• 전기학회논문지
• /
• 제56권11호
• /
• pp.1925-1929
• /
• 2007

This paper is studied on a novel Electric Safety Protection Device (ESPD) of high speed for incapable operation of Earth Leakage Circuit Breaker (ELB) and Molded_case Circuit Breaker (MCCB) using the low voltage distribution line. The major causes of electrical fire are classified to short circuit fault, overload fault, electric leakage and electric contact failure. The occurrence factor of the fire is electric arc or spark accompanied with electrical faults. Residual Current Protective Device (RCD), that is ELB and MCCB, of high sensitivity type used at low voltage wiring cuts off earth leakage and overload, but the RCD can't cut off electric arc or spark to be a major factor of electrical fire. As the RCDs which are applied low voltage distribution panel are prescribed to rated breaking time about 30[ms] (KS C 4613), the RCDs can't perceive to the periodic electric arc or spark of more short wavelength level. To be improved on such problem, this research development is proposed to a novel ESPD of high speed to trip of distribution line on electric arc or spark due to electrical fire. Some experimental results of the proposed ESPD are confirmed to the validity of the analytical results.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제10권6호
• /
• pp.68-74
• /
• 2005

고농도 비소 오염토양에 대한 fold규모 연속 토양세척공정의 적용 가능성을 평가하기 위해 경상남도 D광산 광미 혼합토양에 대하여 적용하였다. 초기 비소오염 농도는 $321\pm32 mg/kg$ dry soil 이었으며 pilot규모 실험에서 도출된 기본 운전조건을 적용한 결과, 세척된 토양의 잔류 비소농도는 2.03 mg/kg dry soil로서 $99\%$의 높은 제거효율을 나타내었다. 경제성 및 효율성을 개선하기 위하여 세척제의 농도, cut-off size, 진탕비를 조절하며 운전한 결과, 토양세척 공정 운전시 원활한 운전관리와 처리단가 등을 고려한 최적의 운전조건은 1) 각 단계의 세척제 농도 0.2M HCl-1.0M HCl-1.0M NaOH, 2) cut-off size 0.15mm(sieve $\sharp$100), 3) 진탕비 1:3으로 처리한 결과 세척된 토양의 잔류 비소농도는 2.03mg/kg이었으며 세척유출수 처리에서는 형성된 Hoc의 과포화로 인한 침전방해가 발생하지 않는 pH 6이 (33 ppb) 최적의 처리조건으로 판단되었다. 최종 배출된 청정자갈 및 토양, 티ter cake에 대하여 TCLP법을 적용한 용출실험 결과, 각각 1.04, ND, 0.07 mg/L 모두 용출비소 농도기준(5 mg/L)을 만족하며, 탈수슬러지의 함수율$(48\%)$도 폐기물관리법의 슬러지 수분함량 기준$(85\%)$을 만족하여 매립처리가 가능함을 알 수 있었다. 따라서 본 연구의 field 규모 연속 토양세척공정은 고농도 비소 오염부지의 정화를 위한 기술로 적용 가능함을 확인할 수 있었다.

