• FLOWER RESEARCH JOURNAL
• /
• v.18 no.4
• /
• pp.238-243
• /
• 2010

This study was conducted to investigate effects of nutrient solution pH control agent and foliar spray of ethephon on the reduction of stem inside-cavity and improvement of flower quality in chrysanthemum 'Baekma'. Changes of pH in nutrient solution as affected by the kind of pH control agent showed more settled pattern in the plot of KOH treatment than in others. Plant growth and development such as cut flower length, leaf numbers, cut flower weight and petal number were the greatest in the plot of KOH. However, the size and area of stem cavity was large in KOH rather than $KHCO_3$. As changes in the absorbing patterns of mineral elements as affected by nutrient solution pH control agent in closed system, contents of total nitrate, phosphorus, potassium and calcium by $KHCO_3$ was absorbed into the plant less than KOH, so that it remained a lot of mineral element residues rather than KOH in closed system. Plant growth as affected by the foliar spray of ethephon showed growth retardation effect in the plot of solution diluted to 1 : 500 and growth promotion effect in the plot of solution diluted to 1 : 1,000 or 1 : 2,000. The number of petals was the best in the plot of foliar spray of ethephon solution diluted to 1 : 1,000 before flowering at 45 days showing 331 petals compared to control showing 302 petals. The size and area of stem cavity as affected the foliar spray of ethephon was smaller 1 mm and 7%, respectively, in the plot of solution diluted to 1 : 2,000 before flowering at 30 days than in control. Therefore, treating pH stabilization using KOH after floral initiation stage with the foliar spray of ethephon solution diluted to 1 : 2,000 before flowering at 30 days would help to reduce stem cavity size and improve flower quality in hydroponically grown chrysanthemum 'Baekma'.

• Journal of Korean Neurosurgical Society
• /
• v.64 no.1
• /
• pp.78-87
• /
• 2021

Objective : Intraoperative neurophysiological monitoring (IONM) has been widely used during spine surgery to reduce or prevent neurologic deficits, however, its application to the surgical management for cervical myelopathy remains controversial. This study aimed to assess the success rate of IONM in patients with cervical myelopathy and to investigate the factors associated with successful baseline monitoring and the effect of increasing the stimulation intensity by focusing on motor evoked potentials (MEPs). Methods : The data of 88 patients who underwent surgery for cervical myelopathy with IONM between January 2016 and June 2018 were retrospectively reviewed. The success rate of baseline MEP monitoring at the initial stimulation of 400 V was investigated. In unmonitorable cases, the stimulation intensity was increased to 999 V, and the success rate final MEP monitoring was reinvestigated. In addition, factors related to the success rate of baseline MEP monitoring were investigated using independent t-test, Wilcoxon rank-sum test, chi-squared test, and Fisher's exact probability test for statistical analysis. The factors included age, sex, body mass index, diabetes mellitus, smoking history, symptom duration, Torg-Pavlov ratio, space available for the cord (SAC), cord compression ratio (CCR), intramedullary increased signal intensity (SI) on magnetic resonance imaging, SI length, SI ratio, the Medical Research Council (MRC) grade, the preoperative modified Nurick grade and Japanese Orthopedic Association (JOA) score. Results : The overall success rate for reliable MEP response was 52.3% after increasing the stimulation intensity. No complications were observed to be associated with increased intensity. The factors related to the success rate of final MEP monitoring were found to be SAC (p<0.001), CCR (p<0.001), MRC grade (p<0.001), preoperative modified Nurick grade (p<0.001), and JOA score (p<0.001). The cut-off score for successful MEP monitoring was 5.67 mm for SAC, 47.33% for the CCR, 3 points for MRC grade, 2 points for the modified Nurick grade, and 12 points for the JOA score. Conclusion : Increasing the stimulation intensity could significantly improve the success rate of baseline MEP monitoring for unmonitorable cases at the initial stimulation in cervical myelopathy. In particular, the SAC, CCR, MRC grade, preoperative Nurick grade and JOA score may be considered as the more important related factors associated with the success rate of MEP monitoring. Therefore, the degree of preoperative neurological functional deficits and the presence of spinal cord compression on imaging could be used as new detailed criteria for the application of IONM in patients with cervical myelopathy.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.4
• /
• pp.394-404
• /
• 2006

