• Journal of the Korean Society of Radiology
• /
• v.14 no.5
• /
• pp.603-612
• /
• 2020

This study has a purpose to look into the effect of the relationship between the Tube current (mA) and SOD(Source to Object Distance), which is a parameter of lower limb angiography examination, and the dilution rate of the contrast medium concentration (300, 320, 350) on the image. To that end, using 3 mm vessel model water phantom, a vessel model custom made in the size of peripheral vessel diameter, this study measured relationships between change of parameters, such as tube current (mA), SOD and varying concentrations (300, 320, 350) of contrast medium dilution into SNR and CNR values while analyzing the coefficients of variance(cv<10). The software used to measure SNR and CNR values was Image J 1.50i from NIH (National Institutes of Health, USA). MPV (mean pixel value) and SD (standard deviation) were used after verifying numerically the image signal for region of interest (ROI) and background on phantom from the DICOM (digital imaging and communications in medicine) 3.0 file transmitted to PACS. As to contrast medium dilution by the change of tube current, when 146 mA and 102 mA were compared, For both SNR and CNR, the coefficient of variation value was less than 10 until the section of CM: N/S dilution (100% ~ 30% : 70%) but CM: N/S dilution rate (20%: 80% ~ 10% : 90%) the coefficient of variation was 10 or more. As to contrast medium dilution by concentration for SOD change, when SOD's (32.5 cm and 22.5 cm) were compared,For both SNR and CNR, the coefficient of variation value was less than 10 until the section of CM: N/S dilution (100% ~ 30% : 70%) but CM: N/S dilution rate (20%: 80% ~ 10% : 90%) the coefficient of variation was 10 or more. As to contrast medium dilution by concentration for SOD change, when SOD's (32.5 cm and 12.5 cm) were compared,For both SNR and CNR, the coefficient of variation value was less than 10 until the section of CM: N/S dilution (100% ~ 30% : 70%) but CM: N/S dilution rate (20%: 80% ~ 10% : 90%) the coefficient of variation was 10 or more. As a result, set a low tube current value in other tests or procedures including peripheral angiography of the lower extremities in the intervention, and make the table as close as possible to the image receiver, and adjust the contrast agent concentration (300) to CM: N/S dilution (30%: 70%). ) Is suggested as the most efficient way to obtain images with an appropriate concentration while simultaneously reducing the burden on the kidney and the burden on exposure.

• Korean Journal of Occupational Health Nursing
• /
• v.12 no.1
• /
• pp.80-88
• /
• 2003

Rehabilitation has emerged in recent years as major topic for the handicaped in industrial accident compensation insurance(IACI). Specially social support helps the handicaped adjust themselves psychosocially to handicap. This study was conducted to examine different contents and perceived social support, and provide guidlines for specific and proper rehabilitation for the handicaped of IACI. This study is a descriptive study which were collected through two phases using structured questionnaire. In the first stage, surveys were performed via telephone interviews. In the second stage, surveys were performed via home-visit subjects in the first stage included the handicaped of IACI. Finally data were collected from 338 subjects and analyzes by SPSS/PC+10. The instruments of this study were the perceived social support scale which developed by Lee(1996). These scales in the form of 5-point Likert type, consists of 20 items, including 3 subscales of emotional support, informational support, instrumental support. The mean score of social support was 57.2, emotional support 21.0, informational support 21.2 and instrumental support 15.2. The mean of depression for psychosocial factors is 37.5. Threre were significant differences in total perceived social support; age, job status, handicaped degree in IACI, post-traumatic complication and use of instrument. Emotional support was significant differences; age, number of dependent family, job status, handicaped degree in IACI, use of instrument and depression. Informational support was significant differences; job status, posttraumatic complication, use of instrument and depression. Instrumental support was significant differences; sex, job status, handicaped degree in IACI, use of instrument, and depression. The current system of the Labor Welfare institute is not appropriate for solving health problems of the handicaped in IACI. Therefore, it is necessary to develop the plan which can provide the handicaped in IACI high-quality rehabilitation services, so that they must use those services in the community without being dependent on hospitals. This study proposes home visit nursing services as the way to provide various health services within community for the handicaped in IACI.

