each other eliminating the change of gene exchange in between. Particularly Ilex conuta and I. crenata show the morphological differentiation among populations as well as significant individual variation within a population. These were true with such characteristics, leaf shape, leaf dimension, leaf margin, fruit shape, spine, and stomata density. The founded are that the fruit length and the stomata density counted on the beneath surface of leaves of Ilex cornuta increased with the decrease of latitude. These are naturally closely related with the cold index values. The table shown below indicates the correlation between mean stomata density per $0.3642mm^2$ and cold index values. These relation however were not observed on Ilex crenata. The most dominated natured in relation to individual variation were outline of leaf, the number of marginal spine, the shape of leaf cross section and the degree of luster of the upper leaf surface. As shown in photos 5~7, these variations are agreed at a glance. There are reports that the development of marginal spines in some Ilex species is associated with the juvenility and topophysis. In present study, these two factors were neglected because of the intended sampling procedure. Of Ilex rotunda, population difference with the characteristics of leaf length is recognized but not for leaf width, petiole length, and fruit size. However, individual variations within a population were significantly large. In case of Ilex integra, only individual differences within population were calculated statistically for such characteristics as leaf length, leaf width, and petiole length. As to natural population, the sex ratio was 1:2 (female to male) for Ilex cornuta, and 1:1 for Ilex crenata. The tendency of more male than female in I. cornuta was agreed to other observations. Preparing the tip cutting of length 10cm, and treating with IBA, then attaching earth ball to the cut end, very successful rooting percentages were obtained. Asexual propagation has the advantages of maintaining the heterozygosity of existing varieties and overcoming the difficulties of delayed seed germination frequently encountered with Ilex species. Considering a great deal of variation in morphological traits, a good possibility of selection breeding for decorative and ornamental purposes exists. At present, these evergreen Ilex are ignored by local people as nuisance weedy shrubs. So the proper protection measures should promptly be taken.