• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.12
• /
• pp.90-95
• /
• 2009

The application of a large power transformer into a power distribution system was inevitable due to the increase of power demand and distributed generation. However, the decrease of the power transformer‘s impedance causes the short-circuit current of the power distribution system to increase and thus, the higher short-circuit current exceeds the cut-off ratings of the protective devices such as a circuit breaker. To solve these problems, several countermeasures have been proposed to protect the power system effectively from the higher fault current and the superconducting fault current limiter (SFCL) has been expected to be the promising countermeasure. However, the current limiting effect of SFCL including its bus voltage drop compensation depends on SFCL's application location in a distributed power system. In this paper, the current limiting and the bus-voltage drop compensating characteristics of the SFCL applied into a power distribution system were studied. In addition, the quench and the recovery characteristics of the SFCLs in each location of the power distribution system were compared each other.

• Korean Journal of Optics and Photonics
• /
• v.1 no.1
• /
• pp.46-51
• /
• 1990

Laser plasma was generated by a 1GW iodine photodissociation laser ($\lambda$=1.315$\mu\textrm{m}$, E=12.7J) whose output beam was focused on a molybdenum target surface. The experiment was conducted in a vacuum chamber under 1D-sTorr and several tens of laser shooting were necessary for sufficient exposure for the PBS resist of 111m thickness. Aluminium was coated on the top of the resist by 0.1$\mu\textrm{m}$ thickness which acts as an X-ray filter to cut off the visible and the ultraviolet lights. A bio-specimen was put directly on the aluminium coated resist and located at a distance of 3 cm from the X-ray source. The replicas of a steel mesh, spider's web. and a red blood cell were obtained by this technique and were observed by Nomarski microscope and SEM. The limitation of its resolution is determined by the X-ray source size and Fresnel diffraction effect, and its theoretical prediction is well matched with the experimental results. In this experiment, a resolution better than 0.1$\mu\textrm{m}$ could be obtained. ained.

• The Korean Journal of Archival Studies
• /
• no.10
• /
• pp.226-273
• /
• 2004

The characteristics of the records management systems of the Japanese colonial government can be summarized as follows. First, the Government General adopted a "decentralized retention" of public records. The Government General did not establish its own archives for central preservation of permanent public records. Colonial agencies established its own records office and the records office managed the records its agency created. Secret records and police records were exception. They were retained by the Secretary Office of the General Affairs Division and Police Division of the Chosun Government General respectively. Second, filing systems and retention periods of the public records followed the hierarchic structure of organization. In the headquarter of the government, records were filed by a "bureau-division-activity-file" classification system and a retention period of a file was given automatically by each unit the file belonged. A closed and cut-off file was retained and arranged according to its creating unit, creating year, and retention period. The filing system was easy to use once the filing system was established well, but to make it work effectively changes in activities and organizations should be on a reflected regular basis. It had an advantageous effect that permanent records could be preserved in a unified way throughout the organization. However, it is very critical to determine the permanent records in a professional way. Selection of the permanent records should be done professionally and in a historical perspective. Otherwise, the records retained as permanent records were not the records having an enduring value. And that was not done by the colonial government. Third, classification and scheduling of records were carried out by a creating division, rather than by the Records Office, mostly from the 1920s. Compilation of the records was also done by the creating agency. It implies that the records management lacked the professionalism. In conclusion, the records management system of the Chosun Government General wes nither modern nor user oriented. It managed the records for solely administrative purpose, i.e. effective colonial rule. The legacy of the colonial records system still exists in the public records system in Korean government. One should criticize the lack of will and efforts to modernize the public records system since the establishment of the Korean government while should reflect the historical origins of the records system in Korea.

• Environmental Engineering Research
• /
• v.24 no.2
• /
• pp.263-270
• /
• 2019

Palm oil mill effluent (POME) is the largest pollutant discharged into the rivers of Malaysia. Thus UF membrane study was conducted to investigate the effect of pressure and stirring speed on performance of POME treatment and fouling of membrane. Two types of membrane polyethersulfone (PES) and regenerated cellulose (RC) with molecular weight cut-off (MWCO) 5 and 10 kDa were used in this study. Results showed that, as pressure increased, fouling increased however permeate quality improved, the best pressure was 1.0 bar, where the fouling was not too high and produce good permeate quality. As stirring speed increased, fouling reduced and permeate quality improved, however, when stirring speed increased from 600 rpm to 800 rpm, there was no significant improvement on the permeate quality. Therefore, the best condition was at 1.0 bar and 600 rpm. PES membrane with MWCO 5 kDa showed the best permeate quality, even fouling slightly higher than RC membrane. The permeate quality obtained were analyzed in term of dissolved solid, turbidity, suspended solid, biological oxygen demand ($BOD_5$) and chemical oxygen demand (COD) were 538 mg/L, 1.02 NTU, < 25 mg/L, 27.7 mg/L and 62.8 mg/L, respectively with dominant type of fouling is cake resistance. Thus, it can be concluded water reuse standard was successfully achieved in terms of $BOD_5$ and suspended solid.

