• The Journal of Fisheries Business Administration
• /
• v.39 no.1
• /
• pp.87-114
• /
• 2008

The cultured tuna production which has suddenly expanded at the short time and the demand for it attract attention. Farming mode, distribution transactions, change of the market (domestic and international) and the price trend are reviewed from the Japan's position which is the biggest consuming country. This paper tries to describe the current status of the food system related to the cultured tuna. Japanese government began the development of the tuna culture technology in 1970. It was by the Fisheries Agency's project. Kinki University which is the large scale private university in Japan participated in the project. After that, 32 years have passed. Kinki University established the full farming of the bluefin tuna in August, 2002. On the other hand, in 1974, one Japanese private enterprise began its tuna farming business in Canada. Kinki University gave this company technical cooperation. Also, in the early stages of the 90s, as for the policy of the overseas fishery cooperation foundation, it supported the tuna farming business in Australia. It is very clear to understand that the long-term technological-development has supported the take-off scene of the tuna culture business not only in foreign countries but also in Japan. The total shipment scale of the cultured tuna expanded very much within about 10 recent years. However, the decrease of the wild tuna catch, the reinforcement of the fisheries regulation and the tuna body to dwarf are remarkable now. Under the condition as the mentioned above, Japan's tuna consumption, especially, in the market at the fatty meat of tuna of the cultured tuna is building up firm status. At present, the Mediterranean Sea coastal countries, Australia, Mexico and Japan have the tuna farming sites. Australia farms the southern bluefin tuna. The others do the bluefin tuna. About for 3 years, Japan farms the juvenile of the tuna. The global production areas are as follows. 8 coastal countries of the Mediterranean Sea; 18,000 tons (61 % of the cultured tuna quantity in foreign countries), Mexico; 4,500 ton (15%), Australia; 7,000 tons (24%). In 2003, Japan has 32 managements and 39 offices for tuna farming. In Japan, Kyushu and Okinawa district, the share shows itself as 80 % of the domestic production quantity. Especially, the share of Amami-oshima Island in Kagoshima Prefecture exceeds 60 %. Therefore, this island has the maximum production scale of Japan. The amount of supply of BT and SBT was 56,000 tons in 2004. In Abroad, the tuna farming business forms a fixed connection between the importer and the wholesaler which have their office in Japan. In the field of the capital composition, the payment in advance, transaction and the way of settlement, each maintains their fixed relation. The market conditions of the cultured tuna are supported by "the decline of price level" and "the expansion of the general public consumption segment". These lead a team merchandising, and it is supported by the fixed business connection of each. This makes the profit of each business which are on the cultured tuna distribution. However, they have competition on the power balance among them.

• Current Research on Agriculture and Life Sciences
• /
• v.10
• /
• pp.19-33
• /
• 1992

This paper was investigated to know that the effect and mode of action of essential oil of Acorus calamus L. and Acours gramineus Soland on motility of isolated rabbit jejunum segment. The results were as follows : 1. Both essential oil of Acorus calamus L. and Acorus gramineus Soland were showed relaxant effect on motility of isolated rabbit jejunum segment and this relaxant effect was augmentated in proportion to increase of concentration of essential oil. 2. ED 50 of essential oil of Acorus calamus L. and Acorus gramineus Soland were 0.0045%, 0.0035%, respectively. 3. The relaxed rabbit jejunum segments by eseential oil of Acorus calamus L. and Acorus gramineus Soland were recovered by carbachol, pilocarpine, and barium chloride but partially recovered by histamine. 4. The contracted rabbit jejunum segmants by carbachol, pilocarpine, histamine and barium chloride were relaxed by essential oil of Acorus calamus L. and Acorus gramineus Soland. In conclusion, it is thought that essential oil of Acorus calamus L. and Acorus gramineus Soland were relaxed the motility of isolated rabbit jejunum segment by neurotropic and musculotropic action.

• Journal of the Korean Society of Costume
• /
• v.18
• /
• pp.373-381
• /
• 1992

