• Elastomers and Composites
• /
• v.33 no.3
• /
• pp.185-192
• /
• 1998

This study was investigated on the physical properties of synthetic rubber compounds containing silica and silane copuled silica. Surface area and pore volume of silane copuled silica appeared to be low compared with those of pure silica because silane coupling agent blocks the pore of silica surface during silanization reaction. Silica with large surface area and high structure showed the short scorch time$(t_5)$ and rapid cure rate. The silane coupled silica showed the shorter scorch time and more rapid cure rate than pure silica because of the of effect of sulfur in the silane coupling agent(Si 69), The high value of $N_2SA$ minus CTAB com-pared with surface area and structure of silica showed the high 300% modulus. Also, the surface area and structure of silica did not affected the amount of PICO loss that indicate the abrasion resistance but affected the amount of cut and chip loss.

• Macromolecular Research
• /
• v.8 no.2
• /
• pp.73-79
• /
• 2000

The influence of mastication of natural rubber (NR) on properties of carbon black-filled NR compounds was studied. Variations of viscosities of the masticated NR and the carbon black-filled NR compound by heating were also investigated. The viscosities of the compounds decreased by increasing the mastication time of the raw rubber. The viscosities of the masticated NR and the compounds increased by increasing the heating time. This was explained by the combination reaction between functional groups in the rubber. The viscosity increment of the masticated rubber and the compounds by heating became larger with increased mastication time. Cure rate of the compound became faster by increasing the mastication time. Modulus of the vulcanizate made of the rubber masticated for a long time was higher than that of the vulcanizate made of the rubber masticated for a short time while elongation at break of the former was shorter than that of the latter. This was explained by the content of bound rubber and chain length of the rubber molecules.

• Polymer(Korea)
• /
• v.25 no.1
• /
• pp.78-89
• /
• 2001

Morphological changes of unsaturated polyester/polyvinylacetate semi-IPN were studied while the phase separation and the cure reaction occurred in a competing fashion. The light scattering and thermal analysis techniques were used to investigate the phase separation rates and mechanical properties resultantly induced by molecular diffusion of thermoplastic polymer during the curing process of thermosetting polymer. The reaction activation energy was calculated by using Flynn-Wall method and the semi-IPN structure exhibited various phase-separation morphological characteristics. When PVAc composition was 10 wt%, the phase separation was not observed during the curing reaction, but the phase separation occurred in a similar fashion to nucleation and growth(NG) mechanism at room temperature. On the other hand, when PVAc composition was over 11.65 wt%, the phase separation was generated in the middle of the curing process. Consequently, the phase separation seemed to influence the curing reaction rate, which was also supported by the changing activation energy with conversion and PVAc composition. Finally, the total scattered intensity was measured at various temperature, and subsequently the diffusion rates of phase separation R(${\beta}m$) were evaluated.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.1
• /
• pp.56-62
• /
• 2024

By introducing curing kinetics and chemo-rheology for the epoxy resin formulation for ultra-high voltage gas insulated switchgear (GIS) Insulating Spacers, a study was conducted to simulate the curing behavior, flow and warpage analysis for optimization of the molding process in automatic pressure gelation. The curing rate equation and chemo-rheology equation were set as fixed values for various factors and other physical property values, and the APG molding process conditions were entered into the Moldflow software to perform optimization numerical simulations of the three-phase insulating spacer. Changes in curing shrinkage according to pack pressure were observed under the optimized process conditions. As a result, it was confirmed that the residence time in the solid state was shortened due to the lowest curing reaction when the curing holding pressure was 3 bar, and the occurrence of deformation due to internal residual stress was minimized.

• Polymer(Korea)
• /
• v.39 no.2
• /
• pp.240-246
• /
• 2015

Formation of a strong 3-dimensional interfacial network structure via chemical reaction between hydroxyl group on silica surface and NR chain by the addition of bis(triethoxysilylpropyl)tetrasulfide (TESPT) into silica-filled NR compound was observed by using Py-GC/MS and SEM. Addition of TESPT into silica-filled NR compound decreased scorch time ($t_{10}$) due to increased sulfur content, and reduced cure rate index (CRI) via continuous reaction between sulfur atoms in TESPT, which acted as a sulfur donor, and activators and/or accelerators. Addition of TESPT in the compound improved processability and mechanical properties of the compound. Overall, we observed that the addition of TESPT into the silica-filled NR compound formed a silica-TESPT-NR network, and thus the degree of crosslinking was increased resulting in improved mechanical properties.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.10
• /
• pp.5037-5042
• /
• 2012

