• Journal of Korean Society of Forest Science
• /
• v.87 no.3
• /
• pp.383-390
• /
• 1998

The purpose of this study was to evaluate the effect of new materials with forest topsoil for hydroseeding measures that is environmentally and ecologically stable revegetation measures on rock cut-slopes. Field hydroseeding experiment was used with a completely randomized design at highway rock cut-slopes in April, 1997. Results obtained in this study were summarized as follows: Particle size distribution of 3 mixed-soil materials that consisted of forest topsoil, decomposed granite soil, compost, sludge, and bottom ash did not show a significant difference. As appending the amount of forest topsoil, soil bulk density was increased. Soil hardness was slightly increased in early period, and then decreased with the flourishing of plants. The number of individuals increased, more than $3,000seedlings/m^2$, after 1 month, and it was decreased as time passes because of competition between the seeded species and the naturally emerged species. In addition to the seeded species, seeding plot has more than 6 species (Rubus crataegifolius, Eleusine indica, Erigeron canadensis, Lycopersicon esculentum var. cerasiforme, etc.) per $m^2$ were naturally appeared in the first year. From the viewpoint of species diversity promotion, the capability of using forest topsoil as seed bank sources was high. In order to apply in the field, the investigation and analysis of topsoil availability (quantity and quality of seed source, soil texture and organic composition) should be carried out before-hand.

• Horticultural Science & Technology
• /
• v.31 no.6
• /
• pp.714-719
• /
• 2013

The bent peduncle phenomenon (BPP) is known as a kind of physiological disorders found in cut rose plants, which causes the reduction of cut flower yields. As yet unknown mechanisms, however, it has not been easy to find solutions for BPP. To address this challenge, this study was conducted to investigate the characteristics of floral morphology, growth, and endogenous phytohormone level of BPP shoots in cut rose plants (Rosa hybrida L. 'Beast'). Morphological observation confirmed the fact that BPP was accompanied by the early formation and being phyllody of a specific sepal among five sepals, which gave rise to peduncle bending in the upper part of the phyllody with fasciation. Year-round BPP frequency in 'Beast' cultivar was in the range of 5 to 20% with seasonal change, increasing rapidly with an average temperature rise in summer. Except bent peduncle, the BPP shoots appeared to grow normally in terms of speed and size of floral development in comparison with normal. However, carbohydrate distribution to the floral part in BPP shoots was significantly reduced. The level of endogenous IAA (3-Indoleacetic acid) within the floral part in BPP shoots was highly maintained during floral development, in contrast to normal shoots. $GA_3$ contents were not significantly different between normal and BPP shoots. This study indicates that BPP would be induced by a series of courses: abnormally early formation of a specific sepal relative to high temperature, being phyllody of the sepal with fasciation, and continuous supply of endogenous IAA by phyllody.

• The Journal of Engineering Geology
• /
• v.14 no.1
• /
• pp.71-80
• /
• 2004

The failure of cut slopes frequently occurs particularly during the thawing season and the rain season in summer. This study interpreted data collected from site to which a real-monitoring system was applied in order to analyze the causes of ground behaviors and to forecast future slope failure. As for research methods, this study analyzed the size and mechanism of failure by integrating the results of field surveys and measurements. Furthermore, it analyzed data transmitted by the monitoring system installed in the a result, three times of ground displacement occurred as well as a number of partial tension cracks. The cut slope composed of sandstone and siltstone started its initial behavior as a result of torrential downpour and the loss of support of the substructure. For quantitative analysis of the characteristics of ground behavior, this study measured 5 lateral lines. According to the result of the measurement, displacement happened little in the section to which countermeasure had been applied, but displacement of maximum 400mm happened in the section to which countermeasure had not bee applied. The analysis of data on displacement and rainfall suggested a close relationship between ground behavior and rainfall. According to the result of stability interpretation along with the change of ground saturation, stability rate appeared to be less than 1.0 when ground saturation is over 55%. Although the current trend of ground behavior is at a stable stage falling within the range of tolerance, it is considered necessary to continue monitoring and data analysis because ground displacement is highly possible with the change of temperature during the winter.