• 한국안광학회지
• /
• 제6권1호
• /
• pp.125-131
• /
• 2001

시중에서 시판되고 있는 완성품 선글라스를 고가형 23개, 저가형 55개를 대상으로 비파괴식 검사를 통하여 선글라스의 품질에 대한 분석을 행하였다. 선글라스렌즈의 일반적 광학성질은 규격을 대체적으로 만족할 정도였으며, 재질면에서 HIGH-type은 glass의 비율이 그리고 LOW-type은 Acrylate의 비율이 높았다. HIGH-type의 투과색은 무채색에 근접하였으나 LOW-type은 570 nm와 485 nm를 잊는 선상에 넓게 분포되었다. 렌즈 투과색의 자극순도의 규정을 벗어난 경우는 HIGH-type에서 7%, LOW-type에서 18%였다. UV/VIS cut-off는 HIGH-type의 경우에 350 nm, 380 nm, 400 nm를 초과하는 그룹으로 대별되었으며 LOW-type에서는 350 nm 이하 영역에 있는 경우가 6%에 달하였다. erythemal UV의 투과특성에 있어서 HIGH-type의 경우에는 모두 규격을 만족시켰으나 LOW-type의 경우에는 DIN 규격에서 최대 5개의 fail을 보였다. 또한 Near UV의 투과특성은 HIGH-type의 선글라스에서 더 많은 fail을 보였다. IR 투과특성에서는 LOW-type이 HIGH-type보다 열등한 특성을 보였다. 신호등 인지도의 경우에 HIGH-type은 모두 규격을 만족시켰지만 LOW-type은 21.8%가 만족시키지 못하였다. 대비감도 시력은 L의 증가와 함께 증가하였으며, 측정 거리의 감소와 함께 높아졌다. a와 b의 변화에 따른 대비감도 시력은 a-b 교점에 근접하는 경우 높은 값을 보였다. 선글라스 렌즈의 특성은 투과색, UV, IR, 신호등 가시도, 재질, 대비감도 시력 등의 종합적인 평가에 의해서 이뤄져야 하며 한가지 규격의 획일적 적용을 지양해야 한다. 비파괴식 선글라스 렌즈의 분석에 있어서 HIGH-type의 경우가 LOW-type에 비하여 종합적인 특성이 우수하였다.

• 대한의용생체공학회:의공학회지
• /
• 제14권3호
• /
• pp.221-226
• /
• 1993

Modules of hemodiafilter were manufactured by using MC-Hp200 and RC-HP4DOA hoi low fiber membranes of Enka Co. in a unique design. The performances of she hemodiafillers were evaluated by measuring the molecular weight cut-off, ultrafiltration rate, clearance, and pressure drop across the hemodiafiter. As a whole, the performances of the RC-HP400A module were superior to those of the MC-Hp200 module. The modules prepared in thls study showed the satisfactory performances for hemodiafiltration.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1887-1891
• /
• 2008

In this paper, we dealt with a partial discharge (PD) measurement method that has been accepted as an effective and non-destructive technique to estimate insulation performance of low-voltage induction motors. The PD measurement system consists of a coupling network, a low noise amplifier, and associated electronics. A shielded box was used to reduce environmental noise. Frequency characteristic of the coupling network was estimated by a sinusoidal signal input, and the low cut-off frequency of the coupling network was 1 MHz (-3 dB). Also, we carried out a calibration test for the PD measurement system. Sensitivity of the system was of 84 m$V_{max}$/pC between stator winding and enclosure. In application test on a low-voltage three phase induction motor (5 HP), we could detect 88 pC at AC 800 $V_{max}$.

• 한국기계가공학회지
• /
• 제11권1호
• /
• pp.33-38
• /
• 2012

An experimental study was carried out to observe the characteristics of impingement of assist gas from a rectangular supersonic nozzle on kerf surface in laser machining. A micro-scale supersonic (Mach number 2.0) rectangular nozzle system was designed and fabricated for the purposes, and hot tests of the performance of the nozzle system was proceeded in the ITI corporation laboratory. For various related parameters such as laser powers, nozzle pressures and cutting speeds, the quality of the frontal view of cut edge surfaces was observed by a microscope. In the study, it was shown that the application of the present micro-rectangular supersonic nozzle in an off-axis configuration made it possible to cut a mild steel, by combinations of relatively low laser - powers, large standoff distances, and assist gas with no oxygen, which was not achieved by conventional laser cutting processes.

