• Journal of the Korea Safety Management & Science
• /
• v.13 no.3
• /
• pp.45-53
• /
• 2011

The research proposes seven elimination rules of redundant gates and blocks in Fault Tree Analysis (FTA) and Reliability Block Diagram (RBD). The computational complexity of cut sets and path sets is NP-hard. In order to reduce the complexity of Minimal Cut Set (MCS) and Minimal Path Set (MPS), the paper classifies generation algorithms. Moreover, the study develops six implementation steps which reflect structural importance (SI) and reliability importance (RI) from Reliability Centered Maintenance (RCM) that a priority of using the functional logic among components is to reduce (improve) the system unavailability (or availability). The proposed steps include efficient generation of state structure function by Rare Event Enumeration (REA). Effective use of importance measures, such as SI and ill measures, is presented based on the number and the size of MCS and MPS which is generated from the reference[5] of this paper. In addition, numerical examples are presented for practitioners to obtain the comprehensive understanding of six steps that is proposed in this research.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.1
• /
• pp.225-233
• /
• 2012

The research discusses interrelationship of structural and reliability importance measures which used in the probabilistic safety assessment. The most frequently used component importance measures, such as Birnbaum's Importance (BI), Risk Reduction (RR), Risk Reduction Worth (RRW), RA (Risk Achievement), Risk Achievement Worth (RAW), Fussel Vesely (FV) and Critically Importance (CI) can be derived from two structure importance measures that are developed based on the size and the number of Minimal Path Set (MPS) and Minimal Cut Set (MCS). In order to show an effectiveness of importance measures which is developed in this paper, the three representative functional structures, such as series-parallel, k out of n and bridge are used to compare with Birnbaum's Importance measure. In addition, the study presents the implementation examples of Total Productive Maintenance (TPM) metrics and alternating renewal process models with exponential distribution to calculate the availability and unavailability of component facility for improving system performances. System state structure functions in terms of component states can be converted into the system availability (unavailability) functions by substituting the component reliabilities (unavailabilities) for the component states. The applicable examples are presented in order to help the understanding of practitioners.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.56-59
• /
• 1997

SAW filters of transversal type were fabricated on some piezoelectric substrates of the LN 128$^{\circ}$ Y-X, LN 64$^{\circ}$Y-X, Quartz ST-cut wafers through the simulation in which the number o: IDT and window function were changed for the required frequency, and the mask making. Their IDT spacing and width were 3 ${\mu}{\textrm}{m}$, chip size was 4.462 $\times$ 2.086 mm$^2$, and they had double electrode transversal type IDTs. In addition to pure Al electrode devices, Ti thin films having the different thicknesses was introduced between the Al electrode and the substrate for improving the power resistance strength. They had 11-12 dB insertion losses similar to those of pure Al electrode SAW filters in case of LN 128$^{\circ}$ Y-X, LN 64$^{\circ}$ Y-X, meaning that Ti thin film was not detrimental to the insertion loss and general frequency properties. The filters had the center frequencies 162MHz for LN 128$^{\circ}$ Y-X, 186MHz for 64$^{\circ}$ Y-X, and 131MHz for Quartz ST-cut substrates.

• Korean Journal of Materials Research
• /
• v.30 no.12
• /
• pp.672-677
• /
• 2020

Expensive PCBN or ceramic cutting tools are used for the processing of difficult-to-cut materials such as Ti and Ni alloy materials. These tools have a problem of breaking easily due to their high hardness but low fracture toughness. To solve this problem, cutting tools that form various coating layers are used in low-cost WC-Co hard material tools, and researches on various tool materials are being conducted. In this study, WC-5, 10, and 15 wt%Ni hard materials for difficult-to-cut cutting materials are densified using horizontal ball milled WC-Ni powders and pulsed current activated sintering method (PCAS method). Each PCASed WC-Ni hard materials are almost completely dense, with a relative density of up to 99.7 ~ 99.9 %, after the simultaneous application of pressure of 60 MPa and electric current for 2 min; process involves almost no change in the grain size. The average grain sizes of WC and Ni for WC-5, 10, and 15 wt%Ni hard materials are about 1.09 ~ 1.29 and 0.31 ~ 0.51 µm, respectively. Vickers hardness and fracture toughness of WC-5, 10, and 15 wt%Ni hard materials are about 1,923 ~ 1,788 kg/mm2 and 13.2 ~ 14.3 MPa.m1/2, respectively. Microstructure and phase analyses of PCASed WC-Ni hard materials are performed.

