• Advances in Energy Research
• /
• v.3 no.2
• /
• pp.97-115
• /
• 2015

Energy holds key to economic growth and prosperity of India. Currently, India has very high-energy import dependence, especially in the case of crude oil (80%) and natural gas (40%). Even coal import has been increasing over the years. Considering India's population growth, emphasis on manufacturing, production, and service industry, energy consumption is bound to increase. More fossil energy consumption means greater dependence on energy import leading to widening trade deficit and current account deficit. Therefore, exploitation of indigenous renewable energy production is necessary. The paper reviews the progress and growth of renewable energy production, distribution, and consumption in India. The paper highlights some of the enablers of renewable energy in India. The authors discuss the opportunities and challenges of increasing share of renewable energy to reduce energy import and address issues of energy security in India. The findings suggest that India is ready for a quantum leap in renewable production by 2022.

• Clinical and Experimental Pediatrics
• /
• v.64 no.4
• /
• pp.157-164
• /
• 2021

Since the emergence of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) in December 2019, a small number of coronavirus disease 2019 (COVID-19) cases in neonates have been reported worldwide. Neonates currently account for only a minor proportion of the pediatric population affected by COVID-19. Thus, data on the epidemiological and clinical features of COVID-19 in neonates are limited. Approximately 3% of neonates born to mothers with COVID-19 reportedly tested positive for SARS-CoV-2. Current limited data on neonates with COVID-19 suggest that neonatal COVID-19 shows a relatively benign course despite a high requirement for mechanical ventilation. However, neonates with pre-existing medical conditions and preterm infants appear to be at a higher risk of developing severe COVID-19. The greatest perinatal concern of the COVID-19 pandemic is the possibility of vertical transmission, especially transplacental transmission of SARS-CoV-2. Although direct evidence of the vertical transmission of SARS-CoV-2 is lacking, its possibility during late pregnancy cannot be ruled out. This review summarizes available case studies on COVID-19 in neonates and introduces what is currently known about neonatal COVID-19 with focus on its vertical transmission.

• Steel and Composite Structures
• /
• v.32 no.6
• /
• pp.821-832
• /
• 2019

An analysis on thermal buckling and postbuckling of composite laminated plates reinforced with a low amount of graphene platelets is performed in the current investigation. It is assumed that graphaene platelets are randomly oriented and uniformly dispersed in each layer of the composite media. Elastic properties of the nanocomposite media are obtained by means of the modified Halpin-Tsai approach which takes into account the size effects of the graphene reinforcements. By means of the von $K{\acute{a}}rm{\acute{a}}n$ type of geometrical nonlinearity, third order shear deformation theory and nonuniform rational B-spline (NURBS) based isogeometric finite element method, the governing equations for the thermal postbuckling of nanocomposite plates in rectangular shape are established. These equations are solved by means of a direct displacement control strategy. Numerical examples are given to study the effects of boundary conditions, weight fraction of graphene platelets and distribution pattern of graphene platelets. It is shown that, with introduction of a small amount of graphene platelets into the matrix of the composite media, the critical buckling temperature of the plate may be enhanced and thermal postbuckling deflection may be alleviated.

• East Asian Economic Review
• /
• v.22 no.4
• /
• pp.531-555
• /
• 2018

This article aims to review the monetary policy rule under inflation targeting framework focusing on Mongolia. The empirical analysis estimates the policy reaction function to see if the inflation targeting has been linked with a monetary policy rule emphasizing on inflation stabilization since its adoption in 2007. The study contributes to the literature by examining the linkage between Mongolian monetary policy rule and inflation targeting directly and thoroughly for the first time and also by taking into account a recent progress in the inflation targeting framework toward forward-looking mode. The main findings were: the Mongolian current monetary policy rule under inflation targeting is characterized as inflation-responsive rule with forward-looking manner (one quarter ahead); the inflation responsiveness is, however, weak enough to be pro-cyclical to inflation pressure; and the rule is also responsive to exchange rate due to the "fear of floating", which weakens the policy reaction to inflation and output gap.

• ETRI Journal
• /
• v.41 no.2
• /
• pp.224-234
• /
• 2019

This paper proposes a new spectrum forecasting (SF) model to estimate the spectrum demands for future mobile broadband (MBB) services. The model requires five main input metrics, that is, the current available spectrum, site number growth, mobile data traffic growth, average network utilization, and spectrum efficiency growth. Using the proposed SF model, the future MBB spectrum demand for Malaysia in 2020 is forecasted based on the input market data of four major mobile telecommunication operators represented by A-D, which account for approximately 95% of the local mobile market share. Statistical data to generate the five input metrics were obtained from prominent agencies, such as the Malaysian Communications and Multimedia Commission, OpenSignal, Analysys Mason, GSMA, and Huawei. Our forecasting results indicate that by 2020, Malaysia would require approximately 307 MHz of additional spectrum to fulfill the enormous increase in mobile broadband data demands.

