• 지질공학
• /
• 제11권1호
• /
• pp.101-113
• /
• 2001

절취암의 물량산정과 사석의 절취 효율성을 판단하기 위한 목적으로 욕망산 인근지역의 지반조사를 실시하였다. 조사지역은 경상분지 동남부의 지질구조를 지배하는 양산단층대의 말단에 위치하여 안산암질암, 유문암질암 등의 화산암류와 이를 관입하고 있는 화강암으로 구성되어 있으며, 북북동-남남서 방향의 우수향 주향이동단층에 의해 규제되고 있다. 단층들은 분포된 절리의 간격과 빈도수 그리고 절리면 압축강도에 직접적인 영향을 끼치고 있다. 절리빈도는 단층면 인접지역에서 최대치를 나타내고 단층에서 멀어짐에 따라 감소된다. 지질조사를 기초로하여 구조도를 작성하고 이를 활용한 채취물량의 산정 결과 현장의 공사에 필요한 암편의 최소 크기를 고려할 때 채취 물량은 암반(기반암)체적의 61%인 4,018,000m$^3$이며, 표토와 풍화암이 포함된 욕망산 체적의 48%에 해당된다.

• Steel and Composite Structures
• /
• 제34권2호
• /
• pp.289-297
• /
• 2020

In the present research post-buckling of a cut out plate reinforced through carbon nanotubes (CNTs) resting on an elastic foundation is studied. Material characteristics of CNTs are hypothesized to be altered within thickness orientation which are calculated according to Mori-Tanaka model. For modeling the system mathematically, first order shear deformation theory (FSDT) is applied and using energy procedure, the governing equations can be derived. With respect to Rayleigh-Ritz procedure as well as Newton-Raphson iterative scheme, the motion equations are solved and therefore, post-buckling behavior of structure will be tracked. Diverse parameters as well as their reactions on post-buckling paths focusing cut out measurement, CNT's volume fraction and agglomeration, dimension of plate and an elastic foundation are investigated. It is revealed that presence of a square cut out can affect negatively post-buckling behavior of structure. Moreover, adding nanocompsits in the matrix leads to enhancement of post-buckling response of system.

• Steel and Composite Structures
• /
• 제22권3호
• /
• pp.691-712
• /
• 2016

In this editorial, buckling analytical investigation of the nanocomposite plate with square cut out reinforced by carbon nanotubes (CNTs) surrounded by Pasternak foundation is considered. The plate is presumed has square cut out in center and resting on Pasternak foundation. CNTs are used as amplifier in plate for diverse distribution, such as uniform distribution (UD) and three patterns of functionally graded (FG) distribution types of CNTs (FG-X, FG-A and FG-O). Moreover, the effective mechanical properties of nanocomposite plate are calculated from the rule of mixture. Domain decomposition method and orthogonal polynomials are applied in order to define the shape function of nanocomposite plate with square cut out. Finally, Rayleigh-Ritz energy method is used to obtain critical buckling load of system. A detailed parametric study is conducted to explicit the effects of the dimensions of plate, length of square cut out, different distribution of CNTs, elastic medium and volume fraction of CNTs. It is found from results that increase the dimensions of plate and length of square cut out have negative impact on buckling behavior of system but considering CNTs in plate has positive influence.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2008년도 학술발표회 논문집
• /
• pp.1752-1756
• /
• 2008

A simple, accurate and efficient mesh generation technique, the cut-cell method, is able to represent an arbitrarily complex geometry. Both structured and unstructured grid meshes are used in this method. First, the numerical domain is constructed with regular Cartesian grids as a background grid and then the solid boundaries or bodies are cut out of the background Cartesian grids. As a result, some boundary cells can be contained two numerical conditions such as the flow and solid conditions, where the special treatment is needed to simulate such physical characteristics. The HLLC approximate Riemann solver, a Godunov-type finite volume method, is employed to discretize the advection terms in the governing equations. Also, the TVD-WAF method is applied on the Cartesian cut-cell grids to stabilize numerical results. Present method is validated for the rectangular dam break problems. Initially, a conventional grid is constructed with the Cartesian regular mesh only and then applied to the dam-break flow simulation. As a comparative simulation, a cut-cell grids are applied to represent the flow domain rotated with arbitrary angles. Numerical results from this study are compared with the results from the case of the Cartesian regular mesh only. A good agreement is achieved with other numerical results presented in the literature.

• Advances in nano research
• /
• 제7권6호
• /
• pp.405-417
• /
• 2019

This research is devoted to study post-buckling analysis of functionally graded carbon nanotubes reinforced composite (FG-CNTRC) micro plate with cut out subjected to magnetic field and resting on elastic medium. The basic formulation of plate is based on first order shear deformation theory (FSDT) and the material properties of FG-CNTRCs are presumed to be changed through the thickness direction, and are assumed based on rule of mixture; moreover, nonlocal Eringen's theory is applied to consider the size-dependent effect. It is considered that the system is embedded in elastic medium and subjected to longitudinal magnetic field. Energy approach, domain decomposition and Rayleigh-Ritz methods in conjunction with Newton-Raphson iterative technique are employed to trace the post-buckling paths of FG-CNTRC micro cut out plate. The influence of some important parameters such as small scale effect, cut out dimension, different types of FG distributions of CNTs, volume fraction of CNTs, aspect ratio of plate, magnitude of magnetic field, elastic medium and biaxial load on the post-buckling behavior of system are calculated. With respect to results, it is concluded that the aspect ratio and length of square cut out have negative effect on post-buckling response of micro composite plate. Furthermore, existence of CNTs in system causes improvement in the post-buckling behavior of plate and different distributions of CNTs in plate have diverse response. Meanwhile, nonlocal parameter and biaxial compression load on the plate has negative effect on post-buckling response. In addition, imposing magnetic field increases the post-buckling load of the microstructure.