• Journal of Digital Contents Society
• /
• v.13 no.2
• /
• pp.225-233
• /
• 2012

The 3D stereoscopic image contents have been emerging as the blue chip of the contents market of the next generation since the . However, all the 3D contents created commercially in the country have failed to enter box office. It is because the quality of Korean 3D contents is much lower than that of overseas contents and also current 3D post production process is based on 2D. Considering all these facts, the 3D editing process has connection with the quality of contents. The current 3D editing processes of the production case of are using the way that edits with the system on basis of 2D, followed by checking with 3D display system and modifying, if there are any problems. In order to improve those conditions, I suggest that the 3D editing process contain more objectivity by visualizing the depth data applied in some composition work such as Disparity map, Depth map, and the current 3D editing process. The proposed process has been used in the music drama , comparing with those of the film . The 3D values could be checked among cuts which have been changed a lot since those of , while the 3D value of drew an equal result in general. Since the current process is based on an artist's subjective sense of 3D, it could be changed according to the condition and state of the artist. Furthermore, it is impossible for us to predict the positive range, so it is apprehended that the cubic effect of space might be perverted by showing each different 3D value according to cuts in the same space or a limited space. On the other hand, the objective 3D editing by applying the visualization of depth data can adjust itself to the cubic effect of the same space and the whole content equally, which will enrich the 3D contents. It will even be able to solve some problems such as distortion of cubic effect and visual fatigue, etc.

• Journal of the Economic Geographical Society of Korea
• /
• v.14 no.4
• /
• pp.467-485
• /
• 2011

After Korean War, Korea focused on catching up with the world economy by concentrating on some target industries around the Capital Region and southern coastal cities. Thus, the regional disparity between Capital Region and non-Capital Regions increased drastically. At last, when Korea acquired full-fledged autonomy in 1994 in the Civilian government (1993-1998) and experienced the Asian financial crisis in 1997-1998, local governments were awakened to the notion of region-oriented development, especially for regional industrial development. The purposes of this paper are to introduce regional industrial development policies since 1998 and to suggest some recommendations in terms of how to adjust regional development for industrial policies in the future. In the introducing phase (Kim administration, 1998-2003), four provincial governments requested national funding to raise regional industries that are of strategic importance. At the same time, the central government recognized the need to nurture regional industries to overcome structural weaknesses. As a result, the Roh administration (2003-2008) gave a birth to a systematizing phase. As the ultimate regional policy objective, the balanced national development has been set and the Special Acts, Special Accounts, Committee, and National Plan have been established. Regional Industrial Promotion Project has been carried out very actively during this period. It had a good start albeit idealistic to a certain extent. Therefore, the current government has changed policy paradigm from balanced growth to regional competitiveness along with global paradigm shifts. In order to enhance regional competitiveness, regional development policies have been pursued in more efficient way. Leading Industry Nurturing Projects (LINPs) on Economic Region level, existed Regional Industrial Promotion Projects (RIPPs) on Province level, and Region Specific Industry Projects (RSIPs) on Local Area level have been implemented. Now, it is appropriate to review regional development policies including industrial policies since 1998 and to adjust them for the future sustainable regional development. Because LINPs and RIPPs will be terminated in next two years, the 2nd stage projects are on planning to reduce the redundancies in two projects. In addition, business support program would be reformed from subsiding technology development to building ecological business system. Finally some policy implications are provided in this paper, which is useful to establish the new regional industrial policies for both central and local government.