Statement of problem: A conventional 3-unit fixed partial denture design with a pontic between two retainers is the most commonly used. However in cases where the mental nerve is in close proximity to the second premolar, a cantilever design can be considered. As such, logical and scientific evidence is lacking for the number and position of implants to be placed for partially edentulous patients, and no clear-cut set of treatment principles currently exist. Purpose : The purpose of this study was to evaluate prognosis of implant-supported fixed partial dentures and to compare changes in bone level which may rise due to the different factors. Material and method : The present study examined radiographical marginal bone loss in patients treated with implant-supported fixed partial dentures (87 prostheses supported by 227 implants) and evaluated the influence of the span of the pontic, type of the opposing dentition. Clinical complications were studied using a retrospective method. Within the limitation of this study. the following result were drawn Result, 1. Seven of a total of 227 implants restored with fixed prostheses failed, resulting in a 96.9% success rate. 2. Complications encountered during recall appointments included dissolution of temporary luting agent (17 cases), porcelain fracture (8 cases), loosened screws (5 cases), gingival recession (4 cases), and gingival enlargement (1 case). 3. Marginal bone loss, 1 year after prosthesis placement, was significant(P<0.05) in the group that underwent bone grafting, however no difference in annual resorption rate was observed afterwards. 4. Marginal bono loss, 1 year post-placement, was greater in cantilever-type prostheses than in centric pontic protheses (P<0.05). 5. Marginal bone loss was more pronounced in posterior regions compared to anterior regions (P<0.05). 6. The degree of marginal bone loss was proportional to the length of the pontic (P<0.05). Conclusion: The success rate of implant-supported fixed partial dentures, including marginal bone loss, was satisfactory in the present study. Factors influencing marginal bone loss included whether bone graft was performed, location of the pontic (s), location of the surgical area in the arch pontic span. Long-term evaluation is necessary for implant-supported fixed partial dentures, as are further studies on the relationship between functional load and the number of implants to be placed.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.2
• /
• pp.217-226
• /
• 2007

Putting score counts about 43 % of the golf score. The dominant idea of the putting motion to amateur golfers as well as to many professional golfers is a pendulum-like motion. If a golfer's putting stroke motion is a pendulum-like motion, the putting motion should be straight-back-and-through, the same backswing, downswing, and follow through length and period, and a swing with a fixed hinge joint. If the putting motions of the human are different from the pendulum motion, there could be confusion in understanding and teaching golf putting. The purpose of this study was to examine the center of rotation(COR) of the putter head to reveal whether professional golfers really putt like a pendulum. Thirteen male professional golfers were recruited for the study. Each golfers executed 10.94 m putts six times on an artificial grass mat. Putter head position data were collected through a 60 Hz three-dimensional motion analysis system and low pass filtered with cut-off frequency of 6 Hz. COR of the putter head was mathematically acquired. Each golfer's last five putting motions were considered. The results show that the COR of the putter head was neither fixed nor located inside of the golfer. The medio-lateral directional component of the COR of the putter head fluctuated in the range of 10 cm during downswing and follow through. The anterior-posterior directional component of the COR of the putter head was fixed from the beginning of the downswing through impact. Just after impact, however, it moved to the target up to 60 cm. The superior-inferior directional component of COR of the putter head moved in a superior direction with the beginning of the downswing and showed peak height just prior to impact. During the follow through, it moved back in an inferior direction. The height-normalized peak value of the COR of the putter head was $1.4{\pm}0.3$ height. Technically speaking, male professional golfers' 10.94 m putting motion is not a pendulum-like motion. The dominating idea of a pendulum-like motion in putting might come from the image of the flawless, smooth motion of a pendulum.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.8
• /
• pp.1080-1087
• /
• 2004