• Steel and Composite Structures
• /
• 제45권5호
• /
• pp.621-640
• /
• 2022

In the present article, the vibration response of a geometrically imperfect bi-directional functionally graded plate (2D-FGP) with geometric discontinuities and micro-structural defects (porosities) has been investigated. A porosity model has been developed to incorporate the effective material properties of the bi-directional FGP which varies in two directions i.e. along the axial and transverse direction. The geometric discontinuity is also introduced in the plate in the form of a circular cut-out at the center of the plate. The structural kinematic formulation is based on the non-polynomial trigonometric higher-order shear deformation theory (HSDT). Finite element formulation is done using C° continuous Lagrangian quadrilateral four-noded element with seven degrees of freedom per node. The equations of motion have been derived using a variational approach. Convergence and validation studies have been documented to confirm the accuracy and efficiency of the present formulation. A detailed investigation study has been done to evaluate the influence of the circular cut-out, geometric imperfection, porosity inclusions, partial supports, volume fraction indexes (along with the thickness and length), and geometrical configurations on the vibration response of 2D-FGP. It is concluded that after a particular cut-out dimension, the vibration response of the 2D FGP exhibits non-monotonic behavior.

• 한국공작기계학회논문집
• /
• 제13권3호
• /
• pp.8-15
• /
• 2004

A significant error in the end milling processes is generated due to using slender tools of which the strengths are not sufficient. In order to obtain the desired machining accuracy, therefore, it is general that at first the rough cut is implemented, then the finish cut is followed. The rough cut eliminates large volume and the finish cut does the remained part. This remaining portion after the rough cut is called as the finish allowance. Larger finish allowances make it hard to get precise dimensions at a following finish cut. Smaller finish allowances are helpful for good dimension, but it sometimes is responsible for inferior surface qualities and over cuts. This study suggests a guidance for the optimum finish allowance for machining accuracy improvement, in which the rough cuts are regulated to remain the desired margins without any over cuts. Some experiments were carried out with various cutting conditions including the change of tool strengths and depth of cuts, and also extended to up millings as well as down millings.

• 화약ㆍ발파
• /
• 제33권4호
• /
• pp.1-6
• /
• 2015

본 연구에서는 3차원 레이저 스캐너를 이용하여 채광 중인 광산을 대상으로 굴진장, 여굴, 미굴 등의 요소들을 효율적으로 산정하고 평가하고자 하였다. 이를 위하여 3차원 레이저 스캐너를 활용하여 공간좌표를 기록하는 point-cloud를 획득하였고, 3차원 모델링 프로그램을 이용하여 지하 공동을 모델링 하였다. 연구결과를 통해 각 요소들을 고찰하였을 때 심발부 굴진장은 평균 2.6m, 전체는 평균 2.4m로 나타났으며, 천공장 3.8m를 기준하여 굴진율은 평균 심발부 67%, 전체 64%로 평가되었다. 또한 설계 단면을 기준으로 여굴량을 측정한 결과로 평균 좌측벽 $4.5m^3$, 우측벽 $4.5m^3$, 천반 $5m^3$, 총 $14m^3$로 측정되었으며, look-out을 기준으로 여굴량을 측정한 결과 좌측벽 $3m^3$, 우측벽 $3.1m^3$, 천반 $2.3m^3$, 총 $8.4m^3$로 측정되었다. 평균 굴착량 대비 여굴량은 설계 단면 기준 약 8%, look-out 기준 약 5%로 평가되었다.

• 한국정밀공학회지
• /
• 제21권1호
• /
• pp.61-70
• /
• 2004

Generally, ceramics are very difficult-to-cut materials because of its high strength and hardness. The machining process of ceramics can be characterized by cracking and brittle fracture. In the machining of ceramics, edge chipping and crack propagation are the principal reasons to cause surface integrity deterioration. Such phenomenon can cause not only poor dimensional and geometric accuracy, but also possible failure of the ceramic parts. Ceramics can be machined with traditional method such as grinding and polishing. However, such processes are generally cost-expensive and have low material removal rate. Thus, in this paper, to overcome these problems. BN powder, which gives good cutting property, is added for the fabrication of machinable ceramics by volume of 5,10,15,20,25 and 30%. And, mechanical properties, R-curve behavior and machining tests are carried out to evaluate the machining properties of the manufactured machinable ceramics.

• Journal of the Korean Wood Science and Technology
• /
• 제10권3호
• /
• pp.196-196
• /
• 1982

There is a heavy stocked wood volume in the forest of Kang-Won Province compared with the other forests of Korean Provinces. It mainly, however, consists of non-productive and inferior hardwoods and shrubs which grows naturally. -This naturally grown hardwood forest should be cut and reforested with more economical confierous and diciduous tree species by artificial and natural regeneration under the positive government support. This study was carried out to survey the reasonable and economical utilization measures on harvesting wood products when existing hardwood forest should be cut primarily. This is the rust report on the resources and the classification of tree species by the uses of wood growing in the hardwood forest of Kang-Won Province. According to the investigation, 321 hardwood species are growing in this forest, and 141 species of them are extremely not suitable for wood production. The usable species as fuel wood was 180, and these are able to classify into the 22 groups by the uses of wood.