• 한국의류학회지
• /
• 제20권3호
• /
• pp.452-466
• /
• 1996

The purpose of this study is to proviede basic data for designing sports-brassiere by a questionnaire survey about sports-brassieres preferences and physiological wearing test. The results of the survey and the physiological wearing tests on sports-brassieres are as follow; 1. According to the survey, dissatisfied factors on the sports-brassiere are "drooping and vibrating of the breasts". Preferable factors are supporting breasts by stretch and seldom changing its position by motion. The bigger cup-size and more hemispherical-type causes more discontent than flat-type. 2. The shape of breasts is oval, on what ground, horizontal line is longer than vertical. For the cross section of bust line, shirts type.brassiere is more gently curved than cup-brassiere. 3. The feeling of wearing comfort is correlated with bust.up, shield, close adhesion. The vibration of breasts is correlated with covering urea and close adhesion, and the changing band's position by movement, close adhesion. Too much covering area or strain are in inverse correlation of the comfort. 4. The rate of prevention of vibration is 75~80% on superior sports-brassieres, which has broad covering area and excellent close adhesion. adhesion.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권2호
• /
• pp.177-184
• /
• 2017

The Coanda effect is the phenomenon of a fluid jet to stay attached to a curved surface; when a jet stream is applied tangentially to a convex surface, lift force is generated by increase in the circulation. The Coanda effect has great potential to be applied practically applied to marine hydrodynamics where various lifting surfaces are being widely used to control the behavior of ships and offshore structures. In the present study, Numerical simulations and corresponding experiments were performed to ascertain the applicability of the Coanda effect to a horn-type rudder. It was found that the Coanda jet increases the lift coefficient of the rudder by as much as 52% at a jet momentum coefficient of 0.1 and rudder angle of $10^{\circ}$.

• 한국생활과학회지
• /
• 제10권1호
• /
• pp.73-82
• /
• 2001

The aim of this study is to provide the basic data for clothing construction of pre-school children by the result of the analyses and classifications of children's upper body somatotypes. The objects of this study are the bodies of 220 male pre-school children from 3 to 6 years old. The method of anthropometric measurement is the direct and photographic measurement. After analysing the measurements, 7 factors were extracted and the factors were applied to the cluster analysis. As the results, the 4 types were classified. Type 1 was characterized by the shortest and normal body one among these four types. This type showed the forward-curved back, the projected abdomen, and the fallen shoulders. Type 2 was characterized by the normal height and the fattest body type. Type 3 was characterized by the slimmest body and the shorter height type. Type 4 was characterized by the tallest and normal body with the rising shoulders.

• 한국표면공학회지
• /
• 제53권5호
• /
• pp.227-231
• /
• 2020

This article investigated the effects of stainless steel plate-patterns bonded to aluminum frypan on the thermal distortion and surface temperature of the frypan during gas or induction heating. Two different stainless steel plate-patterns were employed: type A contains only circular holes and type B has not only circular holes but also vacant spaces of 0.5 mm thick and 40 mm long straight line crossing 60 mm long curved line. The bottom of the frypan was distorted during heating when type A stainless steel plate-bonded frypan while no significant thermal distortion was observed for type B stainless steel plate-bonded frypan during heating. Temperature of the frypan surface showed the same trend during gas heating, irrespective of stainless steel plate-patterns. During induction heating, however, the frypan with type B stainless steel plate-pattern showed lower surface temperature than the frypan with type A stainless steel plate-pattern. It is concluded that Type B stainless steel plate-pattern with circular holes and vacant spaces of lines is very effective for minimizing a thermal distortion and lowering the surface temperature of an aluminum frypan during induction heating.

• Journal of Chest Surgery
• /
• 제39권12호
• /
• pp.957-959
• /
• 2006

근육보존 개흉술은 경감된 술 후 통증, 근력의 보존 및 미용상 이점 때문에 후측방 개흉술의 대안으로 알려져 있으며, 굽은액와 개흉술은 근육보존 개흉술의 일종이다. 2003년 7월부터 2004년 8월 사이에 국립의료원 흉부외과에서 굽은액와 개흉술을 시행 받은 동맥관개존증 환자 5명을 대상으로 하였으며, 결과들을 임상기록을 통하여 후향적으로 분석하였다. 시행한 수술은 동맥관 결찰술 4예, 동맥관 분리술 1예였고, 술 후 합병증은 없었다. 굽은액와 개흉술은 근육보존 및 미용 효과의 장점을 가지면서 동맥관개존증 수술에서 응용될 수 있는 개흉 방법이라고 생각된다.

• Journal of Ginseng Research
• /
• 제36권3호
• /
• pp.314-321
• /
• 2012

The purpose of this study was to determine a standard quality characteristic through the evaluation and statistical analysis of the morphological characteristics of dried ginseng (white ginseng) products. Samples of 4-year-old 30 and 50 piece grade curved ginseng and 5-year-old 25 and 15 piece grade straight ginseng products were collected from a market, with 5 to 10 packs of each product being collected annually over a 5-year period (2006-2010). Morphological characteristics, such as weight, length, diameter, and surface color, were measured and statistically analyzed to present a standard quality characteristic value using $mean{\pm}3SD$, a range that excluded outlier. The 4-year-old curved ginseng samples of 50 and 30 piece grade were 4.80 to 6.12 cm and 5.28 to 7.60 cm long, 0.22 to 1.70 cm and 0.21 to 2.07 cm wide, and weighed 5.28 to 7.40 g and 8.62 to 12.26 g, respectively. The 5-year-old straight ginseng samples of 25 and 15 piece grade were 9.66 to 15.47 cm and 10.66 to 16.80 cm long, 1.32 to 1.94 cm and 1.48 to 2.43 cm wide, and weighed 9.18 to 16.40 g and 15.89 to 24.82 g, respectively. The surface color of the different piece grades in the same type of dried ginseng product was similar, whereas the straight ginseng demonstrated a lower level of brightness, but the relative redness and yellowness were of higher levels, than that of curved ginseng.