A trial with twenty-four newly weaned Awassi lambs (initial body weight=21.5$\pm$0.8 kg) was conducted using a 3$\times$2 factorial design to study the effect of feeding three sources of protein supplements (soybean meal (SBM), sunflower seed meal (SSM), and cottonseed meal (CSM)), either untreated or formaldehyde-treated on the growth performance and carcass traits of Awassi lambs. Lambs were randomly assigned to one of the six diets (4 lambs/treatment diet) and were individually fed for a period of 107 days. Experimental diets were isonitrogenous and isocaloric. Final live weight and average daily gain (ADG) were affected by both source of protein and formaldehyde treatment (undegradable protein). Lambs fed untreated diets had better (p<0.01) daily gain compared to those fed formaldehyde-treated diets. Similarly total feed intake per animal was significantly (p<0.05) affected by protein source and formaldehyde treatment. Formaldehyde treatment caused a significant decrease (p<0.01) in feed intake compared to lambs fed untreated diets. Feed requirement per unit of gain was not affected by formaldehyde treatment during all periods of the experiment except for the second period (the second 28 day period), whereby untreated SBM, SSM and CSM had better feed conversion ratio (FCR) than the treated groups. Source of protein had a moderate effect (p<0.10) on FCR but had a significant effect (p<0.05) on hot and cold carcass weight, digestive tract empty weight and liver weight, with lambs fed SBM having higher values than lambs fed SSM and CSM diets. Supplementation with undegradable protein had a significant effect (p<0.05) on dressing-out percentage (p<0.05), final live weight, and hot and cold carcass weight (p<0.01). The lower values pertain to lambs fed treated diets compared to lambs fed untreated diets. In general, there were no significant differences among all carcass linear dimensions, carcass cut weights and dissected loin tissue weights for both treatments (protein source and formaldehyde treatment). Supplementation with undegradable protein but not the source of protein resulted in significantly higher dissected leg total bone weight (p<0.05), tibia and femur weight (p<0.05), and femur length (p<0.01) at the same carcass weight. Results suggest that the treatment of SBM, SSM and CSM with formaldehyde did not improve efficiency of feed utilization, lamb performance or carcass traits and that the SBM diet resulted in an increase in lamb performance compared to other experimental diets.

• Journal of Nutrition and Health
• /
• v.40 no.4
• /
• pp.385-394
• /
• 2007

The purpose of this study was to determine the zinc status of preschool children in Ulsan. The study was conducted in 95 children aged 3 to 6 years by investigating the anthropometric indices and assessing the biochemical analysis. The blood was analysed to assess serum zinc and alkaline phosphatase. And a questionnaire for dietary intakes using 24-hr recall method were performed by mothers of 95 subjects. The dietary intakes of children were analysed to determine the prevalence of inadequate and excessive intakes of zinc with Dietary Reference Intakes for Koreans (KDRIs). WHL (Weight-Length Index) and Kaup index were used to define obesity. The overall prevalence of overweight and obese subjects were 14.7% and 6.3% by WHL, were 15.8% and 13.7% by Kaup index. The mean intakes of zinc by children aged 3${\sim}$5y and 6y were 5.5 ${\pm}$ 1.4 mg/d (75.7% RDA) and 6.7 ${\pm}$ 2.0 mg/d, respectively, that was the level exceeding the estimated average requirement (EAR) and the recommended intake (RI) of Korean Dietary Reference Intakes. Less than 1.3% and 7.9% of children had usual zinc intakes below EAR and RI of KDRIs, respectively. The percentages of children with intakes exceeding the tolerable upper intake level (UL) were 2.6%. The zinc nutritional status by biological assay was found that mean serum zinc and alkaline phosphatase (ALP) of total subjects were 64.0 ${\pm}$ 8.4 ${\mu}$g/dl and 72.8 ${\pm}$ 14.9 U/L, there was not a significant difference between boys and girls. The range of serum zinc level was 45${\sim}$89 ${\mu}$g/dl and children with a low serum zinc concentration by several cut-off points were 18.9${\sim}$55.8%, especially. Serum zinc level was positively correlated to the intakes of calorie, calcium, fiber, iron, zinc, zinc/kg and height (p<0.001). Serum ALP was positively correlated height, weight and WLI. The zinc intake of children aiso showed a positive correlation with height and weight. These results indicate that there were significant correlations between the zinc status and growth of preschool children. Preschool children in Ulsan have dietary zinc intakes that exceed the new DRIs. The present level of intake does not seem to pose a health problem, but if zinc intakes with fortified foods and supplements were considered, the amount of zinc consumed by children may become excessive.

