• 대한전자공학회논문지SD
• /
• 제42권12호
• /
• pp.103-112
• /
• 2005

본 논문에서는 압전 및 자발 분극 효과를 내포한 단채널 n-AlGaN/GaN HEMT의 전류-전압 특성을 도출하고자 AlGaN 및 GaN층 내에서 분극을 고려한 2차원 Poisson 방정식의 해법을 제안하였다. AlGaN 및 GaN층에서의 2차원적 전위 변화를 채널전류의 연속조건과 컨시스턴트하게 도출하기 위해서 GaN영역에 형성된 양자 우물을 통해 흐르는 전자에 대한 전계-의존 이동도를 고려하였다. 도출된 표현식은 동작 전압 전 영역과 장/단채널 소자에 대하여 일괄적으로 적용될 수 있을 것으로 보이며, 계산 결과로부터 2차원 전위 분포 변화 효과를 고려하기 위한 파라미터 ${\alpha}$의 도입이 타당함을 보이고 있다. 이로써, 본 모델은 기존의 모델에 비해 드레인 전압의 증가에 따른 드레인 포화전류의 증가 및 문턱 전압의 감소 현상 등을 보다 적절히 설명할 수 있음을 보이고 있다.

• 복식문화연구
• /
• 제26권1호
• /
• pp.56-72
• /
• 2018

In recent years, there has been increasing interest in the senior people in our aging society. This paper will give an account of the current cases of senior shift. The first section of this paper will examine a conceptual approach based on a literature review and analyze case studies of senior shifts by national fashion and beauty brands. It will be helpful for the 'New Senior' consumer group, which in emerging in an aging society. The research methods applied were a literature review and a case study, and a database search was conducted to determine the current situation of global brands. The results of the literature review showed that seniors can be classified into four types based on their physical aging condition and emotional tendency: Prime Senior, Smart Senior, Rational Senior, and Slump Senior. The first thing that needs to be said is that the Prime Senior type is found commonly in as a way to appoint a senior model in order to switch brand image. Cases of the Smart Senior type appeared only in the beauty field, which attempted multilateral approaches such as launching products exclusively for seniors and offering make-up services after improving the usability and functionality in response to senior consumers'needs. However, as no cases of senior shift were found for the Rational Senior and Slump Senior types in either the fashion or beauty field, future studies should explore the market approaches used in those categories.

• The Korean Journal of Ecology
• /
• 제14권4호
• /
• pp.379-398
• /
• 1991

In order to investigate the ecotypic variations of pulsatilla koreana nakai distributed in korea, 8 local populations of the plant were selected in accordance with latitude and compared on the differences of leaf shape, elongstion, stomatal distribution and dhlorophyll content. The incised angle of the plant is 38。32' in cheju, showing a great difference as compared with 23。77'-30。 32' of the other sites. as to the incised rate, mt. togyu and cheju representsed relatively high values of 49.04% and 48.21% the parted leaved individuals were only observed along the warm current coastal area including cheju, sokcho and sunchon and were 54(62.8%), 2(2.5%) and 3(3.3%) in the sites, respectively. Especially, the individuals consisting of only parted learves were 5(5.8%) in cheju alone and none of the other sites showed such individuals at all. So p. cernua distributed in cheju and p. koreana in inland area can be considered to beecotypic variations of the same species from the upper investigations. According to the elongations of leaf and rachis, the local populations could be classified into 3 types, such as warm current coastal area type(cheju,sunchon and sokcho),southern inland area type(andong, chungju and mt. togyu)and central inland ara type(mt. komdan and hongchon). The dentate numbera of 39.80-43.73 in the warm current area were also different from those of 87% in mt.togyu and 15% in hongchon, while opposite leaflets account for 100% in the other sites. The content of chlorophyll ranged from 0.609 mg/g. d.w.(cheju)to 0.924 mg/g.d.w.(hongchon), showing an increasing trends as the latitudes grow higher. The number of stomata on the low epidermis is much larger than that on the upper epidermis in the whole area. But both aspects showed an increasing tendency, too as the latitude becomes higher.

