• Analytical Science and Technology
• /
• v.15 no.1
• /
• pp.72-79
• /
• 2002

Di-(2-ethylhexyl)phthalate (DEHP) may be released from plasticized poly(vinyl chloride) (PVC) articles. In the cases of various methods for the quantitative analysis of migrating DEHP, there are much differences in migrating quantity according to the experimental methods. It is therefore important to make the comparison and analysis between these two results. A study of DEHP migration from blood and infusion bags has been carried out in different methods to evaluate the amount of DEHP migration using gas chromatograph and UV-vis spectrophotometry. Five PVC bags were cut into plane sheets in size of $40{\times}10{\times}0.4mm$, then were immersed in extraction solvent for an hour to release DEHP. It was determined by a gas chromatograph that $23.2{\sim}70.9{\mu}g/mL$ of DEHP was extracted. While extraction solvent was injected into PVC bags which were then placed for an hour to leach DEHP out. It was checked by a UV-vis spectrophotometer that the concentration of DEHP in extraction solvent was $24.8{\sim}41.3{\mu}g/mL$. Two results show different values according to the extraction conditions and experimental methods and the gas chromatographic results were converted into UV-vis spectroscopic results on condition that DEHP would be extracted equally per unit time and unit contact area. It was concluded that DEHP migrating amounts are approximately equal in two analytical methods.

• Archives of design research
• /
• v.15 no.4
• /
• pp.129-138
• /
• 2002

Against the projection that the volume of filing would be drastically cut in the Information Age, the needs for filing in this age increases gradually. In this respect, it is critical to study the design of office filing system furniture. Through this study, we could find out what shall be the major requirements for office lijillg system furniture. This study would also provide important raw data for developing more efficient and more satisfactory office filing system furniture. Subject for this study includes 6 representative filing system furniture including a lateral file cabinet. For the design analysis, we used catalogues of foreign and domestic office furniture, particularly filing system furniture. The analysis is classified into the following six categories such as size, shape, color, material, handle, and filing method, mobility, flexibility, and so on. According to the analysis of office furniture in the market, requirements of furniture fit for office environment are found to be as follows. -Instead of the fixed-type furniture, movable furniture is more adaptable to the ever-evolving office environment. -Design the office furniture in accordance with a standardized module would provide a more unity and diversity of arrangement in space particularly when it is arranged with other furniture. -Development of more diverse color, which ranges from achromatic color to wooden color to other various colors, is more favored in the ever-changing office environment. -As the grip provides a variety of image to the furniture let alone its function, its development is required to be more diverse and more conforming 10 the design of Ihe furniture. -The filing methods in general are with drawer and shelf, among which the drawers design is usually fixed. However, under the evolving office furniture environment, the design of Ihe drawer, bolh inlerior and exterior, shall be more diverse and flexible.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.10 no.2
• /
• pp.102-106
• /
• 2007

While the effort has been made in recycling the FRP (Fiber Reinforced Plastic) used for the medium-to-small size ships, researchers try to find out the methods more favorable for the environments and more value-added. In respect to the fact that the FRP consists of two types of layers, roving and mat, differentiated by the 2-dimensional structure, our group was able to separate the layers of FRP instead of grinding it. The roving cloth was cut to the long glass fibers (about 50 mm long; calling it 'F-fiber' afterwards). F-fiber showed increasing tensile strength and chemical-resistance possibly due to the remained resin (about 25% by weight). In this experiment fiber-reinforced mortars are made of the F-fiber as a recycling method of FRP. The mortar containing 2% (v/v) F-fiber results in 34.6% increment of bending strength from the standard after 28 day curing. The resulting strength is similar to that of the mortar with imported polyvinyl fiber P-54. These results imply that F-fiber can be applied to the 'fiber reinforced mortar' and furthermore may be a substitute for the imported fibers.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.19 no.1
• /
• pp.25-43
• /
• 2016

This research was completed to provide fundamental data regarding the guidelines to installing and managing utility facilities & structures in wetland protected area to advance the functions and sustainable use of ecology services by preserving the ecology within wetland protected area. There were 5 on-site researching areas that were used as the main subject with these areas chosen and considered from 21 inland wetlands that have been designated and are being managed from the Ministry of Environment and by their designated dates as a wetland protected area. The utility facilities in these wetland areas were categorized by their types and a detailed on-site investigation was proceeded with investigation items chosen whereas these facilities are working by their roles from their location, size, used materials, types, information contents and etc., The results showed that regarding informational structures, several locations of information boards were distanced from the main exploring routes which did not consider the visitor's eye level which had their readability dropped and by sunlight, time lapse and water penetration, many information boards were damaged or corrupted so that it was hard to confirm the information noticed or understanding an image. Insufficient observation and educational structures were installed that considered the ecological characteristics of wild animals and their living conditions. Regarding convenience facilities, there were parking lots that were installed on the fore-land and to decrease non-point solution sources, some parking lots needed to be located in protected lowlands while some facilities' shape and colors did not harmonize with their natural surroundings, creating a sense of awareness, which will need some more consideration. As for safety facilities, they were very insufficient compared to other facilities. This means that additional safety structures are needed so that related personnel can be aware of where a visitor is located when an accident occurs. Protectional facilities strongly needed new structures and a management system to cut off entrances and do surveillance so that visitors do not go into areas outside of the managed areas and bring damages to restricted locations. Research labs needed to expand the use of automatic weather systems and water gauge equipments to build fundamental data regarding floodgates that are intimated to the forming of wetlands. Sensor cameras and other types of monitoring systems are needed to monitor the majority types of animals living in the wetlands as well.