• Korean Journal of Plant Resources
• /
• v.34 no.4
• /
• pp.270-277
• /
• 2021

Veronica rotunda var. subintegra (Nakai) T. Yamaz. is perennial herb belonging to the family Scrophulariaceae, native to Korea. Plant growth regulators, cutting mediums, cutting position, and leaf size were examined to investigate the requirements for cutting propagation of V. rotunda var. subintegra. This study was conducted over a period of 6 weeks from March to May 2017 in the Division of Plant Resources, Korea National Arboretum. For all treatments, survival and rooting percentage was 100%. In PGRs experiment, the number of roots and shoot length treated with 100 mg/L IBA treatment was significantly higher than that of NAA treatment. The shooting percentage was decreased with an increase of the PGRs concentration. In growing substrates experiment, the number of roots on commercial soil (61.2) was the highest, followed commercial + kanuma soil (45.7), and the lowest was kanuma soil (41.8). The shoot length treated with commercial soil (8.9 cm) was significantly greater than that of kanuma soil (4.1 cm). In cutting positions experiment, the number of roots treated with apical (56.6) was significantly higher than that of basal (38.8). In leaf-cut experiment, the number of roots and of shoot length treated with full leaf was significantly higher than that of half leaf. As a result, we recommend treating cuttings with 100 mg/L IBA treatment, commercial soil, apical position, and full leaf for successful cutting propagation of V. rotunda var. subintegra.

• Asian Journal of Atmospheric Environment
• /
• v.11 no.2
• /
• pp.96-106
• /
• 2017

In this study, measurements of size-segregated particulate matter (PM) emitted from the combustion of rice straw, pine needles, and sesame stem were conducted in a laboratory chamber. The collected samples were used to analyze amounts of organic and elemental carbon (OC and EC), water-soluble organic carbon (WSOC), humic-like substances (HULIS), and ionic species. The light absorption properties of size-resolved water extracts were measured using ultraviolet-visible spectroscopy. A solid-phase extraction method was first used to separate the size-resolved HULIS fraction, which was then quantified by a total organic carbon analyzer. The results show that regardless of particle cut sizes, the contributions of size-resolved HULIS ($=1.94{\times}HULIS-C$) to PM size fractions ($PM_{0.32}$, $PM_{0.55}$, $PM_{1.0}$, and $PM_{1.8}$) were similar, accounting for 25.2-27.6, 15.2-22.4 and 28.2-28.7% for rice straw, pine needle, and sesame stem smoke samples, respectively. The $PM_{1.8}$ fraction revealed WSOC/OC and HULIS-C/WSOC ratios of 0.51 and 0.60, 0.44 and 0.40, and 0.50 and 0.60 for the rice straw, pine needle, and sesame stem burning emissions, respectively. Strong absorption with decreasing wavelength was found by the water extracts from size-resolved biomass burning aerosols. The absorption ${\AA}ngstr{\ddot{o}}m $ exponent values of the size-resolved water extracts fitted between 300 and 400 nm wavelengths for particle sizes of $0.32-1.0{\mu}m$ were 6.6-7.7 for the rice straw burning samples, and 7.5-8.0 for the sesame stem burning samples. The average mass absorption efficiencies of size-resolved WSOC and HULIS-C at 365 nm were 1.09 (range: 0.89-1.61) and 1.82 (range: 1.33-2.06) $m^2/g{\cdot}C$ for rice straw smoke aerosols, and 1.13 (range: 0.85-1.52) and 1.83 (range: 1.44-2.05) $m^2/g{\cdot}C$ for sesame stem smoke aerosols, respectively. The light absorption of size-resolved water extracts measured at 365 nm showed strong correlations with WSOC and HULIS-C concentrations ($R^2=0.89-0.93$), indicating significant contribution of HULIS component from biomass burning emissions to the light absorption of ambient aerosols.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.3
• /
• pp.370-374
• /
• 2003

Cell cracking method using a non-collision was evaluated for the possibility of new red ginseng grinding technique. Based on particle size distribution analysis by 1size shaker, the ratios of 100 mesh penetrated particles were 94.9% for hammer mill (group A) and 95.6% for cell crack (group B). The ratio of 120 mesh penetrated particle of group A was higher than that in group B. The particle size distributions for 100 mesh non-penetrated Powder between 2 groups were not significantly different, and particle size distribution analysis by laser scattering analyzer showed that the particle size ranges were 0.77~128.07 ${\mu}{\textrm}{m}$ for group A and 4.24~180.07 ${\mu}{\textrm}{m}$ for group B. The Particle size distribution in group A was more broad than that in group B. The mean particle size in group B was larger than that in group A, while the standard deviation of particle size distribution in group B was less than that in group A. Structural surface characteristics, in group A, particle size distribution was broad and the distribution curve was amorphous. The structure of individual particles was similar to unequal stone which was roughly grinded and had soft cotton-like surface. In the contrary, in group B, particle size distribution was relatively narrow and also individual size particles were ubiquitously distributed. The structure of individual particles was unequal cut stone shape.

