• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.5
• /
• pp.152-158
• /
• 1996

A novel resonant pulse control technique which generates high-quality sinusoidal output voltage from a resonant dc link inverter is presented for UPS applicatons. The proposed control technique limits resonant voltae overshoot without any passive or active clamp circuit, resulting in resonant pulses iwth uniform amplitude and high efficiency. The output voltage is controlled by the third order contorller iwth an inner loop of th efilter inductor current and the feedforward controller. Analysis and design of the proposed control technique are illustrated and verified on a 5kVA experimental unit.

• Proceedings of the KIPE Conference
• /
• 2017.11a
• /
• pp.109-110
• /
• 2017

본 논문에서는 듀얼 액티브 브릿지에서 SPWM(Single Pulse Width Modulaton)과 DPWM(Dual Pulse Witdh Modulation)을 적용하였을 때, 인덕터 전류의 특성을 비교하고자 한다. 인덕터 전류의 특성을 이론적으로 분석하고, 실험을 통해서 결과를 분석하였다.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.228-230
• /
• 2004

This paper describes a new method of detecting rotor position in switched reluctance motor(SRM). Some strategies of position sensorless control methods for the motor include the measurement of phase current and applied pulse voltage in an unexcited phase. The principle of the estimation of a rotor position is based on the detection of inductance by pulse currents. Suggested method is verified by some experimental tests.

• Proceedings of the KIEE Conference
• /
• 1988.11a
• /
• pp.9-12
• /
• 1988

This paper shows a asymmetrically controlled method for the simultaneous control of real and reactive power generated by Superconducting Magnetic Energy Storage (SMES). Asymmetrically controled 12 pulse converter has been proposed in this paper for harmonic reduction of transformer primary current.

• 전기의세계
• /
• v.26 no.3
• /
• pp.63-68
• /
• 1977

In this paper, the theory of pulse frequency modulated DC/DC power converter to obtain constant output voltage for all input voltage changes is discussed. The switch controller consisting of integrator and comparator determines the ON time of power switch-Thyristor-by the error between the load voltage and a load reference voltage. Resulting voltage and current waveforms have been studied theoretically in detail and verified experimentally for a resistive and inductive load condition. State equations for voltages and currents using binary logic variables are computed by digital computer. Comparison of these withe oscillograms obtained from an experimental model shows very close agreement.

• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.247-250
• /
• 2002

This paper proposes a PWM circuit using CMOS OTAs. The features of the proposed PWM circuit are IC oriented circuits, simple configuration, and bias current controlled output. In order to verily the validity of the proposed circuit, it is simulated by H-SPICE program. Futhermore, the proposed circuit is integrated on chip using 0.35 $\mu\textrm{m}$ CMOS technology.

• Proceedings of the KIEE Conference
• /
• 1990.07a
• /
• pp.447-450
• /
• 1990

Nonlinear protection of overcurrent induced on parallel two-wire transmission line by electromagnetic pulse is analyzed. This algorithm is implemented numerically and simulation result for simple incident pulse and nonlinear type agrees with its analytic solution.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.32 no.8
• /
• pp.277-283
• /
• 1983

The pulse generating circuit system of the so-called turbulently-heated theta pinch is experimentally investigated, and its results are compared with the predictions based on the conventional theory. The conventional theory assumes that the impedance of the pinch coil is independent on the time rate of change in voltage (or current) across the pinch coil. The experimental pulse height of the voltage actross the pinch coil is about 1.5% fo that predicted by the conventional theory.

• Proceedings of the KIEE Conference
• /
• 1998.07f
• /
• pp.1869-1871
• /
• 1998

In this paper, we designed and fabricated a fast switching system for high power pulse. This system consists of a voltage conversion circuit, high voltage charging circuit, trigger circuit, and discharging circuit. Especially discharging line is designed by strip-line for low inductance and resistance. The experimental result is that current slew rate of the system is 6.67kA/86ns and this result is fully qualified for initiating EBW or EFI

• Proceedings of the KWS Conference
• /
• 2005.06a
• /
• pp.317-320
• /
• 2005

In this paper, dynamic behaviour of short circuit occurring in Pulse Gas Metal Arc Welding (GMAW-P) is investigated Welding experiments with different values of pulsing parameters, high speed camera pictures and welding signals such as current and voltage were acquired to identify short circuit conditions in GMAW-P.