• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.6
• /
• pp.654-661
• /
• 2005

Copper is a well known alloying element that is used to improve the resistance to general corrosion of stainless steel And also Cu cation have the anti-fouling effect to inhibit adhesion of the marine algae and shellfish to the surface of heat exchanger cooling pipe or outside wall of the ship, Therefore there are some anti-fouling methods such as anti-fouling Paint mixed with copper oxide or MGPS(Marine Growth Preventing System) by using Cu cation dissolved to the sea wather solution. Cu cation can be dissolved spontaneously by galvanic current due to Potential difference between Cu and cooling pipe of heat exchanger with Ti material, which may be one of the anti-fouling designs. In this study the effect of annealing heat treatment to galvanic current and Polarization behavior was investigated with a electrochemical points of view such as measurement of corrosion Potential, anodic polarization curve. cyclic voltammetric curve, galvanic current etc The grain size of the surface in annealed at $700^{\circ}C$ was the smallest than that of other annealing temperatures. and also the corrosion Potential showed more positive potential than other annealing temperatures. The galvanic current between Ti and Cu with annealed at $700^{\circ}C$ was the largest value in the case of static condition. However its value in the case of flow condition was the smallest than the other temperatures. Therefore in order to increase anti-fouling effect by Cu cation, the optimum annealing temperature in static condition of sea water is $700^{\circ}C$, however non- heat treated specimen in the case of flow condition may be desirable.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.527-528
• /
• 2017

Current-voltage characteristics of source-overlapped gate tunnel field-effect transistor (SOG-TFET) with different channel doping concentration are proposed. Due to the gaussian doping in which the channel region near the source is highly doped and that far from the source is lightly doped, the ambipolar current was reduced, compared with the uniformly-doped SOG-TFET. On-current is almost similar in P-P-N and P-I-N structure but subthreshold swing (SS) of P-P-N TFET enhanced 5 times higher than those of P-I-N TFET. off-current and ambiploar current of the proposed SOG-TFET decrease 10 times and 100 times than those of the uniformly-doped SOG-TFET.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.2
• /
• pp.339-341
• /
• 2012

The high Tc superconductor of YBCO system with the nominal composition of precursor was prepared from mixed powders of $Y_2O_3$, $BaCO_3$, CuO and $TiO_2$ by the thermal pyrolysis method. The effect of $TiO_2$ doping to Y based ceramics superconductors fabricated by the thermal pyrolysis reaction, to investigate the effect of the dopant on the superconductivity. The voltage appearing across the field-cooled HTS sample increased with external magnetic field. The improvement of critical current property as well as the mechanical property is important for the application. The improvement of the critical current can be achieved by forming the nano size defect working as a flux pining center inside the superconductor. We simply added $TiO_2$ to starting materials to dope $TiO_2$ and observed an increase in the trapped field and the critical current density up to at least 5 wt % $TiO_2$. The $TiO_2$ was converted to fine $BaTiO_3$ particles which were trapped in YBCO matrix during the sintering process. We observed a peak effect of Jc that can be attributed to $TiO_2$ doping and results suggest that introducing a proper amount of pinning centers can significantly enhance current density.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.314-317
• /
• 1991

The waveforms of high voltage and current pulse were measured using laser measuring systems. Existing potential transformer and current transformer have low measuring precision because of resonance phenomena and waveform distortion due to the magnetic saturation. But using laser measurement, it is possible to obtain clear waveforms which have no effect of distortion and harmonic resonances. And electromagnetic interferences (EMI) in the measuring of high voltage and current pulse, but the optical measuring systems are not subjet to the influence of EMI. Using laser measuring systems based upon Pockels effect and Faraday effect is not free from any errors yet, but it could replace existing measuring systems by routine experiments and error corrections. And it needs that more research and development of optical crystals and equipments would be taken.

• Progress in Superconductivity
• /
• v.5 no.1
• /
• pp.5-8
• /
• 2003

We studied the effect of spin injection on tunneling conduction properties of intrinsic Josephson junctions formed in $Bi_2$$Sr_2$$CaCu_2$$O_{ 8＋x}$ single crystals. properties of an identical stack (10${\times}$5.0${\times}$0.030 $\mu\textrm{m}^3$) of intrinsic Josephson junctions were compared for the bias current injected through Au and Co electrodes. The suppression of the superconducting gap in the $_2$ double layers and the interlayer Josephson critical current was manifested in the tunneling current-voltage characteristics of the stacks. This effect appears to be caused by the pair breaking associated with spin-polarized carriers injected from the Co electrode into the $Bi_2$$Sr_2$$_2$O$CaCu_{ 8＋x}$ single crystal. This study may provide valuable information on clarifying the mechanism of high- $T_{c}$ superconductivity.y.y.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.5
• /
• pp.2014-2020
• /
• 2017