Woman in Choson era had various kind of accdssories like rings, ear ring, ornamentak hairpins and so on. Among them their favorite was the Norigae, the pendent trinket. With the embroidered ornament at its center, beads and knots were attached to the upper and lower part, and it was hung with a tassel. It was carried on the string of the Chogori. norigae oreginated in waist string of Three Countries era(Sills, Paekje and Koguryo) ; had been changed with the development of fashion, embroidery and the influence of Buddhistic culture. The differences between Embroidered Norigae and Norigae are following. If the ornament at its center is made of such jewels as gold, silver, jade and the like, it is called Norigae. But if the ornament at its center is made of the embroidered Norigae. Such a Embroidered Norigae in which perfume was contained, was as a perfume box or a perfume bag and was carried on the strings of Chogori by Danjak(single work). The Differences between ancient Embroidered Norigae of late Choson era and modern Embroidered Norigae are Following; 1) The type of main body-the embroidered ornament at its center was mainly embroidered with the shape of animals in both of ancient Embroidered Norigae was usually formes like a bat and that of modern Embroidered Norigae like butterfly. 2) plants were adapted as the main design of ancient Embroidered Norigae, but plants and animals as that of modern Embroidered Norigae. 3) The colors of the background and the design are usually red in both ancient and modern Embroidered norigae. 4) The tassels of ancient Embroidered Norigae were mode in the shape of srick and a strawberry. but the tassels of modern Embroidered Norigae were mainly made in the shape of a stick. 5) Nowadays the beauty of external form is considered more important while the symbol of main body was considered more important in Choson era. 6) The role of Thidon in the composition of Embroidered Norigae is declined and a lot of main bodies are used in modern Embroidered Norigae. 7) Modern Korean people are apt to choose Embroidered Norigae depending upon the design of main body and the traditional Korean beauty. 8) Modern people who desire to get new thing, try to make the design of main body various. As their cognition of Korean tradition is of the increase, the restoration of ancient Embroidered Norigae to its original form has been accom

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.2
• /
• pp.16-23
• /
• 2006

This paper presents a novel single-stage high frequency resonant inverter link type DC-DC converter using zero voltage switching with high power-factor. The proposed topology is integrated half-bridge boost rectifier as power factor corrector(PFC) and half-bridge high frequency resonant converter into a single-stage. The input stage of the half-bridge boost rectifier works in discontinuous conduction mode(DCM) with constant duty cycle and variable switching frequency. So that a boost converter makes the line current follow naturally the sinusoidal line voltage waveform. Simulation results have demonstrated the feasibility of the proposed high frequency resonant converter. Characteristics values based on characteristics analysis through circuit analysis is given as basis data in design procedure. Also, experimental results are presented to verify theoretical discussion. This proposed inverter will be able to be practically used as a power supply in various fields as induction heating applications, fluorescent lamp and DC-DC converter etc.

• Current Research on Agriculture and Life Sciences
• /
• v.12
• /
• pp.29-34
• /
• 1994

A leading sweet pepper cultivar, Keystone Resistant Giant #3, was crossed with a line with resistance to Phytophthora capsici, PI201232, for incorporation of the resistance and to study the inheritance of resistance to the disease. Seedlings of parents, $F_1$, $F_2$ and backcross populations of a cross between Keystone Resistant Giant #3 and PI201232 were inoculated with zoospore suspension of P. capsici at 36 days after seeding. Most of the $F_1$ seedlings survied the inoculation and this suggested that resistance is dominant over susceptibility. The number of survived plants in $F_2$ population was, however, much less than the killed. All the plants in a backcross to Keystone Resistant Giant #3 were killed. Therefore, the observed numbers did not fit the expected ratio for segregation of one or two dominant alleles as previously reported. The resistance to P. capsici appeared to be inherited in a quantitative mode in evaluation of root rot. Resistant individuals in $F_2$ population were selected and a breeding program for incorporation of the resistance to P. capsici by backcross method is continued.

• Current Research on Agriculture and Life Sciences
• /
• v.12
• /
• pp.23-28
• /
• 1994

A leading sweet pepper cultivar, Keystone Resistant Giant #3, was crossed with a line with resistance to Xanthomonas campestris pv. vesicatoria, PI271322, for incorporation of the resistance and to study the inheritance of resistance to the disease. Seedlings of parents, $F_1$, $F_2$ and backcross populations of a cross between Keystone Resistant Giant #3 and PI271322 were inoculated with race 1 and race 3 of Xanthamonas campestris pv. vesicatoria by infiltrating bacterial suspension into abaxial side of leaves. PI271322 was carrying a gene ($Bs_3$) for hypersensitive resistance to race 1 of X. c. pv. vesicatoria and also a component of non-hypersensitive resistance to race 3 inheriting in a quantitative mode. Correlation coefficient between disease indices to race 1 and race 3 of non-hypersensitive plants in $F_2$ population was highly significant, thus indicating that a component of non-hypersensitive general resistance in PI271322 acted consistently to both races. Individual plants with resistance to both race 1 and race 3 of X. c. pv. vesicatoria were selected and a breeding program for incorporation of the resistance is continued.

