• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.163-166
• /
• 2005

Multilayer LTCC technology enables RF modules to be reduced dramatically by taking advantage of the three dimension flexibility. Compared to a conventional two dimensional PCB, LTCC allows higher density, reduced size, and lower cost. In this research, BPF based on LTCC for 900MHz ZigBee application was implemented which can replace SAW filter with using the material of the Dupont9599's dielectric constant 7.8. And distributed baud pass filter for 900MHz ZigBee system applications is presented. Using resonator stripline and capacitance, 2nd order band pass filter was designed. Adjusting resonator's length and capacitance is easy to tune at accurate center frequency by shifting band because ZigBee system is using narrow bandwidth, $902MHz^{\sim}928MHz$. Also resonator has no limitation in space, so reducing size is possibile. Designed filter had I.L. 2.8dB at 915MHz and attenuation at 815MHz, 1015MHz was 16dB, 15dB, respectively. Therefore, the sharpe cut-off and good insertion loss for ZigBee system application.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.684-687
• /
• 2002

The authors have developed two devices which cuts the spend fuel rod to an optimal size and extracts fuel pellet from the pieces of cut fuel rods. These devices are so important to reduce radioactive wastes that some advanced countries developed their own methods and devices. The authors have benchmarked from these methods and devices. For spent fuel rod cutting, the tube cutting method has been chosen. some mechanical properties of the fuel tube and pellet has been carefully considered for an optimal cutting size. For fuel pellet extraction, a mechanically extracting method has been adopted. The existing chemical method have turned out to be inappropriate because it produced large amount of radioactive wastes, in spite of its high fuel recovery characteristics. The developed method has an advantage that it can be applied to other fuel rods that have different shapes and sizes. The two devices are set up and operated in the hot cell where people can not go in, so that the devices have been designed to be controlled remotely and modulated for easy maintenance. And the performance of the devices has been tested by using simulated fuel rod. From the experimental results, the devices are supposed to be useful for reducing radioactive wastes.

• 상하수도학회지
• /
• 제14권3호
• /
• pp.224-230
• /
• 2000

Membrane processes are capable of removing much materials from water. The removal or rejection characteristics of a membrane is usually depend upon the nominal pore size or MWCO(molecular weight cut off). A membrane with a smaller nominal pore size or MWCO should be capable of removing smaller contaminants from water. A series of experiments was performed to investigate the separation characteristics of membrane processes which consisted of microfiltration(MF) and nanofiltration(NF). To evaluate removal efficiencies of some pollutants such as the consumption of $KMnO_4$, THMFP, NH3-N, Fe, Mn, and pesticides, source water sampled from the Kum river was treated by the those membrane processes. Also, the results of experiments were compared with those of conventional water treatment processes. By two types of the membrane process, total removal efficiency of $KMnO_4$ consumed, THMEP, and $NH_3-N$ were 91.0%, 84.3%, and 85.5%, respectively and those processes were efficient in pesticides removal as well. Most of the effluents satisfied the Korean standard of drinking water quality continuously in the experimental periods. However, NF was needed for producing the safe drinking water in case of treating the raw water contaminated with Mn since removal efficiency of MF was not high enough. On the basis of the experimental results, it was suggested that NF could be applied to remove not only $NH_3-N$ but THMFP even without pre-chlorination.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.698-701
• /
• 2005

This paper examines that is extracted certain information in forest areas within high resolution imagery based on wavelet transformation. First of all, study areas are selected one more species distributed spots refer to forest type map. Next, study area is cut 256 x 256 pixels size because of image processing problem in large volume data. Prior to wavelet transformation, five texture parameters (contrast, dissimilarity, entropy, homogeneity, Angular Second Moment (ASM≫ calculated by using Gray Level Co-occurrence Matrix (GLCM). Five texture images are set that shifting window size is 3x3, distance .is 1 pixel, and angle is 45 degrees used. Wavelet function is selected Daubechies 4 wavelet basis functions. Result is summarized 3 points; First, Wavelet transformation images derived from contrast, dissimilarity (texture parameters) have on effect on edge elements detection and will have probability used forest road detection. Second, Wavelet fusion images derived from texture parameters and original image can apply to forest area classification because of clustering in Homogeneous forest type structure. Third, for grading evaluation in forest fire damaged area, if data fusion of established classification method, GLCM texture extraction concept and wavelet transformation technique effectively applied forest areas (also other areas), will obtain high accuracy result.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1279_1280
• /
• 2009

