• 제목/요약/키워드: current profile

검색결과 766건 처리시간 0.032초

등가감속 프로파일을 이용한 EOTS 위치제어 (EOTS Position Control Using Constant Acceleration and Deceleration Profile)

  • 임정빈;유준
    • 한국군사과학기술학회지
    • /
    • 제16권1호
    • /
    • pp.89-94
    • /
    • 2013
  • Electro Otical Tracking System(EOTS) is required for a rapid movement as well as the stabilization of Line-Of-Sight(LOS). In order to achieve these two goals, this paper presents a position and velocity driving profile generation method from the constant acceleration and deceleration profile according to the current state, enabling a fast and smooth trajectory even if the target position changes during the movement of LOS. Simulation and experimental results reveal that the settling time could be reduced significantly by adopting the present position control scheme.

고주파수용 SiGe HBT의 베이스 프로파일 시뮬레이션에 관한 연구 (Base Profile Simulation of SiGe Heterojunction Bipolar Transistor for High Frequency Applications)

  • 이우희;이준하;박병수;이홍주
    • 한국산학기술학회:학술대회논문집
    • /
    • 한국산학기술학회 2004년도 춘계학술대회
    • /
    • pp.172-175
    • /
    • 2004
  • This paper analyzes the effects of Ge profiles shape of SiGe heterojunction bipolar transistors (HBT's) for high frequency application. Device simulations using ATLAS/BLAZE for the SiGe HBT with trapezoidal or triangular Ge profile are carried out to optimize the device performance. An HBT with $15\%$ triangular Ge profile shows higher cut-off frequency and DC current gain than that with $19\%$ trapezoidal Ge profile. The cut-off frequency and DC gain are increased from 42GHz to 84GHz and from 200 to 600, respectively. The SiGe HBT has been fabricated using a production CVD reactor.

  • PDF

동해 남서해역에서 ADCP 자료에 의한 후방산란 강도와 수온구조와의 비교 (Comparison of the Temperature Profile with the Backscattering Strength by the ADCP Data in the Southwestern Part of the East Sea)

  • 강돈혁;나정열
    • 한국해양학회지
    • /
    • 제29권3호
    • /
    • pp.287-295
    • /
    • 1994
  • 1993년 4월 동해 남서해역에 발생한 난수성 소용돌이의 수온구조와 ADCP (Acoustical Doppler Current Profiler)의 음향자료를 이용하여 계산된 후방산란 강도 구조의 상관관계를 연구하였다. 후방산란 강도 계산 결과, 난수성 소용돌이 중심부와 1$0^{\circ}C$의 등온선 부근에서 산란체의 의한 산랑강도가 크게 나타나고 있다. 수온 구조와 의 비교시 남북단면의 경우 산란강도 구조는 수온 구조와 일치하는 모양을 보이고 있 으나, 동서단면의 경우 산란강도가 연안쪽에서 크게 나타나는 비대칭 구조를 보이고 있어 수온구조와 일치하지 않고 있다. 이같은 비대칭 현상은 동한난류의 유입축인 연 안쪽에서 해류와 산란체로 작용하는 부유생물(주로 동물성 플랑크톤)이 함께 이동하여 산란체의 양적 분포가 크기 때문이라 설명할 수 있다. 또한 같은 해 8월 관측된 CREAMS '93(Circulation Research of the East Asian Marginal Sea)의 ADCP 자료 분석 결과는 산란강도와 수온구조가 유사하게 나타나고 있다.

  • PDF

미세 구조 MOSFET에서 문턱전압 변화를 최소화하기 위한 최적의 스켈링 이론 (Scaling theory to minimize the roll-off of threshold voltage for ultra fine MOSFET)

  • 정학기;김재홍;고석웅
    • 한국정보통신학회논문지
    • /
    • 제7권4호
    • /
    • pp.719-724
    • /
    • 2003
  • 본 논문은 halo doping profile을 갖는 나노구조 LDD MOSFET의 문턱전압에 대하여 연구하였다. 소자의 크기는 일반화된 스켈링 이론을 사용하여 100nm 에서 40m까지 스켈링하였다. Van Dort Quantum Correction Model(QM) 모델을 정전계 스켈링 이론과 정전압 스켈링 이론에 적용하여 문턱전압을 조사하였으며, gate oxide 두께의 변화 따른 direct tunneling current를 조사하였다. 결과적으로 게이트 길이가 감소됨에 따라 문턱전압이 정전계 스켈링에서는 감소하고 정전압 스켈링에서는 증가함을 알았고 direct tunneling current는 gate oxide 두께가 감소함에 따라 증가됨을 알았다. 또한 채널 길이의 감소에 따른 MOSFET의 문턱전압에 대한 roll-off특성을 최소화하기 위하여 일반화된 스켈링에서 $\alpha$값은 거의 1 이여야 함을 알았다.