A compact current model applicable to both single-gate (SG) and double-gate (DG) tunneling field-effect transistors (TFETs) is presented. The model is based on Kane's band-to-band tunneling (BTBT) model. In this model, the well-known and previously-reported quasi-2-D solution of Poisson's equation is used for the surface potential and length of the tunneling path in the tunneling region. An analytical tunneling current expression is derived from expressions of derivatives of local electric field and surface potential with respect to tunneling direction. The previously reported correction factor with three fitting parameters, compensating for superlinear onset and saturation current with drain voltage, is used. Simulation results of the proposed TFET model are compared with those from a technology computer-aided-design (TCAD) simulator, and good agreement in all operational bias is demonstrated. The proposed SG/DG-TFET model is developed with Verilog-A for circuit simulation. A TFET inverter is simulated with the Verilog-A SG/DG-TFET model in the circuit simulator; the model exhibits typical inverter characteristics, thereby confirming its effectiveness.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.6
• /
• pp.1044-1055
• /
• 1997

To find out generating mechanism of eddies in the polar frontal zone of the East Sea, we carried out a series of numerical experiments using the nonlinear $1^{1/2}-layer$ model allowing the effect of the polar front. We assumed the polar front at about $39^{\circ}N$ in zonal direction with the cold water region in the northern part and the warm water region in the southern part of the model ocean. To examine the effect of the frontal motion without the influence of the Tsushima Current from the beginning of the geostrophic adjustment, the initial state of the model ocean was assumed motionless. Eastward current was caused by the geostrophic adjustment process in the polar frontal zone that induced a steady northward coastal current along the Korean coast to satisfy the mass continuity. The overshooting of this coastal current acted as an initial disturbance of the zonal flow field which caused meanders and eddies. The spatial scales of eddies were in good agreement with the baroclinic instability theory.

• The Korean Journal of Physiology and Pharmacology
• /
• v.4 no.1
• /
• pp.9-14
• /
• 2000

$K^+$ currents play multiple roles in the excitability of dorsal root ganglion (DRG) neurons. Influences on these currents change the shape of the action potential, its firing threshold and the resting membrane potential. In this study, whole cell configuration of patch clamp technique had been applied to record the blocking effect of capsaicin, a lipophilic alkaloid, on the delayed rectifier $K^+$ current in cultured small diameter DRG neurons of adult rat. Capsaicin reduced the amplitude of $K^+$ current in dose dependent manner, and the concentration-dependence curve was well described by the Hill equation with $K_D$ value of $19.1{\mu}M.$ The blocking effect of capsaicin was reversible. Capsaicin $(10 {\mu}M)$ shifted the steady-state inactivation curve in the hyperpolarizing direction by about 15 mV and increased the rate of inactivation. The voltage dependence of activation was not affected by capsaicin. These multiple effects of capsaicin may suggest that capsaicin bind to the region of $K^+$ channel, participating in inactivation process.

• Journal of the Korean institute of surface engineering
• /
• v.19 no.2
• /
• pp.59-64
• /
• 1986

Pulse current was empolyed to the chromium electroplating bath of self-regulating high speed in the following range of conditions; 10-80$^{\circ}C$, 0-400A/$dm^2$, 10-100KHz. The current efficiency was compared with that of a conventional direct current plating in respect of current density and electrode interdistance. The effect of pulse current was found to increase the current efficiency at least 10-20 percent more than the conventional direct current plating in the high current density more than 100A/$dm^2$ and at 3-4mm of electrode interdistance. The surface appearance was also studied and known to be of great influenced by pulse frequency.

• Journal of the Korean institute of surface engineering
• /
• v.46 no.1
• /
• pp.9-15
• /
• 2013

The effect of the additionally applied electrical current on the adhesion strength between electroless Cu and polyimide films was investigated. Peel tests were performed after applying electrical current within the range from 0.1 to 100 mA for the duration from 1 to 30 minutes. Sample with more than 1 mA of additional electrical current for 1 minute showed higher adhesion strength than that without additional electrical current. However, samples with 10 mA of additional electrical current for more than 10 miniutes showed the degradation of adhesion strength. Ra and RMS values of the peeled polyimide surface were proportional to the adhesion strength though there were no significant changes in the morphology of the peeled surfaces with varied amount and time-length of additional electrical current. Applying electrical current could increase the density of chemical bonding, which results in increase of the adhesion strength between copper and polyimide. However, in the case of applying additional electrical current for excessive amount or time, the degradation of the adhesion strength owing to the formation of copper oxide at the interface could occur.