• Cartoon and Animation Studies
• /
• s.19
• /
• pp.113-126
• /
• 2010

The digital cartoons market is looking for a new growth momentum as the radical increases of the demands and markets about the mobile contents with portable instrument popularization. The conventional digital cartoons markets which are based on web-toon, page viewer cartoons and e-paper cartoons have been studied various fields to overcome some limitations such as the traditional cartoons had. The mobile cartoons which have been changed more and more, have some canvas limitations due to the mobile screen size. These limitations lead to the communication problems between the cartoonists and the subscribers and resulting some obstacles of mobile cartoons activations. In this paper, we developed a authoring tool applied the Screen Flow method to overcome inefficiency of conventional authoring methods. This proposed method can reflect the cartoonists' during the process of authoring mobile cartoons, thereafter we studied about the authoring method of mobile cartoons and its effects. For the convenience of users creating and distributing content in a way has been studied.

• The Korean Journal of Quaternary Research
• /
• v.17 no.2
• /
• pp.167-168
• /
• 2003

The Upo wetland, the largest natural wetland in Korea, is located in Changnyeong-gun, Gyeongsannam Province ($35^{\circ}33'$ N, $128^{\circ}25'$ E), and 70 km upstream from the Nakdong River estuary. Unlike most other Korean wetlands that have been destroyed under the name of economic development, the Upo wetland has been able to preserve its precious ecosystem throughout the years. Thanks to increased public awareness about natural wetlands and environmental conservation, the Korean Ministry of Environment designated the Upo wetland an 'Ecological Conservation Area' on July 26th, 1997. On March 2nd of the following year, the Upo wetland (8.54 $\textrm{km}^2$) was designated a 'Protected Wetland' in accordance with the international Ramsar Treaty. A 4.49m long (from 9.73 to 5.24 m in altitude) UP-1 core ($35^{\circ}33'05"N$, $128^{\circ}25'17"E$), recovered in the marginal part of the Upo wetland, is divided into eight buried paleosol units of different ages on the basis of the abundance of color mottles and vertical color variations (Aslan et al., 1998). Radiocarbon datings suggested that the paleosol profile represent the last 5700 years. The entire section of the core was more or less subjected to pedogenetic processes, and shows very weak to moderate soil profile development. These Holocene paleosols are therefore regarded as synsedimentary soils of deluvium (deposits formed by floods) origin (Sycheva et al., 2003). Unit 1 to 5 paleosols are generally silt-rich and exhibit moderate profile development. The boundaries between the units are somewhat distinguishable, but not so clear cut. This is due to variable repeated combination of accumulation, denudation and soil forming processes within various periods. Mottle textures gradually decrease in abundance with increasing clay content in Unit 6, which results in weak profile development. The lower boundary of Unit 6 lies around about 2000 yrBP, the beginning of Subatlantic in Korea (Kim et al., 2001). Abrupt sediment textural change is detected in Unit 7, which is interpreted to indicate the human activities on the Upo wetland. Unit 8 represents the recent soil forming processes. The preliminary results of this ongoing study imply the primary factor for pedogenetic processes is the water table fluctuations related to the sedimentary textures like grain size distributions, and the geomorphological stability of the Upo wetland.o wetland.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.12
• /
• pp.7635-7638
• /
• 2013

Background: Sperm-associated antigen 9 (SPAG9) has been recently proposed as a novel biomarker for early diagnosis of several human tumors, including ovarian, cervical and breast cancers. Its clinical value remains to be clarified for endometrial cancer (EC). In this study, we investigated the utility of serum SPAG9 levels in diagnosis of EC and its association with important clinicopathological parameters. Materials and Methods: This cross-sectional study was performed at a tertiary women's referral center in Ankara, Turkey. Preoperative serum samples were collected from patients surgically treated for endometrial cancer between June 2012-April 2013. Similar aged women with a biopsy proven benign endometrium were used as controls. Serum SPAG9 levels were measured with an enzyme-linked immunosorbent assay (ELISA) method and assessed for links with clinicopathological factors. Receiver operating characteristic (ROC) curve analysis was performed to assess power of SPAG9 levels for EC prediction. P values less than 0.05 were considered statistically significant. Results: A total of 63 women with EC and 27 with benign endometrium were included in the study. Mean age in the EC group was $58.7{\pm}1.1$. Median SPAG9 levels in the EC and control groups were 18.3 (range, 12.7-53.8) and 14.1 (range, 4.3-65.3), respectively (p<0.001). A cut-off value of 17 ng/ml for SPAG9 predicted presence of malignant endometrium with 74% sensitivity and 83% specificity [Area under curve (AUC)=0.82, p<0.001]. SPAG9 levels did not demonstrate any significant association with histological type, FIGO stage, tumor grade, size, myometrial invasion, lymphovascular space invasion, cervical involvement, adnexal involvement, peritoneal cytology or lymph node status (all p>0.05). Conclusions: Testing for SPAG9 may be useful for early detection of EC in asymptomatic high-risk women. Its role in post-treatment follow-up and early detection of recurrence should be assessed in future trials.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.9 no.1
• /
• pp.25-34
• /
• 1976