• Advances in nano research
• /
• v.7 no.5
• /
• pp.351-364
• /
• 2019

In this work, dynamic behavior of functionally graded (FG) porous nano-beams is studied based on nonlocal nth-order shear deformation theory which takes into the effect of shear deformation without considering shear correction factors. It has been observed that during the manufacture of "functionally graded materials" (FGMs), micro-voids and porosities can occur inside the material. Thus, in this work, the investigation of the dynamic analysis of FG beams taking into account the influence of these imperfections is established. Material characteristics of the FG beam are supposed to be vary continuously within thickness direction according to a "power-law scheme" which is modified to approximate material characteristics for considering the influence of porosities. A comparative study with the known results in the literature confirms the accuracy and efficiency of the current nonlocal nth-order shear deformation theory.

• Electronics and Telecommunications Trends
• /
• v.34 no.3
• /
• pp.65-74
• /
• 2019

The Earth Stations in Motion (ESIM) system is one of the most modern satellite systems, providing high-speed and high-capacity communication with mobility. To facilitate ESIM in the Ka band, operational, technical, and regulatory studies have been conducted in the International Telecommunication Union Radiocommunication Sector (ITU-R) since 2016. In this paper, we introduce the ESIM and discuss its system characteristics and frequency sharing issues with respect to existing services in the same frequency bands. Taking into account current standardization activity in the ITU-R, we provide the latest study results of ESIM operation based on the Conference Preparatory Meeting Report for the World Radiocommunication Conference-19.

• Steel and Composite Structures
• /
• v.33 no.2
• /
• pp.299-306
• /
• 2019

The natural fibre composites are termed as bio-composites. They have shown a promising replacement to the current carbon/glass fibre reinforced composites as environmental friendly materials in specific applications. Natural fibre reinforced composites are potential materials for various engineering applications in automobile, railways, building and Aerospace industry. The natural fibre selected to fabricate the composite material is plant-based fibre e.g., sisal fibre. Sisal fibre is a suitable reinforcement for use in composites on account of its low density, high specific strength, and high hardness. Epoxy is a thermosetting polymer which is used as a resin in natural fibre reinforced composites. Hand lay-up technique was used to fabricate the composites by reinforcing sisal fibres into the epoxy matrix. Composites were prepared with the unidirectional alignment of sisal fibres. Test specimens with different fibre orientations were prepared. The fabricated composites were tested for mechanical properties. Impact test, tensile test, flexural test, hardness test, compression test, and thermal test of composites had been conducted to assess its suitability in industrial applications. Scanning electron microscopy (SEM) test revealed the microstructural information of the fractured surface of composites.

• Nuclear Engineering and Technology
• /
• v.54 no.6
• /
• pp.2156-2172
• /
• 2022

This paper investigates the optimum fiber reinforcement for prestressed concrete containment vessels (PCCVs) under internal pressure. To achieve this aim, steel fiber, which is the most widely used fiber type in current engineering applications, is adopted to constitute steel fiber-reinforced concrete (SFRC) to substitute the conventional concrete in the PCCV. The effects of characteristic parameters, 𝜆_sf, of the steel fiber affecting significantly the mechanical behavior of the concrete are first taken into account. Partial or complete concrete regions of the PCCV are also considered to be replaced by SFRC to balance the economy and safety. By adopting the ABAQUS software, the ultimate bearing capacity and performance for the fiber-reinforced PCCV are scientifically studied and quantified, and the recommendations for the optimum way of fiber reinforcement are presented.

• Journal of Institute of Convergence Technology
• /
• v.11 no.1
• /
• pp.13-18
• /
• 2021

It is widely accepted that the prevention of global warming requires significant reductions in greenhouse gases, particularly CO₂ emissions. Although fossil fuel-based power plants account for the majority of CO₂ emissions, it is urgent to reduce CO₂ emissions in industries that emit large amounts of CO₂ such as steel, petrochemical, and oil refining. This paper examines the current status of CO₂ emission in the domestic oil refining industry and CO₂ emission sources in each unit process in the oil refining industry. Focusing on the previously developed CO₂ capture process, cases and applicability of greenhouse gas reduction in FCC and hydrogen manufacturing processes, which are major processes constituting the oil refining industry, are reviewed.