• Polymer(Korea)
• /
• v.24 no.5
• /
• pp.701-712
• /
• 2000

The continuous fiber reinforced composites of GF/PA were fabricated using a pultrusion resin impregnation apparatus and cut into pellets of 6 mm length. GF/PA pellets were then melt-mixed with PP resin to prepare new types of ternary composites, GF/PA/PP. Mechanical and rheological properties of such composites revealed to be better than conventional ternary composites due to the longer average glass fibers. Measurements also showed that the mechanical properties of the composites prepared by direct injection molding were higher than those of the composites prepared by injection molding followed by extrusion. To improve adhesions of fiber surfaces and polymer matrix, PP-MAH (maleic anhydride) has been introduced in the GF/PA/PP composites as a compatibilizer. It was found that PP-MAH did indeed improve surface adhesion between fibers and polymer matrix and that, as a result, various mechanical properties were markedly enhanced. Visualization of the phase structure in the samples was done by means of SEM. The surfaces of glass fibers in GF/PA/PP composites revealed that the fibers remained to be encapsulated by PA resin. However, pre-encapsulation did not persist in GF/PA/PP/PP-MAH composites due to the improvement of surface adhesion between fibers and polymer matrix, although resin sticking to the fiber was observed.

• FLOWER RESEARCH JOURNAL
• /
• v.26 no.4
• /
• pp.195-201
• /
• 2018

The plant morphological and chromosome characteristics of 'Bonanza', 'Coral Candy' and 'Purple Crystal', a formolongi-Asiatic (FA) interspecific hybrid species bred at the National Institute of Horticultural Science, Rural Development Administration (RDA), were investigated in this study. The flowering time of these species were found to have some variation. 'Bonanza' flowers in the middle to late June (medium-late maturing cultivar), 'Coral Candy' in the mid of June (medium maturing cultivar), and 'Purple Crystal' was observed to be in early June (early maturing cultivar). The flowering direction of all three cultivars are upward facing flowers and having a weak fragrance. The height of the plants was recorded in the range between 101.0 cm ('Purple Crystal') to 142.3 cm ('Bonanza'), thus they are able to develop cut flowers with excellent stem elongation. Flower diameters of 'Bonanza' (17.1 cm) and 'Coral Candy' (16.9 cm) were classified to be large sized flowers. On the other hand, 'Purple Crystal' had a narrow flower diameter (12.3 cm) with an outer petal width of more than 4.0 cm. Leaf length was observed for 'Bonanza' (15.7 cm), 'Coral Candy' (19.7 cm), and 'Purple Crystal' (11.1 cm). Chromosome analysis was done using FISH technique. Results revealed that all three cultivars were observed as triploids (2n=3x=36). FISH analysis also showed 5S/45S rDNA of 'Bonanza', 'Coral Candy' and 'Purple Crystal' as 4/11 loci, 4/12 loci, and 4/11 loci, respectively. The results of the FISH analysis are useful as markers to distinguish cultivars, since the patterns of rDNA observed on the remaining chromosomes are significantly different except FISH patterns of chromosome #3.