• The Korean Journal of Mycology
• /
• v.44 no.1
• /
• pp.36-47
• /
• 2016

This study was conducted to evaluate five different strains of rhizobacterial isolates viz. PA1, PA2, PA4, PA5 and PA12 for biological control against Colletotrichum acutatum, C. coccodes, C. gloeosporioides, C. dematium, Botrytis cinerea, Rhizoctonia solani, Sclerotinia minor and Fusarium sp. In vitro inhibition assay was performed on three different growth mediums, potato dextrose agar (PDA), tryptic soy agar (TSA), and PDA-TSA (1:1 v/v) for the selection of potential antagonistic isolates. According to the result, isolate PA2 showed the highest inhibitory effect with 65.5% against C. coccodes on PDA and with 96.5% against S. minor on TSA. However, the same isolate showed the highest inhibition with 58.5% against C. acutatum on PDA-TSA. In addition, an in vivo experiment was performed to evaluate these bacterial isolates for biological control against fungal pathogens. Plants treated with bacteria were analyzed with phytopathogens and plants inoculated with phytopathogens were treated with isolates to determine the biological control effect against fungi. According to the result, all five isolates tested showed inhibitory effects against phytopathogens at various levels. Mode of action of these rhizobacterial isolates was evaluated with siderophore production, protease assay, chitinase assay and phosphate solubilizing assay. Bacterial isolates were identified by 16S rDNA sequencing, which showed that isolates PA1 and PA2 belong to Bacillus subtilis, whereas, PA4, PA5, and PA12 were identified as Bacilus altitudinis, Paenibacillus polymyxa and Bacillus amyloliquefaciens, respectively. Results of the current study suggest that rhizobacterial isolates can be used for the plant growth promoting rhizobacteria (PGPR) effect as well as for biological control of various phytopathogens.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2430-2434
• /
• 2005

Automatic FPC punching instrument for the improvement of working condition and cost saving is introduced in this paper. FPC(flexible printed circuit) is used to detect the contact position of K/B and button like a cellular phone. Depending on the quality of the printed ink and position of reference punching point to the FPC, the resistance and current are varied to the malfunctioning values. The size of reference punching point is 2mm and the above. Because the punching operation is done manually, the accuracy of the punching degree is varied with operator's condition. Recently, The punching accuracy has deteriorated severely to the 2mm punching reference hall so that assembly of the K/B has hardly done. To improve this manual punching operation to the FPC, automatic FPC punching system is introduced. Precise mechanical parts like a 5-step stepping motor and ball screw mechanism are designed and tested and low cost PC camera is used for the sake of cost down instead of using high quality vision systems for the FA. 3D Mechanical design tool(Pro/E) is used to manage the exact tolerance circumstances and avoid design failures. Simulation is performed to make the complete vision based punching machine before assembly, and this procedure led to the manufacturing cost saving. As the image processing algorithms, dilation, erosion, and threshold calculation is applied to obtain an exact center position from the FPC print marks. These image processing algorithms made the original images having various noises have clean binary pixels which is easy to calculate the center position of print marks. Moment and Least square method are used to calculate the center position of objects. In this development circumstance, Moment method was superior to the Least square one at the calculation of speed and against noise. Main control panel is programmed by Visual C++ and graphical Active X for the whole management of vision based automatic punching machine. Operating modes like manual, calibration, and automatic mode are added to the main control panel for the compensation of bad FPC print conditions and mechanical tolerance occurring in the case of punch and die reassembly. Test algorithms and programs showed good results to the designed automatic punching system and led to the increase of productivity and huge cost down to law material like FPC by avoiding bad quality.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.4
• /
• pp.54-62
• /
• 2018

As a part of realization of artificial intelligence signal(AI Signal), this study proposed an actuated signal algorithm based on vehicle queue length that estimates in real time by deep learning. In order to implement the algorithm, we built an API(COM Interface) to control the micro traffic simulator Vissim in the tensorflow that implements the deep learning model. In Vissim, when the link travel time and the traffic volume collected by signal cycle are transferred to the tensorflow, the vehicle queue length is estimated by the deep learning model. The signal time is calculated based on the vehicle queue length, and the simulation is performed by adjusting the signaling inside Vissim. The algorithm developed in this study is analyzed that the vehicle delay is reduced by about 5% compared to the current TOD mode. It is applied to only one intersection in the network and its effect is limited. Future study is proposed to expand the space such as corridor control or network control using this algorithm.

• Progress in Medical Physics
• /
• v.19 no.1
• /
• pp.42-48
• /
• 2008

Bio-implantable devices such as heart pacers, gastric pacers and drug-delivery systems require power for carrying out their intended functions. These devices are usually powered through a battery implanted with the system or are wired to an external power source. This paper describes an inductive power transmission link, which was developed for an implantable stimulator for direct stimulation of denervated muscles. The carrier frequency is around 1MHz, the transmitter coil has a diameter of 46mm, and the implant coil is 46mm. Data transmission to the implant with amplitude shift keying (ASK) and back to the transmitter with passive telemetry can be added without major design changes. We chose the range of coil spacing (2 to 30mm) to care for lateral misalignment, as it occurs in practical use. If the transmitter coil has a well defined and reliable position in respect to the implant, a smaller working range might be sufficient. Under these conditions the link can be operated in fixed frequency mode, and reaches even higher efficiencies of up to 37%. The link transmits a current of 50 mA over a distance range of 2-15 mm with an efficiency of more than 20% in tracking frequency. The efficiency of the link was optimized with different approaches. A class E transmitter was used to minimize losses of the power stage. The geometry and material of the transmitter coil was optimized for maximum coupling. Phase lock techniques were used to achieve frequency tracking, keeping the transmitter optimally tuned at different coupling conditions caused by coil distance variations.