• 센서학회지
• /
• 제29권3호
• /
• pp.180-186
• /
• 2020

In this study, we applied edge-pulse modulation to prevent the flicker of light-emitting diode (LED) light in a visible light identification system. In the visible light transmitter, positive pulses were transmitted at the edges of the low-to-high transition points, and negative pulses were transmitted at the edges of the high-to-low transition points of the non-return-to-zero (NRZ) data waveforms. In the visible light receiver, the NRZ waveforms were regenerated by making low-to-high and high-to-low transitions at the point of the positive and negative pulses, respectively. This method has two advantages. First, it ensures that the LED light is flicker-free because the average optical power of the LED was kept constant during data transmission in the transmitter. Second, the 120 Hz optical noise from the adjacent lighting lamps was easily cut off using a simple RC-high pass filter in the receiver.

• Journal of the Korean Data and Information Science Society
• /
• 제17권2호
• /
• pp.355-366
• /
• 2006

Customer Satisfaction (CS) in Auto insurance market is the important factor which makes customer loyalty and retention increase. Recently On-line companies are threatening the existing Off-line companies with taking advantage of the low price through cut-offing the price by internet marketing. Therefore, the CS is becoming an indispensable survival strategy to the Off-line companies. Under these circumstances, this study finds out what the CS factors are in the auto insurance market, and produces levels of CS, customer loyalty and satisfaction Index of each category. The purpose of this study is to suggest the strategic improvement factor for elevating CS level and strategic direction for CS management by CS portfolio analysis based on the survey result.

• Journal of Acupuncture Research
• /
• 제32권1호
• /
• pp.109-118
• /
• 2015

Objectives : This study aimed to investigate the correlation between fear-avoidance beliefs and neck pain/neck disability caused by traffic accidents. Methods : We surveyed 52 patients who were injured in traffic accidents. The patients completed baseline measures of pain, disability, fear-avoidance beliefs according to the visual analogue scale(VAS), neck disability index(NDI) and a fear-avoidance beliefs questionnaire (FABQ). At the end of medical treatment, VAS and NDI were reassessed. In order to determine the relationship between FABQ(including its subscales), change of VAS and NDI, Pearson correlation coefficients were used. To examine the accuracy of previously reported cut-off scores, we classified the patients into low and high groups and analyzed the change of VAS and NDI. The relationship was measured by Mann-Whitney U-test and a student's T-test. Results : FABQ and its subscales(total, physical activity and work) were significantly correlated with final VAS and NDI. FABQ-T showed low significant negative correlation with change of NDI. Previously reported cut-off scores did not show a statistical significance in this study Conclusions : This study suggests that screening for fear-avoidance beliefs may be useful for identifying patients at risk of prolonged pain after traffic accidents.

• 기본간호학회지
• /
• 제13권2호
• /
• pp.190-199
• /
• 2006

Purpose: To provide basic data and to identify the risk of pressure ulcers among neurological patients in ICU. Method: The participants in the study were on 78 neurological patients in the ICU of 3 hospitals. Data were collected every other day from 24 hours after admission, for up to 40 days or until discharge. The total period of data collection was 3 months. The risk assessment scales used for pressure ulcer were the Cubbin & Jackson(1991) scale and the National Pressure Ulcer Advisory Panel(1989) skin assessment tool. Results: There was a significant relationship between having a pressure ulcers and weight, skin condition, mental status, respiration, hygiene and hemodynamic status compared to not having a pressure ulcer. The incidence rate of the pressure ulcer was 28.2%(n=22). Of these patients the mean number of hospitalization days until pressure ulcer development was 5.2 days. The most common pressure ulcer site was the coccyx(39.3%). Based on a cut-off point of 24, 9 patients with risk scores <24 on admission also showed risk score for development of pressure ulcers, 10 patients with pressure ulcer scores ${\geq}24$ were older, hospitalized for a longer time, had low serum albumin, low hemoglobin, diabetes mellitus and surgery. Conclusion: In order to make the Cubbin & Jackson risk assessment scales more useful, there is a need to determine the reliability of the upper cut-off point 24. The result also showed a need to assess other risk factors and for early identification of at-risk patients in order to provide preventive care from admission to discharge.