• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1560-1563
• /
• 1987

This paper is concerned with time delay modeling of ED MOS gates which takes into account the slope of input waveform as well as the load condition. Defining the delay time as the time required to charge/discharge the load to the physical reference level, the rise/fall delay times arc derived in an explicit formula in terms of the sum of optimally weighted current unbalances at two end points of voltage transition. The proposed model is computationally effective and the error is typically within 10% of the SPICE results.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.6
• /
• pp.255-262
• /
• 2001

This paper deals with characteristic analysis method of the slotless type Permanent Magnet Linear Synchronous Motor(PMLSM) using the space harmonic method. Analysis models of the PM and the armature current are described by the magnetization configurations taking into account the 2D and 3D distribution. In 3D analysis, the thrust and normal force can be calculated more accurately, because it can consider the z component flux density which is impossible in 2D analysis. In order to verify the validity of the proposed method, the results of the analytic method are compared with not only the experimental ones but ones of Finite Element Method(FEM).

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.846-848
• /
• 2001

In this paper, electromagnetic fields of a linear induction motor with cage-type secondary are analyzed by the finite element method. Contact resistances between end-bars and secondary conductors are considered in the finite element analysis. The field quantify is a magnetic vector potential transformed into a phasor form. As a result, the sensitivities of a phase current thrust and normal force are presented according to the variation of the contact resistance.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.985-988
• /
• 2006

Oil spills cause huge material damage. Oil and oil products spills may occur at any stage of the offshore oil production and transportation cycle. Therefore taking into account the current trends of oil production, the task of creating a system for shelf and tank fleet monitoring becomes very crucial today. This document describes the technology being implemented to improve oil spill monitoring and surveillance, to ensure SAR data fast acquisition and processing and to develop geographic information systems in support of spill response decision making. The results of technology implementation are also presented below.

• Transactions of Materials Processing
• /
• v.6 no.5
• /
• pp.400-407
• /
• 1997

Geometric mapping technique has been used to find the shape of initial blank for sheet forming. The method was chosen because of its simplicity and numerical efficiency. Error in blank shape were measured along deformation path by FE analysis of forming. Blank shape was modified by volume additionaddition/Subtractiontraction method with taking with taking into account of deformation path. Modified blank shape shows an acceptable result, showing the current method can be an useful tool for predicting blank shape in the practical application. More test will be done to verify the validity of the method.

• Current Optics and Photonics
• /
• v.2 no.1
• /
• pp.39-46
• /
• 2018

Visible-light communication (VLC) combined with advanced illumination can be expected to become an integral part of next-generation communication networks. One of the major concerns in VLC implementation is developing resource-allocation schemes in a multi-user scenario. However, the scheduling for heterogeneous quality of service (QoS) traffic has not been studied so far, for the indoor VLC downlink system. In this paper, we creatively introduce effective-bandwidth and effective-capacity theory into the multi-user scheduling (MUS) problem, to guarantee the user's statistical delay QoS. We also take account of the aggregate interference (AI) in the indoor VLC downlink system, and analyze its impact on the user-centric MUS problem for the first time. Simulations show that the AI has a nonnegligible influence on the scheduling result, and that the proposed scheduling scheme could guarantee the user's QoS requirement under the premise of ensuring sum capacity.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.3
• /
• pp.2147-2150
• /
• 2013

Gynecological malignancies account for 9% of all female cancers worldwide. In the Arab countries Breast cancer is the leading cancer in women followed by cervical cancer. Ovarian cancer ranks as fourth leading cancer in women. There are huge differences in the available resources among Arab countries. However the challenges facing the provision of gynecological cancers services shared similarities like the cultural and religious background. Most of the gynecological cancers are diagnosed at a later stage in Arab countries due to the lack of reproductive health awareness especially among older women combined with the cultural stigma of seeking medical advice for gynecological symptoms. This article discusses the current situation of gynecological cancer services in Arab countries and suggests some practical solutions.

• Structural Engineering and Mechanics
• /
• v.4 no.4
• /
• pp.437-450
• /
• 1996

A study on the behaviour of fibre reinforced concrete deep beams with and without web openings is carried out using nonlinear finite element analysis. Eight node isoparametric plane stress elements are employed to model the fibre reinforced concrete materials. Steel bars are treated using a compatible three node truss elements. The constitutive equations for fibre reinforced concrete materials take into account the softening effect of co-existing shear strains. Element stiffness at each step is formulated based on the tangent modulus at the current level of principal strains. Transformation between principal directions and global coordinate system is imposed. Comparison of analytical results with experimental values indicates reasonably good agreement. The proposed numerical model can be used to study the behaviour of this composite structures of practically any geometries.

• Transactions of Materials Processing
• /
• v.25 no.1
• /
• pp.56-60
• /
• 2016

Precise prediction and control of the strip profile is crucial for automatic process set-up and operation of a hot strip mill. In the current study, we present the effect of post-deformation on the steady-state strip profile. The process was simulated by a 3-D elastic-plastic finite element (FE) analysis. Comparisons are made between the strip profile measured at the roll exit and the steady-state strip profile. The results raised an issue with regard to the importance of taking into account the effect of post-deformation.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2001.02a
• /
• pp.155-158
• /
• 2001

An intermediate cooling is indispensible to reduce the refrigeration power at superconducting system that is cooled conductively by a cryocooler without liquid cryogens. The cooling load at the intermediate stage is caused by the mechanical supports, the radiation shield and the current lead. From the cooling load calculation, a thermodynamic analysis that take into account the temperature-dependent properties of the materials and the actual performance of the cryocooler is developed. For any given physical dimensions of the various components, it is shown that there exist a unique optimum for the intermediate temperature to minimize the overall refrigeration power. The results of this study can be usefully applied to the selection of the cryocooler as well as the design of the conduction-cooled cryostat.