• International Journal of Highway Engineering
• /
• v.10 no.2
• /
• pp.183-191
• /
• 2008

This study evaluated influence of the loading head dimension on characteristics of deformation strength ($S_D$) of asphalt mixtures. Kim test and Wheel tracking (WT) test were conducted to evaluate $S_D$ characteristics with relation to WT results for various mixtures. The $S_D$ values and coefficient of variation of $S_D$ values of r=10mm were smaller than those of r=10.5mm. It was also found that $S_D$ values obtained using r=10mm loading head showed high correlations with rut parameters of WT test. It was indicated that the aggregate size and radius (r) of round cut were statistically significant variables on $S_D$ at = 0.05 level in the analysis of variance. However, in interaction of r and aggregate size showed no significance within $10{\sim}19mm$ aggregate size at the same level. Therefore, it was concluded that the diameter (D) of 40mm and the bottom edge radius (r) of 10mm was suitable dimension of loading head for deformation strength test.

• Journal of Welding and Joining
• /
• v.24 no.4
• /
• pp.32-38
• /
• 2006

The objective of present research works is to investigate the effects of process parameters, including the power of laser, cutting speed, material thickness, and the edge angle, on the melted area in the sharp edge of the cut material fur the case of cutting of a low carbon steel sheet using high-power CW Nd:YAG laser. In order to investigate the influence of edge angle and size of loop on the melted area in the sharp edge, angular cutting tests and loop cutting tests have been carried out. From the results of angular cutting tests, the relationship between the edge angle and the melted area has been obtained. The results of the experiments have been shown that the melted area is rapidly reduced from $120^{\circ}$ of the edge angle and the melted area is nearly zero at $150^{\circ}$ of the edge angle. Through the results of loop cutting experiments, the relationship between the cutting angle on the melted area in the edge according to the size of loop have been obtained. In addition, it has been shown that a proper size of loop is nearly 3 mm as the corner angle is greater than $90^{\circ}$ and 5 mm as the comer angle is less than $90^{\circ}$. The results of above experiments will be reflected on the knowledge base to generate optimal cutting path of the laser.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.1
• /
• pp.5-15
• /
• 2012

This paper presents the results of an investigation into the pull-out characteristics of screw anchor piles for use in braced excavation and cut-slope. A series of reduced-scale model tests were performed on model screw anchor piles with different geometric characteristics such as screw size and pitch length. The results indicated that the pullout resistance increases with decreasing the pitch length for a given screw size. It was also observed that the pullout capacity of a screw anchor pile increases with the screw size up to a certain size beyond which the increase becomes minimal. The results are presented in such a way that the pullout characteristics of screw piles with different screw geometric characteristics can be identified. Practical implications of the findings are discussed.

• Journal of Chest Surgery
• /
• v.56 no.6
• /
• pp.394-402
• /
• 2023

Background: The optimal choice of valve substitute for aortic valve replacement (AVR) in pediatric patients remains a matter of debate. This study investigated the outcomes following AVR using mechanical prostheses in children. Methods: Forty-four patients younger than 15 years who underwent mechanical AVR from March 1990 through March 2023 were included. The outcomes of interest were death or transplantation, hemorrhagic or thromboembolic events, and reoperation after mechanical AVR. Adverse events included any death, transplant, aortic valve reoperation, and major thromboembolic or hemorrhagic event. Results: The median age and weight at AVR were 139 months and 32 kg, respectively. The median follow-up duration was 56 months. The most commonly used valve size was 21 mm (14 [31.8%]). There were 2 in-hospital deaths, 1 in-hospital transplant, and 1 late death. The overall survival rates at 1 and 10 years post-AVR were 92.9% and 90.0%, respectively. Aortic valve reoperation was required in 4 patients at a median of 70 months post-AVR. No major hemorrhagic or thromboembolic events occurred. The 5- and 10-year adverse event-free survival rates were 81.8% and 72.2%, respectively. In univariable analysis, younger age, longer cardiopulmonary bypass time, and smaller valve size were associated with adverse events. The cut-off values for age and prosthetic valve size to minimize the risk of adverse events were 71 months and 20 mm, respectively. Conclusion: Mechanical AVR could be performed safely in children. Younger age, longer cardiopulmonary bypass time and smaller valve size were associated with adverse events. Thromboembolic or hemorrhagic complications might rarely occur.