• 한국전기전자재료학회논문지
• /
• 제22권7호
• /
• pp.606-611
• /
• 2009

AC loss is one of the important factors for commercialization of a high temperature superconducting (HTS) cable from an economic point of view. But AC loss characteristics of the HTS-cable are not elucidated completely because of its complex structure. As an earlier stage of analyzing the AC loss in the 22.9 kV/50 MVA, 100m HTS-cable system of Korea Electric Power Corporation (KEPCO) which is now in collaboration with us, a two-dimensional (2D) numerical model, which takes into account the nonlinear conductivity properties of a high temperature superconductor, has been developed. In order to examine our 2D model, we have prepared several single-layer cable samples whose AC losses are sufficiently reliable due to their simple structure. The AC losses of the samples were experimentally investigated and then compared with our 2D model. The results show that the numerically calculated AC losses are not in good agreement with the measured ones for the cylindrical cable and deca-cable samples with low critical current density. However, the numerically calculated and measured AC losses are relatively in good agreement for the deca-cable and hex-cable samples with high critical current density, although the difference between these two loss data in the deca-cable sample tends to increase in the low current region.

• Journal of Electrical Engineering and Technology
• /
• 제10권4호
• /
• pp.1626-1634
• /
• 2015

LCL filters are widely used in three-phase PWM converter for its advantages of small volume, low cost and inhibition of high frequency current harmonic. However, it is difficult to optimize its design because its parameters are mutually influenced while the value of each parameter for LCL filter has impacts on the converter's cost and size. In this paper, the target of optimization is to minimize the parameter values of LCL filter, and an optimization method for parameters of LCL filter of three-phase PWM converter based on least square method is proposed. With this method, a quantitative calculation of the harmonic component of the converter’s side phase voltage is performed first, and then the quantitative relationship between phase voltage harmonics and grid phase current harmonics is analyzed. After that, the attenuation requirement of each harmonic is obtained by taking into account the requirements for each harmonic component of grid current. Then according to the optimization objective, the objective function with minimum harmonic attenuation deviation is established, and least squares method is adopted for three-dimensional global searching of parameters for LCL filter. Thus, the designed harmonic attenuation curve approximates the minimum attenuation requirements, and the optimized LCL filter parameters are obtained. Finally, the effectiveness of the method is verified by the experiments.

• Advances in Computational Design
• /
• 제3권4호
• /
• pp.319-338
• /
• 2018

High-performing architecture should be designed by taking into account the mutual dependency between the new building and the local context. The performative architecture plays an important role to avert any unforeseen failures after the building has been built; particularly ones related to the microclimate impacts that affect the human comfort. The use of the concept of solar envelopes helps designers to construct the developable mass of the building design considering the solar access and the site obstruction. However, the current analysis method using solar envelopes lack in terms of integrating the detailed information of the existing context during the simulation process. In architectural design, often the current site modelling not only absent in preserving the complex geometry but also information on the surface characteristics. Currently, the emerging applications of point clouds offer a great possibility to overcome these limitations, since they include the attribute information such as XYZ as the position information and RGB as the color information. This study particularly presents a comparative analysis between the manually built 3D models and the models generated from the point cloud data. The modelling comparisons focus on the relevant factors of solar radiation and a set of simulation to calculate the performance indicators regarding selected portions of the models. The experimental results emphasize an introduction of the design approach and the dataset visibility of the 3D existing environments. This paper ultimately aims at improving the current architectural decision of support environment means, by increasing the correspondence between the digital models for performance analysis and the real environments (context of design) during the conceptual design phase.

• Asian Pacific Journal of Cancer Prevention
• /
• 제17권8호
• /
• pp.3663-3673
• /
• 2016

Cervical cancer (CaCx) is the second most fatal cancer contributing to 14% of cancers in Indian females, which account for 25.4% and 26.5% of the global burden of CaCx prevalence and mortality, respectively. Persistent infection with high-risk human papilloma virus (HPV- strains 16 and 18) is the most important risk factor for precursors of invasive CaCx. Comprehensive prevention strategies for CaCx should include screening and HPV vaccination. Three screening modalities for CaCx are cytology, visual inspection with acetic acid, and HPV testing. There is no Indian national policy on CaCx prevention, and screening of asymptomatic females against CaCx is practically non-existent. HPV vaccines can make a major breakthrough in the control of CaCx in India which has high disease load and no organized screening program. Despite the Indian Government's effort to introduce HPV vaccination in the National Immunization Program and bring down vaccine cost, challenges to implementing vaccination in India are strong such as: inadequate epidemiological evidence for disease prioritization, duration of vaccine use, parental attitudes, and vaccine acceptance. This paper reviews the current epidemiology of CaCx and HPV in India, and the current status of HPV vaccination in the country. This article stresses the need for more research in the Indian context, to evaluate interventions for CaCx and assess their applicability, success, scalability and sustainability within the constraints of the Indian health care system.