와전류 제동장치 설계검증을 위한 동역학적 해석 (Dynamic analysis of eddy current brake system for design evaluation)

  • 정경렬;김경택;백진성
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2002년도 추계학술대회논문집
    • /
    • pp.110-115
    • /
    • 2002
  • In this paper, the results of an analysis of the dynamic behavior of the eddy current brake(ECB) system are presented. The measured irregularity of the track in Korean high speed line and the track irregularity given by ERRI(high level) were used for simulation. The wheel-rail profile combination were analyzed with different rail gauges. A model of the bogie with an substitute body for the carbody was implemented in the Multi-body-Simulation Program SIMPACK. The ECB frame was modelled both as flexible body and as rigid body. Four different driving conditions were analyzed. In this study dynamic behavior in general were performed to evaluate the design of eddy current brake system and specially the effect of damper was also studied. A comparison of simulations with and without damper shows that the damper have most effect for lower speed. The simulation results will be verified by comparison with measured data from on line test and also used for improving design.

  • PDF

자동차용 솔레노이드 밸브의 동특성을 위한 연성해석 (Co-simulation for Dynamic Characteristic Analaysis of Solenoid Valve for Vehicle)

  • 김기찬
    • 한국산학기술학회논문지
    • /
    • 제15권6호
    • /
    • pp.3821-3826
    • /
    • 2014
  • 본 논문에서는 자동차용 솔레노이드 밸브의 전자장 해석 기반의 동특성 해석 모델을 통하여 성능을 향상시키는 방법을 제안한다. 종래의 솔레노이드 밸브의 요크와 플런저의 형상 최적설계를 통하여 저전류 고추력의 고성능 솔레노이드 모델을 도출하였다. 동특성 해석을 수행하기 위해 솔레노이드 밸브의 입력 전류 패턴을 분석하고, 이를 통해 밸브의 개폐시 속도, 추력 정보를 해석하였다. 입력 전류 패턴을 출력하는 제어로직의 회로모델과 스프링 및 댐핑 등을 고려할 수 있는 솔레노이드 밸브의 전자장 해석모델의 연동해석기반을 제안하여 입력전류 패턴의 변화가 밸브 동특성에 주는 영향을 분석할 수 있었다. 마지막으로 종래모델과 최적모델의 동특성 해석을 통하여 최적설계 모델의 성능이 개선됨을 확인하였다.

Scanning Hall probe를 이용한 coated conductor의 field profile 측정과 current profile 계산 (Measurements of the field profiles using scanning Hall probe and calculation of the current profiles of coated conductors)

  • 유재은;이상무;정예현;이재영;정용환;염도준;김호섭;하홍수;오상수
    • Progress in Superconductivity
    • /
    • 제8권2호
    • /
    • pp.169-174
    • /
    • 2007
  • We measured the field profiles, H(x)'s of coated conductors by using scanning Hall probe method when various magnetic fields, $H{_\alpha}'s$ or currents, I's were applied. From the measured field profiles, we calculated the current profiles, J(x)'s by the inversion method. The calculated J(x)'s of coated conductors show some different properties from the standard critical state model. $J{_c}'s$ are inhomogeneous varying with the positions and are not constant when $H_{\alpha}$ or I changes. And when I decreases the features of current reversion are remarkably different from the model.

  • PDF

코너부 모깍기 엔드밀가공시 가공정밀도의 최적조건에 관한 연구 (A study on the optimal conditions for machining accuracy when endmill fillet cutting at the corner)

  • 최성윤;권대규;박인수;왕덕현
    • 한국기계가공학회지
    • /
    • 제15권4호
    • /
    • pp.101-108
    • /
    • 2016
  • Endmill fillet cutting at the corner was conducted with the online measurement of cutting forces and tool deflection by a tool dynamometer and an eddy current sensor system. The profile of the machined surface was also compared with the CAD profile with a Coordinate Measuring Machine (CMM) and CALYPSO software. It was found that the end mill cutter with four blades has a better surface profile than that with two blades, and the cutting forces and tool deformation were increased as the cutting speed was increased. When the tool located at the degree $45^{\circ}$ corner was found to conduct the maximum cutting force than started to the point of the workpiece. As it was compared with the CMM and ANOVA analysis result in the case that the cutting force and tool deformation was the maximum, it was found that the result was affected by the spindle speed and the number of blades.

아르헨티나에서 외국광산기업, 야마나 골드, 개요소개 (Introduction of Profile of Foreign Mining Company, Yamana Gold, in Argentina)

  • 이한영
    • 암석학회지
    • /
    • 제18권4호
    • /
    • pp.371-379
    • /
    • 2009
  • 아르헨티나의 대표적인 외국광산기업인 야마나 골드의 회사연혁, 현재와 미래의 광산프로젝트, 생산량의 개요를 소개하였다. 이는 신뢰성있는 협력파트너를 모색하려는 한국 광산기업들에게 실질적인 회사정보를 제공하기 위함이다.

Profile of Primary Health Care Post - Focused on Saje PHCP in Wonju-Si, Kangwon-Do, Korea -

  • So, Ae-Young
    • 한국농촌간호학회지
    • /
    • 제3권2호
    • /
    • pp.75-80
    • /
    • 2008
  • This profile presents a brief overview of the past and current primary health care of Saje PHCP in Wonju Si, Kangwon-Do, Korea. Because of the increasing in the proportion of the elderly in the population and the vulnerability among groups, they are one of the main targets of the PHC through programs such as chronic disease management, health promotion activities (exercise, diet, smoking and alcohol control). Curative services have been decreased and preventive services have been increased.