• Journal of Power Electronics
• /
• v.8 no.2
• /
• pp.109-120
• /
• 2008

In this paper, a novel delta/double-fork transformer based 18-pulse full-wave AC-DC converter is designed, modeled, simulated and developed to feed isolated DC varying loads. The proposed AC-DC converter is used for low voltage and large current DC loads in applications such as electrowinning, where isolation is required mainly for stepping down the supply voltage. The proposed converter improves power quality at AC mains and meets IEEE-519 standard requirements at varying loads.

• Current Optics and Photonics
• /
• v.6 no.6
• /
• pp.576-582
• /
• 2022

Plasmonic high-order harmonic generation (HHG) is used in nanoscale optical applications because it can help in realizing a compact coherent ultrashort pulse generator on the nanoscale, using plasmonic field enhancement. The plasmonic amplification of nanostructures induces nonlinear optical phenomena such as second-order harmonic generation, third-order harmonic generation, frequency mixing, and HHG. This amplification also causes damage to the structure itself. In this study, the plasmonic amplification according to the design of a metal-coated sapphire conical structure is theoretically calculated, and we analyze the effects of this optical amplification on HHG and damage to the sample.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.372-375
• /
• 1996

In this paper, a new active interphase reactor for twelve-pulse diode rectifiers is proposed. The proposed system draws near sinusoidal currents from the utility. In this scheme, a low kVA(0.02 $P_o$ (PU)) active current source injects a triangular current into an interphase reactor of a twelve-pulse diode rectifier. The modification results in near sinusoidal input current with less than 1% THD. Experimental results are provided from a 208V, 10kVA rectifier system.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.482-485
• /
• 1996

In this paper, a predictive current control of 12-pulse parallel connected dual converter system without interphase reactors(IPR) is presented. Firstly, the characteristics of system without IPR are analyzed and compared with that of system with IPR. And the predictive current control of this system is discussed. Finally the validity of the presented system and the excellence of the predictive current control response is proved through the simulation results.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.591-599
• /
• 2001

The paper identifies a severe form of core saturation instability in an DC/AC interaction system. It then seeks solutions to the problem by HVDC control means. This is achieved by a proper design of the Voltage Dependent Current Order Limiter (VDCOL), the Current Regulator and Timing Pulse generator. Supplementary control loops have also been introduced to result in a satisfactory performance as compared to that obtained one with the use of uncharacteristic harmonic filter on the AC side. Robustness of all the options has been demonstrated through recovery performance of the DC link in response to both I-phase and 3-phase 5 cycle faults on both rectifier and inverter commutating buses.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.276-280
• /
• 1998

This paper proposes a harmonic a harmonic reduction technique of the parallel-connected twelve-pulse thyristor rectifiers. The proposed system is an improvement over the diode rectifier system with an active interphase reactor [2]. In this scheme, a low KVA (0.15 Po (PU) ) active current source injects a triangular current into an interphase reactor of a twelve-pulse thyristor rectifier along the phase delay angle. The current injection results in near sinusoidal input current with less than 1% THD. Detailed analysis of the proposed scheme along scheme along with design equations is illustrated. Simulation results verify the concept.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.677-681
• /
• 2005

This Paper presents a 6 pulse shift operation control mode of current-source-inverter to make improvement of efficiency and to reduce the frequency of inverter switching for photovoltaic generation system using PWM current-source-inverter. This system is connected solar cell energy directly without using a storage cell. The proposed circuit can maintain maximum voltage of photovoltaic generation of take advantage of six Buck-Boost converter and a full-bridge inverter determines the polarity of AC output. That is controlled by using digital signal processor TMS320F2812 for operation about a 6 pulse shift operation control of current-source-inverter, and it is verified through the experimental results.

• Journal of Power Electronics
• /
• v.2 no.4
• /
• pp.297-304
• /
• 2002

The paper identifies a severe form of core saturation instability in a DC/AC interaction system. It then seeks solutions to the problem by HVDC control means. This is achieved by a proper design of the Voltage Dependent Current Order Limiter (VDCOL), the Current Regulate. and Timing Pulse generator. Supplementary control loops have also been introduced to result in a satisfactory performance as compared to that obtained one with the use of uncharacteristic harmonic filter on the AC side. All the options have been demonstrated through recovery performance of the DC link in response to both 1-phase and 3-phase 5 cycle faults on both rectifier and inverter commutating buses.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.11a
• /
• pp.661-661
• /
• 2005

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.556-559
• /
• 2000

Pulse inverter-type TIG(Tungsten Inert Gas) arc welders are studied to investigate the dynamic performance of welding. Welding currents are controlled to be pulse waveforms resulting in stable are better welding performance. The hybrid-type controller is proposed to control the welding current. Todemonstrate the practical significance of our results we present some simulation results.