Vanadium dioxide(VO2) has been reported to be the most attractive material for thermochromic windows due to its semiconductor-metal phase transition at around $68^{\circ}C$. However, our previous experiment showed it is difficult to grow VO2 thin films directly on glass substrate, whereas thermochromic VO2 thin films were successfully grown on R-cut sapphire substrate. Properties of VO2 thin films on different orientations of sapphire substrates were already reported. Furthermore, VO2 thin films were successfully grown heteroepitaxially on (001) preferred oriented ZnO coated glass. We deposited VO2 thin films using V2O5 targets on substrates with various lattice parameters with same orientation(SrTiO3, MgO, and Sapphire substrate of (001) orientation) by pulsed laser deposition. In this work, we will discuss the effects of lattice misfit, substrate-induced stress and grain size on the properties of VO2 thin films deposited on various substrate materials.

• 한국의류학회지
• /
• 제20권4호
• /
• pp.586-595
• /
• 1996

급변하는 국내외의 교역환경 변화에 따라 의류산업에도 새로운 경영 전략 수립이 요구되고 있다. Quick Response(QR)는 의류제품을 생산하는 기업의 경쟁력을 증가시키기 위해 소개된 새로운 경영 전략으로서, 유통 채녈 사이에 정보와 상품의 흐름을 효울화시켜 최대의 소비자 만족을 제공한다. 본 연구의 목적은 QR technologies의 사용현황을 밝히고 기업 특성과 QR technologies 사용수준과의 관계를 조사하였다. 종족변수는 QR technologies의 사용 수준이며, 선별된 독립변수들은 기업크기 (firm size), 기업전략 (organizational strategy), 제품종류(product category) , 패션변화(fashion change), 주기 적변화(seasonal change)였다. 조사대상은 미국 전역에서 무작위로 추출된 306개의 의류업체를 대상으로 하였으며, 1차 우편과 2차 전화로, 설문지를 통해 자료수집을 하였다. 설문 응답률은 47%(n=103)였고, 자료의 분석은 기술통계(i, e., 빈도, 퍼센트)와 비모수통계기법을 사용하였다. 가장 많이 사용되고 있는 QR technologies는 소량주문(small lot orders) , 단기 사이클 재단 계획 (short cycle cut planning)과 고객의 견이 반영 된 생산계획 (Production planning with customers)이였다. 가장 적게 사용되고 있는 QR technologies는 전자 재주문(electronic reorder)과 단위 생산 시스템 (unit production system)이 였다. QR technologies 사용수준에 관계가 있는 것은 기업크기 (firm size), 기업전략 (organizational strategy), 패션변화(fashion change) 임으로 나타났다. 의류업체의 크기가 클수록, 혁신적 선도기업 일수록, 패션변화가 큰 제품을 취급할수록 QR technologies의 사용수준이 높은 것으로 나타났다. 의류업체는 자원과 생산하는 제품종류에 따라 경영전략과 QR technologies의 사용수준이 다양하였다.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2003년도 춘계종합학술대회논문집
• /
• pp.223-226
• /
• 2003