• 한국항공우주학회지
• /
• 제30권5호
• /
• pp.94-100
• /
• 2002

본 논문은 곡면형 압전 복합재료 작동기 LIPCA의 개발 및 성능 실험에 관한 것이다. LIPCA는 압전 세라믹을 중심으로 상층부는 탄성계수가 크면서 열팽창계수가 낮은 섬유강화 복합재료층이 위치하며, 하층부는 탄성계수가 작으면서 열팽창계수가 큰 섬유강화 복합재료층이 위치한다. 작동기의 성능 검증을 위해 작동지그 및 전압 공급 장치 그리고 비접촉 레이저 센서로 이루어진 실험 시스템을 구성하였다. 성능 실험은 양단 단순지지상태에서 압전 재료의 전극에 $100\sim400V_{pp}$의 교류 전압을 1Hz로 가하였을 경우 작동기 중앙부에서 발생하는 수직방향의 변위를 측정하는 것으로 수행하였다. LIPCA와 THUNDER의 성능 검증 결과 LIPCA-C2는 THUNDER에 비해 34% 경량화 되었으며, 작동변위는 13% 향상되었다.

• 한국환경복원기술학회지
• /
• 제11권5호
• /
• pp.92-103
• /
• 2008

Development of new approaches to achieve naturally good ecological potential of forest road cut-slope by making the best use of advantages of gabion systems with vegetation base materials to prevent slope failure and erosion, in the area with highly erodible soil. As a result on the type analysis of gabion systems already installed in road cut-slopes, gabion systems were generally established to prevent slope failure. Existing gabion systems can be divided into monolithic and modular system and can be divided into ten subtypes according to the purpose of establishment and combination of other measures. As a result on the monitoring of erosion amount from forest road cut-slopes in the test applications, the order of erosion amount from largest to smallest is as follows : the curved road cut-slope site where normal gabion system was established ($7,911cm^3$); the control site ($7,632cm^3$); the straight road cut-slope site where normal gabion system was established ($7,301cm^3$); the curved road cut-slope site where the new gabion system was established ($5,684cm^3$); and the straight road cut-slope site where the new gabion system ($5,325cm^3$). Therefore, the result shows that the new gabion system is more effective than the normal gabion system to reduce erosion amount from forest ! road cut-slopes. During the study period, vegetation coverages of the straight and curved road cut-slope site where the new gabion system was established were about 45% and about 36%, so average vegetation coverage of the sites where the new gabion systems was established was higher than the sites where the normal gabion systems was established. Therefore, it was concluded that the new gabion system can be more effective for cut-slope revegetation.

• 한국구조물진단유지관리공학회 논문집
• /
• 제9권1호
• /
• pp.159-170
• /
• 2005

격자구조는 병렬하는 주거더에 횡거더로 접합된 구조를 말하며 집중하중이 재하될 때 하중이 주거더만 부담하지 않고 횡거더를 통하여 다른 주거더로 하중이 일부를 부담하게 된다. 격자형의 교량은 과다한 집중하중을 분산시켜 내하력이 높은 특성을 갖고 있으며 사용재료를 절약할 수 있어 경제적이다. 본 연구에서는 해석절차가 간단하고 이해가 쉬운 전달행렬법을 이용하여 격자교의 프로그램을 작성하여 Leonhardt, Szabo, FEM, 양창현 및 정진환의 해석결과와 비교하였다. 또한, 경사각을 갖는 직선격자교와 곡선격자교의 특성을 분석하였고, 경사각과 휨강도/비틀림강도의 비에 따른 직선격자교와 곡선격자교의 단면력을 분석하였다.

• 대한건축학회논문집:계획계
• /
• 제35권9호
• /
• pp.89-99
• /
• 2019

In the representation of buildings with continuous changes in the curved shape of the surface, countless plans or sections are required, or none of the traditional drawings can explain the geometry of it. In other words, in no case can an ordinary drawing achieve the efficient and clear communication capability which is inherent function of the drawings. As a result, the current architects are introducing their own way of drawing technique which is developed in accordance with a specific curved shape, construction method or company resources, but this is not what can be applied to other cases because it has not been ever shared or agreed in the industry. In this process, the drawing or construction of curved building has been recognized as the exclusive property of a specific expert, or the design and construction without the in-depth understanding of the technology have resulted in the appearance of poor buildings. Therefore, this study aims to present an elements and method that can convey shape information more effectively and clearly in the drawing representation of non-linear buildings and, thus, contributes to lowering the barriers to entry into the field by providing the information to be easily applied to related projects. In order to attain this goal, the drawings of recently completed projects of free form building are analyzed to reveal the method used to effectively express the shape information of the building and to derive new drawing elements that have not been applied to the existing drawings.