• Imaging Science in Dentistry
• /
• v.49 no.2
• /
• pp.139-151
• /
• 2019

Purpose: This study was performed to investigate the effect of exposure parameters on image quality obtained using a cone-beam computed tomography (CBCT) scanner and the relationship between physical factors and clinical image quality depending on the diagnostic task. Materials and Methods: CBCT images of a SedentexCT IQ phantom and a real skull phantom were obtained under different combinations of tube voltage and tube current (Alphard 3030 CBCT scanner, 78-90 kVp and 2-8 mA). The images obtained using a SedentexCT IQ phantom were analyzed technically, and the physical factors of image noise, contrast resolution, spatial resolution, and metal artifacts were measured. The images obtained using a real skull phantom were evaluated for each diagnostic task by 6 oral and maxillofacial radiologists, and each setting was classified as acceptable or unacceptable based on those evaluations. A statistical analysis of the relationships of exposure parameters and physical factors with observer scores was conducted. Results: For periapical diagnosis and implant planning, the tube current of the acceptable images was significantly higher than that of the unacceptable images. Image noise, the contrast-to-noise ratio (CNR), the line pair chart on the Z axis, and modulation transfer function (MTF) values showed statistically significant differences between the acceptable and unacceptable image groups. The cut-off values obtained using receiver operating characteristic curves for CNR and MTF 10 were useful for determining acceptability. Conclusion: Tube current had a major influence on clinical image quality. CNR and MTF 10 were useful physical factors that showed significantly associations with clinical image quality.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.4
• /
• pp.17-24
• /
• 2011

For the purpose of cut off and ground stabilization, water glass chemical grouting method using sodium silicate has problems of weakening durability and ground water pollution because leaching was conducted when the homogel is exposed to the ground water as time elapses. The purpose of this study is to identify the effect of alkali silica sol ground injection materials, it was compared with the sodium silicate ground injection materials using water glasses. For sodium silicate and alkali silica sol by mixing each case is divided into four different specimens were made and tested. The characteristic of alkali silica sol ground injection material was analyzed by unconfined compression test and environmental impact statement of ordinary portland cement and blast furnace slag cement. Alkali silica sol specimens were made mixing A-solution and B-solution in the proportion of one on one. Through this study, alkali silica sol ground injection mixing blast furnace slag cement has excellent strength and environment-friendly.

• Sleep Medicine and Psychophysiology
• /
• v.28 no.1
• /
• pp.34-42
• /
• 2021

Objectives: This study investigated sleep quality in female full-time homemakers and evaluated the relationship of sleep disturbance with psychological and socio-environmental factors. Methods: This cross-sectional study adopted a structured survey and sequential recruitment method for randomized participation of community-dwelling full-time female homemakers. Sleep quality and mental health were measured using the Korean version of the Pittsburgh Sleep Quality Index (K-PSQI), Korean version of the Beck Depression Inventory-II (K-BDI-II), Korean version of the Beck Anxiety Inventory (K-BAI), and Korean version of the Beck Hopelessness Scale (K-BHS). The willingness-to-pay (WTP) method was selected to measure the self-evaluated monetary value of household service work. The relationship among the main relevant factors was statistically analyzed through a mediation model. Results: A total of 166 participants were analyzed and classified having poor versus good sleep quality (poor : 24.1%, n = 40 ; good : 75.9%, n = 126 ; cut-off point = 9 on the K-PSQI). Significant between-group differences were observed in mental health status (K-BDI-II, p < 0.001 ; K-BAI, p < 0.001 ; K-BHS, p = 0.003). The moderated mediation model was verified, indicating that depression may mediate the association between nurturing burden and sleep disturbance. The path from nurturing burden to depression may be moderated by average monthly household income. Conclusion: A relatively high portion of full-time female homemakers may suffer from sleep disturbance and interactions between psychological and socio-environmental factors might determine sleep quality, suggesting the need for public health policies targeting improvement of sleep quality and mental health among full-time homemakers.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.6
• /
• pp.775-786
• /
• 2022

In the plant structures including nuclear power plants, penetrations are frequently installed in walls and slabs to reinforce facilities during operation, and reinforcing bars are sometimes cut off during concrete coring. Since these penetrations are not considered at the design or construction stage, cutting of reinforcing bar during opening installation is actually damage to the structure, structural integrity evaluation considering the stress transition range or effective width around the new penetration is necessary. In this study, various nonlinear analyses and static loading experiments are performed to evaluate the effect of reinforcing bar cutting that occurs when a penetration is newly installed in the shear wall of wall-type building of operating nuclear power plant. In addition, the decrease in wall stiffness due to the installed new penetration and cutting of reinforcing bars is evaluated and the stress and strain distributions of rebars around penetration are also measured.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.10
• /
• pp.101-110
• /
• 2006

In general, environment-induced vibration propagates from the center of source to the destination through ground. In fact, the mechanism of wave propagation is highly dependent on the ground conditions, and various methods to protect structures from such a ground vibration have been proposed. The method of wall barrier has been frequently used to cut off ground vibration effectively. However, the capability of wall barrier may be affected by various factors like constituent material of it. Therefore, it is important to figure out appropriate material for the wall barrier. This study is focused on the effect of EPS on the vibration protection. Centrifuge model tests were performed. Two types of models such as a cylindrical and a rectangular wall were used. For the cylindrical type of wall, installation depth was changed, while the length of the wall varied fur the rectangular type to figure out the capability of vibration protection.

• 한국노년학
• /
• v.29 no.4
• /
• pp.1629-1644
• /
• 2009

This study was to examine the relationship between self-differentiation and mental health of elderly couples. This study also tries to investigate the effect of self-differentiation on mental health. Data were collected using self-administered questionnaire method with 271 elderly couples over 55 years old who lived in Chollabuk-Do province. The results showed that first, there was no significant difference in the level of total self-differentiation between husbands and wives. While the level of mental health(depression, somatization) were higher for wives than for husbands. Second, both husbands' and wives' mental health were negatively correlated with self-differentiation. Finally, results of multiple regression analyses showed that both husbands' and wives' mental health were negatively influenced by self-differentiation. Specifically, the variable significant affecting the husbands' mental health was the emotional reactivity of self-differentiation and the variable significant wives' mental health was the emotional cut-off of self-differentiation. These findings confirmed the concept of self-differentiation in applying to mental health of elderly couples.