• 복식
• /
• 제64권6호
• /
• pp.16-32
• /
• 2014

This study aims to compare the current conditions of fashion education organizations in Korea and China. The results are as follows: 1. As for the departments related to fashion in Korea, the department of clothing was most frequently found in the fields of everyday science and natural science and design was most frequent in art related fields. 2. As for the departments related to fashion in China, the department of design was usually found in the fields of spinning and weaving, art, fashion, and others, and a college was dedicated to is having departments related to the fashion industry, much larger in scale compare to Korea. 3. Subject analysis found that both Korea and China put the most weight on the subject of design than any other fields. 4. Subject analysis of the fashion related departments in Korea found that all three department groups put considerable weight on clothing design and clothing composition subjects with other subjects having greater parts in the curriculum. 5. As for the departments related to fashion in China, design-related subjects were most frequently found, irrespective of the title of the fashion department, and the subjects concerning fashion marketing were widely distributed. 6. It seems that the curriculum for fashion colleges in China have been affected by the characteristics of the university before absorptive integration and setting based on the local characteristics rather than by the characteristics of the college. 7. For the curriculum of Korea, it is necessary to divide theoretical and practical ones and to develop practical subjects in association with experts in actual fields. China needs to take into account the local characteristics due to its global curriculum and large area.

• 한국재료학회지
• /
• 제9권8호
• /
• pp.775-781
• /
• 1999

균일하고 치밀한 미세구조를 갖는 Pd박막이$ PdCl_2$를 사용하는 전기도금방법으로 제조되었다. 본 연구에서는 도금온도와 전류밀도가 주요 공정변수로서 고려되었고 이에 따른 음극효율 및 제조된 Pd도금막의 결정성, 형상 및 경도 등의 특성이 측정되었고, 이들간의 상호관계성이 검토되었다. 연구결과에 따르면, $PdCl_2$를 사용하는 본 Pd전기도금 시스템에서는 5$0^{\circ}C$와 5mA/$\textrm{cm}^2$의 조건이 도금막의 형상으로 볼 때, 최적의 도금조건이라고 간주된다. 최적 조건에서 제조된 Pd도금막의 경도는 약 600kg/$\textrm{mm}^2$이었다. 변수 및 특성간의 관계성 검토 결과, Pd막의 경도는 미세구조에 의해 큰 영향을 받지만, 결정의 배향성과의 연관성은 작은 것으로 해석된다.

• 에너지공학
• /
• 제26권4호
• /
• pp.127-142
• /
• 2017

2014.7월 유연탄 개별소비세 부과 이후 고열량탄 및 기준 구간내 상위 열량탄 선호 현상 등 사용량 왜곡 현상이 나타나 평균 도입열량 상승으로 추가적인 연료도입 비용이 발생하였다. 이에 따라 고열량탄 위주의 호주/러시아탄 비중이 확대된 반면 중,저열량탄 위주의 인도네시아탄 비중이 축소되었다. 이는 유연탄의 특성 반영이 미흡한 과세 제도에 따라 나타난 현상으로 사용량 왜곡 뿐 아니라 해외자원 개발 동기부여 저해, 연소기술 개발 차질 등의 문제가 있어 이를 해결 하기 위한 개선 방안이 필요할 것이다. 적정 세수를 유지하면서 사용량 왜곡을 해소할 수 있는 개선방안으로 5,000kcal/kg 기준열량 비례 부과방식과 5,000kcal/kg 기준 열량 세액단가와 동일한 상하 200kcal/kg 단위 총 15 구간 세분화 부과방식이 있으며 이를 통해 사용량 왜곡 현상 해소는 물론 세수증대와 연료도입 비용 절감의 효과가 있을 것으로 예상한다.