• Korean Journal of Community Nutrition
• /
• v.7 no.5
• /
• pp.675-685
• /
• 2002

A study was performed to develop as a screening tool, the Simple Evaluation Questionnaire for screening Overweight Dietary Patterns in people in their 20's. We used the data from the 20 to 29 year old subjects who participated in the three surveys: the health behavior survey, the dietary habit survey and the food intake survey - as part of the National Health and Nutrition Survey of 1998. The 1,493 adults were classified into two body fatness groups, that of normal (including the underweight) , and the overweight (including the obese) on the basis of their relative body weight (RBW). When comparing general variables between the two groups, significant differences (11 variables) were found in gender, sadness/depression state, stress level, age, number of diseases, age when overweightedness started, maximum body weight, sleep length, presently a smoker, everyday smoking habits, number of alcoholic drinks in the past month, and the number of alcoholic drinks when dunk, as well as snacking frequency and fatty food consumption. There were significant differences between the two groups in the three variables of daily soup/kuk, pan fried fish/meat/poultry and cooked fish paste/ham/dried squid in terms of cooked food intake, and 11 variables of food size, cooked rice, stews, vegetables and kimchi at breakfast, panfried foods and beverage/teas at lunch, cooked rice and stews (liquid) at dinner, cooked fish paste/ham/dried squid at snacks and cooked fishpaste/ham/dried squid at snack between lunch and dinner. In terms of raw food intake, we observed significant differences (8 variables) in daily food intake and grains, grains/vegetables/fishes (shellfish) at breakfast, meat at lunch and milt at snack after dinner. After developing questions with indicators and analyzing the indicators by logistic regression analysis using 34 variables, including these 33, plus eating-out frequency, we chose 10 questions for the simple evaluation of dietary patterns for the overweight category, in order to give each one point each. Among them we assigned an additional point to one question and two points to another question. The average scores of the overweight and normal groups, as shown by the questionnaire developed, were 5.97 $\pm$ 2.36 and 7.36 $\pm$ 2.21, respectively. A score of seven points was selected as the cut-off point. We examined the sensitivity, specificity and positive predictive value of the questionnaire to the results of 49.3%,75.4% and 68.8%, respectively. The total score categorized as an overweight dietary pattern was 30.2%.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.9 no.1
• /
• pp.25-34
• /
• 1976

The purpose of the present study on the radula of Korean marine gastropods is to determine the systematic position of the species by the radula features. The radula features of 9 Families based on the observation of specimens consisting of 31 species are described briefly as follows. 1. Naticidae; Radula formula 2-1-C-1-2. Rachidian is 3-cusped. All cusps are strong and pointed. The lateral tooth is massive and strong with a huge triangula cusp. Two marginal teethare slender, long and strong. 2. Cymatidae; Radula formula 2-1-c-1-2. Fachidian, 1-cusped. Cusp is strong and acute. The basal margin is toothed with a number of small denticles. The lateral tooth is beak-like and strong with groove inside. The marginal teeth are slender and pointed. 3. Tonnidae; Radula Formula 2-1-C-1-2. Rachidian, 3 cusped. Central cusp is huge, strong and abruptly pointed. Lateral cusp is blunt and relatively small. The lateral tooth and maginal teeth are identical to that of the preceding one. 4. Muricidae; Radula formula 1-C-1. Rachidian has 3 to 5 cusps. Central cusp, long, thick, strong and pointed. Lateral cusps are rather shorter than central, thick, strong and well cut with several minute denticles along outer margin. The lateral tooth is falciform. 5. Pyrenidae; Radula formula 1-c-1 Rachidian lacks of cusp. The base is thin, narrow, small and rectangular. Lateral tooth has 2 cusps with a crescent shaped base. 6. Buccinidae; Radula formula 1-C-1. Rachidian has 3 to 7 cusps. The base is massive and broadened laterally. The lateral tooth is large-and has 2 to 4 cusps. The central cusp is the shortest, and become longer towards the each side. 7. Busyconidae ; Radula formula 1-C-1. Rachidian, 3-cusped with a massive base. All cusps are pointed and strong. Centeral cusp is rather shorter than lateral one. Lateral tooth, 2-cusped. Inner cusp short about one half the length of outer one. 8. Fasciolariidae; Radula formula 1-C-1. Rachidian, 3 to 4-cusped. Very small in size. Lateral tooth broadened laterally with about 10 thin, long, sharp cusps. 9. Volutidae ; Only the rachidian exists. Rachidian, 3-cusped. All cusps are strong and sharply pointed. Central cusp is narrower than lateral ones. Anterior basal margin is concave.