• Korean Journal of Plant Resources
• /
• v.25 no.1
• /
• pp.156-168
• /
• 2012

Chrysanthemum is a cut flower species that normally lasts for 1 to 2 weeks, in some cases 3-4 weeks. This has been attributed to low ethylene production during senescence. Reduction in cut flower quality has been attributed to the formation of air embolisms that partially or completely blocks the water transport from the vase solution to the rest of the cut flower stem, increasing hydraulic resistance which may cause severe water stress, yellowing, wilting of leaf, and chlorophyll degradation. Standard type chrysanthemum can be harvested when buds were still tightly closed and then fully opened with the simple bud-opening solution. Standard type chrysanthemum can also be harvested when the minimum size of the inflorescence is about 5-6 cm bud which opened into the first flower full-sized flower. While spray varieties can be harvested when 2-4 most mature flowers have opened (40% opening). Cut flowers are sorted by stem length, weight, condition, and so on. Standard chrysanthemum is 80 cm length for standard type and 70cm for spray type. Pre-treatment with a STS, plant regulator such as GA, BA, 1-MCP, chrysal, germicide, and sucrose, significantly improved the vase life and quality of cut flowers. It is well established that vase solutions containing sugar can improve the vase life of cut chrysanthemum. Chrysanthemum is normally packed in standard horizontal fiberboard boxes. Chrysanthemum should normally be stored at $5{\sim}7^{\circ}C$. Precooling resulted in reduction in respiration, decomposition, and transpiration activities as well as decoloration retardation. There was significant difference between "wet" storage in 3 weeks and "dry" storage in 2 weeks. In separate pulsing solution trials, various germicides were tested, as well as PGRs to maintain the green color of leaves and turgidity. Prolonging vase life was attained with the application of optimal solution such as HQS, $AgNO_3$, GA, BA and sucrose. This also retarded senescence in leaves of cut flower stems. Fresh cut chrysanthemum can be transported using a refrigerated van with $5{\sim}7^{\circ}C$. Increasing consumption and usage of cut chrysanthemum of various cultivars would require efficient transport system, and effective information exchange among producer, wholesaler, and consumer.

• Journal of Animal Science and Technology
• /
• v.55 no.5
• /
• pp.373-380
• /
• 2013

The study aimed to develop prediction models of primal cut yield using body measurements of Hanwoo steers in Korea. The progeny of 874 steers at Hanwoo Improvement Main Center from 2008 to 2010 were recorded. Pearson's correlation coefficients for primal cuts and other traits were estimated. Primal cuts were adjusted for slaughter date and age using the SAS GLM procedure. Afterwards, a stepwise regression was performed on each primal cut by fitting body measurement traits. An independent covariable was selected at the highest coefficient of determination with the greater fitness model using Mallows's Cp statistic. Results showed that primal cuts were significantly influenced by slaughter date (P<0.01). The age at slaughter, however, was only significant for the top round (P<0.05). There was a moderate to high correlation between chest girth and tenderloin (0.54), loin (0.74), and rib (0.80). Most primal cut percentages were negatively related to BFT. Similar negative to low positive correlations were observed for primal cut percentage and body size traits. In addition, a correlation of 0.21 was observed between rib percentage and chest girth. The regression of body measurements on the adjusted primal cuts were significant for later traits. Regression estimates revealed that wither height, body length, rump length, hip bone width, and chest girth are important for primal cut weight and percentage determination. In particular, chest girth was always important for primal cut weight estimates.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.1
• /
• pp.100-105
• /
• 2011