DDoS(Distributed Denial of Service) 공격으로부터 시스템 자원을 보호하기 위한 최선의 방법은 공격자에 의해 전송되어진 패킷의 경로를 역추적하여 공격자의 근원지로부터 근본적인 DDoS 공격을 차단하는 것이다. 기존의 패킷 마킹 기법은 IP 식 별자필드를 마킹필드로 사용함으로써 ICMP의 사용이 불가능하고, 라우터 토를 이용한 역추적기법은 라우터의 수가 증가할 경우 마킹필드의 크기가 증가하는 문제점을 가지고 있다. 본 논문에서 제안한 역추적 기법은 IP 헤더의 옵션필드를 마킹필드로 사용하여 ICMP를 사용을 가능하게 하였고, 라우터 IP주소를 태R 연산하여 얻어진 값을 마크정보로 사용함으로써 라우터 수의 증가에도 마크정보의 크기가 변하지 않도록 제안하였다.

• 한국정보과학회논문지:시스템및이론
• /
• 제27권3호
• /
• pp.287-299
• /
• 2000

본 논문에서는 양방향 토러스 네트워크와 웜홀 라우팅을 사용하는 다중컴퓨터에 대해 멀티캐스트 통신방법을 트리방식, 경로방식, 그리고 두 방식을 조합한 하이브리드방식으로 분류하였다. 경로방식으로는 동적분할 멀티캐스트 라우팅 알고리즘을 제안하였으며, 하이브리드방식으로는 라우팅의 첫 단계로 트리방식을 사용하고 두 번째 단계로는 경로방식을 사용하는 멀티캐스트 라우팅 알고리즘을 제안하여 성능을 분석하였다. 세가지 멀티캐스트 라우팅 알고리즘간의 성능은 메세지 길이에 따른 평균 지연시간을 사용하여 비교하였다. 그리고 웜홀 라우팅에서 플릿 버퍼 크기의 변화에 따른 성능을 가상 컷-스루와 비교 하였으며, 경로방식의 알고리즘을 사용하여 버퍼 크기의 변화에 따른 지연시간을 기준으로 두 스위칭 방식의 성능관계를 분석하였다.

• 전자공학회논문지A
• /
• 제33A권10호
• /
• pp.130-138
• /
• 1996

The size of a device needs to scale down to increase its integrity and speed. As the size of the device is reduced, the hot-carrier degradation that severely effects on device reliabilty is concerned. In this paper, sub-micron buried-channel P-MOSFETs were fabircated, and the hot-carrier effects were invetigated. Also the hot-carrier effect in the buired-channel P-MOSFETs and the surface-channel P-MOSFETs were compared with simulation programs using SUPREM-4 and MINIMOS-4. This paper showed that the electric characteristics of sub-micron P-MOSFET are different from those of N-MOSFET. Also it showed that the punchthrough voltage ( $V_{pt}$ ) was abruptly drop after applying the stress and became almost 0V when the channel lengths were shorter than 0.6.mu.m. The lower punchthrough voltage causes the device to operte poorly by the deterioration of cut-off characteries in the switching mode. We can conclude that the buried channel P-MOSFET for CMOS circuits has a limit of the channel length to be around 0.6.mu.m.

• 한국입자에어로졸학회지
• /
• 제14권3호
• /
• pp.73-80
• /
• 2018

Recently, there has been much research on the effect of ultrafine dust on human body with increasing interest in the ultrafine dust. In the Republic of Korea, there are many old thermal power plants, and the amount of ultrafine dust emitted from the thermal power plants is reported to be about 14% of the total amount of domestic fine dust. Therefore, the amount of fine dust from the flue gas desulfurization facility in the thermal power plant needs be reduced. In this study, we made an experimental setup to simulate a flue gas desulfurization facility and analyzed the physical characteristics of the particles passing through a mist eliminator. Experiments were carried out to investigate the collection efficiency of the mist eliminator by using the Arizona Test Dust in a dry environment, and then spraying limestone slurry into the flue gas desulfurization system equipped with the mist eliminator to examine the size and morphology of limestone particles upstream and downstream of the mist eliminator. Cut-off size of the mist eliminator was formed at about $6{\mu}m$. The result of this study is expected to be helpful for designing an electrostatic precipitator for removing particles passing through the mist eliminator.