The purpose of the present study on the radula of Korean marine gastropods is to determine the systematic position of the species by the radula features. The radula features of 9 Families based on the observation of specimens consisting of 31 species are described briefly as follows. 1. Naticidae; Radula formula 2-1-C-1-2. Rachidian is 3-cusped. All cusps are strong and pointed. The lateral tooth is massive and strong with a huge triangula cusp. Two marginal teethare slender, long and strong. 2. Cymatidae; Radula formula 2-1-c-1-2. Fachidian, 1-cusped. Cusp is strong and acute. The basal margin is toothed with a number of small denticles. The lateral tooth is beak-like and strong with groove inside. The marginal teeth are slender and pointed. 3. Tonnidae; Radula Formula 2-1-C-1-2. Rachidian, 3 cusped. Central cusp is huge, strong and abruptly pointed. Lateral cusp is blunt and relatively small. The lateral tooth and maginal teeth are identical to that of the preceding one. 4. Muricidae; Radula formula 1-C-1. Rachidian has 3 to 5 cusps. Central cusp, long, thick, strong and pointed. Lateral cusps are rather shorter than central, thick, strong and well cut with several minute denticles along outer margin. The lateral tooth is falciform. 5. Pyrenidae; Radula formula 1-c-1 Rachidian lacks of cusp. The base is thin, narrow, small and rectangular. Lateral tooth has 2 cusps with a crescent shaped base. 6. Buccinidae; Radula formula 1-C-1. Rachidian has 3 to 7 cusps. The base is massive and broadened laterally. The lateral tooth is large-and has 2 to 4 cusps. The central cusp is the shortest, and become longer towards the each side. 7. Busyconidae ; Radula formula 1-C-1. Rachidian, 3-cusped with a massive base. All cusps are pointed and strong. Centeral cusp is rather shorter than lateral one. Lateral tooth, 2-cusped. Inner cusp short about one half the length of outer one. 8. Fasciolariidae; Radula formula 1-C-1. Rachidian, 3 to 4-cusped. Very small in size. Lateral tooth broadened laterally with about 10 thin, long, sharp cusps. 9. Volutidae ; Only the rachidian exists. Rachidian, 3-cusped. All cusps are strong and sharply pointed. Central cusp is narrower than lateral ones. Anterior basal margin is concave.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.4
• /
• pp.225-235
• /
• 2020

Ultrasonic investigation of damage detection has been widely used for non-destructive testing of various concrete structures. This study focuses on damage detection analysis with the aid of wave propagation in two-phase composite concrete with aggregate (inclusion) and mortar (matrix). To fabricate a realistic simulation model containing a variety of irregular aggregate shapes, the mesh generation technique using an image processing technique was proposed. Initially, the domains and boundaries of the aggregates were extracted from the digital image of a typical concrete cut-section. This enables two different domains: aggregates and mortar in heterogeneous concrete sections, and applied the grids onto these domains to discretize the model. Subsequently, finite element meshes are generated in terms of spatial and temporal requirements of the model size. For improved analysis results, all meshes are designed to be quadrilateral type, and an additional process is conducted to improve the mesh quality. With this simulation model, wave propagation analyses were conducted with a central frequency of 75 kHz of the Mexican hat incident wave. Several void damages, such as needle-shaped cracks and void-shaped holes, were artificially introduced in the model. Finally, various formats of internal damage were detected by implementing energy mapping based signal processing.

• Journal of the Korea Concrete Institute
• /
• v.26 no.3
• /
• pp.307-313
• /
• 2014

In order to predict the post-cracking tensile behavior of fiber reinforced concrete, it is necessary to evaluate the fiber orientation factor which indicates the number of fibers bridging a crack. For investigation of fiber orientation factor on a circular cross-section, in this paper, cylindrical steel fiber reinforced concrete specimens were casted with the variables of concrete compressive strength, circular cross-section size, fiber type, and fiber volumetric ratio. The specimens were cut perpendicularly to the casting direction so that the fiber orientation factor could be evaluated through counting the number of fibers on the circular cross-section. From the test results, it was investigated that the fiber orientation factor on a circular cross-section was lower than 0.5 generally adopted, as fibers tended to be perpendicular to the casting direction. In addition, it was observed that the fiber orientation factor decreased with an increase of the number of fibers per unit cross-section area. For rational prediction of the fiber orientation factor on a circular section, a rigorous model and a simplified equation were derived through taking account of a possible fiber inclination angle considering the circular boundary surface. From the comparison of the measured data and the predicted values, it was found that the fiber orientation factor was well predicted by the proposed model. The test results and the proposed model can be useful for researches on structural behavior of steel fiber reinforced columns with a circular cross-section.