Generally, because received signals from radar are very bulky, the data are divided into manageable size called section, and sections are distributed into several digital signal processors. And then, target detection algorithms are applied simultaneously in each processor. CFAR(Constant False Alarm Rate) algorithm, which is the most popular target detection algorithm, can estimate accurate threshold values to determine which signals are targets or noises within center-cut of section allocated to each processor. However, its estimation precision is diminished in section edge data because of insufficient surrounding data to be referred. Especially this edge problem of CFAR is too serious if we have many sections to be processed, because it causes many false alarms in most every section edges. This paper describes false alarm issues on MCA(Minimum Cell Average)-CFAR, and proposes a false alarm elimination method by changing section size alternatively. Real received data from multi-function radar were used to evaluate a proposed method, and we show that our method drastically decreases false alarms without missing real targets, and improves detection performance.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.7
• /
• pp.557-564
• /
• 1998

A low loss x-cut $LiNbO_3$optical waveguide was fabricated by Yi in-diffusion, and the properties of guided-mode and the total insertion loss of the pigtailed waveguide with polarization maintaining fiber(PMF) were measured at optical wavelength 1550nm. for forming the waveguides, the parameters of diffusion, Ti thickness, waveguide line-width, length, diffusion temperature, time and atmosphere were set $1400{\AA}$, $8{\mu}m$, 3.3cm, $1050^{\circ}C$, 8 hours and wet bubbled oxygen, respectively. And then after the polishing and piatailing, it showed that the total insertion loss was -4.1dB for TM mode, -5.5dB for TE mode, and mode size, that is, the horizontal/ vertical size were $13.8{\mu}m/18{\mu}m$ for TM mode, $9.6{\mu}m/6.5{\mu}m$ for TE mode.

• Journal of Fashion Business
• /
• v.10 no.6
• /
• pp.122-130
• /
• 2006

The purpose of this study is to develop the appropriate brassiere pattern for women. Total of 6 brands with same design and 75A, 80A size brassieres(total 12 brassieres) were compared and analyzed for pattern, cup size and patterns. SPSS 10.1 statistic process was used for data analysis. The outcom of this study is summarized as follows. Total length of brassiere by grade were performed smaller than the standard difference 5cm. For 1/2 front cover length, There were no significant differences between 75 and 80. The reason for lower line of wing is shorter than upper line of wing is because side support is cut side ways considering lower line of wing is sewn more toward front than upper line of wing. Even it is same A cup size most cup related sizes become larger according to underbust comparing with cup capacity, they range from 146.67cc to 172.83cc for same A cups. Among same A cups with difference underbust there was average of 26.16cc differences. For relations of material, sewing technology and expansion rate, all 6 brands had zigzag type sewing for upper line tape. For every 0.3cm height, there were $17{\sim}21$ stitches. When urethane mixture is similar expansion rate is higher while number of 1 inch zigzag are high. For elasticity, zigzag stitch expand side ways for more expansion.

• Korean Journal of Materials Research
• /
• v.29 no.3
• /
• pp.137-142
• /
• 2019

The microstructure, phase, and mechanical properties of three aged porcelain insulators which were manufactured in different years (1973, 1995 and 2008) and which were used in the field for different amounts of time, were investigated. With X-ray 3D computed tomography (CT), defects with ~mm size can be detected without destroying the aged insulators. Defects of small specimens, which are cut from the aged insulators and polished, are analyzed with optical and scanning electron microscopy (OM and SEM), and defects of um size are detected by OM and SEM. The number and size of defects in all the aged insulators are similar. Porcelain insulators manufactured in 1973 contain more $SiO_2$ (quartz and cristobalite) than those manufactured in 2008. Those manufactured in 2008 contain more $Al_2O_3$ than those manufactured earlier. The Vickers hardness of the insulator manufactured in 1973 has the lowest value. The formation of the cristobalite ($SiO_2$) in the insulator manufactured in 1973 which can come from the phase transformation of quartz can cause stress in the insulator by formation of microcracks, which can lead to the low hardness of the insulator.