• KIPS Transactions on Computer and Communication Systems
• /
• v.4 no.6
• /
• pp.185-196
• /
• 2015

Energy aware server clusters aim to reduce power consumption at maximum while keeping QoS(Quality of Service) compared to energy non-aware server clusters. They adjust the power mode of each server in a fixed or variable time interval to let only the minimum number of servers needed to handle current user requests ON. Previous studies on energy aware server cluster put efforts to reduce power consumption further or to keep QoS, but they do not consider energy efficiency well. In this paper, we propose an energy efficient cluster management based on autonomous learning for energy aware server clusters. Using parameters optimized through autonomous learning, our method adjusts server power mode to achieve maximum performance with respect to power consumption. Our method repeats the following procedure for adjusting the power modes of servers. Firstly, according to the current load and traffic pattern, it classifies current workload pattern type in a predetermined way. Secondly, it searches learning table to check whether learning has been performed for the classified workload pattern type in the past. If yes, it uses the already-stored parameters. Otherwise, it performs learning for the classified workload pattern type to find the best parameters in terms of energy efficiency and stores the optimized parameters. Thirdly, it adjusts server power mode with the parameters. We implemented the proposed method and performed experiments with a cluster of 16 servers using three different kinds of load patterns. Experimental results show that the proposed method is better than the existing methods in terms of energy efficiency: the numbers of good response per unit power consumed in the proposed method are 99.8%, 107.5% and 141.8% of those in the existing static method, 102.0%, 107.0% and 106.8% of those in the existing prediction method for banking load pattern, real load pattern, and virtual load pattern, respectively.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.15 no.1
• /
• pp.90-93
• /
• 2011

Purpose: A Pixelated BSGI gamma camera has features to enhance resolution and sensitivity and minimize the distance between detector and organs by narrow FOV. Therefore, it is known as useful device to examine small organs such as thyroid, parathyroid and gall bladder. In general, when we would like to enlarge the size of images and obtain high resolution images by gamma camera in nuclear medicine study, we use pinhole collimator. The purpose of this study is to evaluate the usefulness of Pixelated BSGI gamma camera and to compare to it using pinhole collimator in thyroid scan which is a study of typical small organs. Materials and methods: (1) The evaluation of sensitivity and spatial resolution: We measured sensitivity and spatial resolution of Pixelated BSGI with LEHR collimator and Infinia gamma camera with pinhole collimator. The sensitivity was measured by point source sensitivity test recommended by IAEA. We acquired images considering dead time in BSGI gamma camera for 100 seconds and used $^{99m}TcO4-\;400{\mu}Ci$ line source. (2) The evaluation of thyroid phantom: The thyroid phantom was filled with $^{99m}TcO4-$. After set 300 sec or 100 kcts stop conditions, we acquired images from both pixelated BSGI gamma camera and Infinia gamma camera with LEHR collimator. And we performed all thyroid studies in the same way as current AMC's procedure. Results: (1) the result of sensitivity: As a result, the sensitivity and spatial resolution of pixelated BSGI gamma camera were better than Infinia's. The sensitivities of pixelated BSGI and Infinia gamma camera were $290cps/{\mu}Ci$ and $350cps/{\mu}Ci$ respectively. So, the sensitivity of pixelated BSGI was 1.2 times higher than Infinia's (2) the result of thyroid phantom: Consequently, we confirmed that images of Pixelated BSGI gamma camera were more distinguishable between hot and cold spot compared with Infinia gamma camera. Conclusion: A pixelated BSGI gamma camera is able to shorten the acquisition time. Furthermore, the patients are exposed to radiation less than before by reducing amount of radiopharmaceutical doses. Shortening scan time makes images better by minimizing patient's breath and motion. And also, the distance between organ and detector is minimized because detector of pixelated BSGI gamma camera is small and possible to rotate. When patient cannot move at all, it is useful since device is feasible to move itself. However, although a pixelated BSGI gamma camera has these advantages, the effect of dead time occurs over 2000 cts/s since it was produced only for breast scan. So, there were low concentrations in organ. Therefore, we should consider that it needs to take tests to adjust acquisition time and amount of radiopharmaceutical doses in thyroid scan case with a pixelated BSGI gamma camera.