Background: Tobacco contains agents which generate various potent DNA adducts that can cause gene mutations. Production of DNA adducts may be neutralized by glutathione S transferase (GST) along with other phase I and phase II enzyme systems. The existence of null type of GST among the population increases the susceptibility to various disorders and diseases. The present study focuses on the impact of high tobacco usage and possible null type mutation in GST loci. Methods: Genotypes of GST were detected by multiplex polymerase chain reaction in unrelated 504 volunteers of high tobacco using natives of Gujarat. Allelic frequencies were calculated using Statistical Package for Social Studies-16 software. Hardy Weinberg Equilibrium (HWE) was calculated using Chi square test. Two sided Fisher's significance test was used to compare allelic frequencies of different populations. Results: The frequency of homozygous null genotype of GSTM1 and GSTT1 were 20% (95% CI 16.7-23.9) and 35.5% (95% CI 31.4-39.9) respectively. The GSTM1 and GSTT1 null allele frequency distribution in the Gujarat population was significantly deviating from HWE. GSTT1 null frequency of Gujaratians was significantly higher and different to all reported low tobacco using Indian ethnics, while GSTM1 was not differing significantly. Conclusion: Tobacco usage significantly influences the rate of mutation and frequency of GSTT1 and M1 null types among the habituates. The rate of mutation in GSTT1 loci was an undeviating response to the dose of tobacco usage among the population. This mutational impact of tobacco on GSTT1 postulates the possible gene - environment interaction and selection of null genotype among the subjects to prone them under susceptible status for various cancers and even worst to cure the population with GSTT1 dependent drugs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.11
• /
• pp.6464-6471
• /
• 2014

The UV curing method is a popular process for lens molding on a unit wafer. This process, however, has several drawbacks including wafer adhesion during the ejection process after curing, errors in lens shape and wafer warpage due to material shrinkage during the curing process, and lens centering errors on both sides of a wafer. Among these, the lens shape error and warpage are influenced directly by the UV curing process due to factors including the UV radiation uniformity, the degree of cure according to UV intensity, and the shrinkage characteristics of the material. Therefore, a theory is needed not only to understand the change in the material characteristics, such as the shrinkage rate due to the curing reaction, but also to establish a model. In addition, an analysis system is needed to realize the model. This study proposes a new analysis method for the wafer lens molding process by Comsol modeling. This method was verified by comparing the results with those of the actual process.

• Molecular & Cellular Toxicology
• /
• v.3 no.3
• /
• pp.195-197
• /
• 2007

Currently praziquantel is used for treatment of not only clonorchiasis but also other trematodes and cestodes. But cure rate of praziquantel is just 60-80% for most trematodes. It needs for the treatment-failed patients to have more drugs. The cause of failure of treatment is not studied. We just know that the blood level of praziquantel is severely different among the people. We guess that this factor may influence the results of treatment. In an endemic area of human clonorchiasis in Heilongjiang Providence, China, 78 subjects were selected for the study. Three doses of 25 mg/kg (total 75 mg/kg) of praziquantel were administered to 78 clonorchiasis patients. After three weeks of treatment, stool examination was undertaken once again to confirm the cured and uncured subjects. To analyze SNP (single nucleotide polymorphism) of CYP3A5 PS2-1, CYP3A5 PS2-2, and CYP3A5*6, PCR method was done with specifically designed primers. The mutation rates of all sites were not significant statistically. The number of subjects was too small, so we need more subjects and other delivery proteins of bile ducts (ex. MRP etc.) were also considered for effects of praziquantel. We analyzed, for the first time, the entire CYP3A5 gene in a French population, using a polymerase chain reaction- single strand conformational polymorphism (PCR-SSCP) strategy.

• Clinical and Experimental Pediatrics
• /
• v.56 no.5
• /
• pp.224-226
• /
• 2013

Drug rash with eosinophilia and systemic symptoms (DRESS) syndrome is characterized by a severe idiosyncratic reaction including rash and fever, often with associated hepatitis, arthralgias, lymph node enlargement, or hematologic abnormalities. The mortality rate is approximately 10%, primarily owing to liver failure with massive or multiple disseminated focal necrosis. Here, we report a case of a 14-year-old girl treated with vancomycin because of a wound infection by methicillin-resistant Staphylococcus aureus, who presented with non-specific symptoms, which progressed to acute liver failure, displaying the hallmarks of DRESS syndrome. With the presence of aggravated hepatic encephalopathy and azotemia, the patient was refractory to medical treatments, she received a living-donor liver transplantation, and a cure was achieved without any sign of recurrence. Vancomycin can be a cause of DRESS syndrome. A high index of suspicion and rapid diagnosis are necessary not to miss this potentially lethal disease.

• Journal of Gastric Cancer
• /
• v.22 no.4
• /
• pp.319-338
• /
• 2022

Purpose: Gastric cancer (GC) has high morbidity and mortality, the cure rate of surgical treatment and drug chemotherapy is not ideal. Therefore, development of new treatment strategies is necessary. We aimed to identify the mechanism underlying Sp1 regulation of GC progression. Methods and Methods: The levels of Sp1, β-catenin, SET domain bifurcated 1 (SETDB1), and 15-hydroxyprostaglandin dehydrogenase (HPGD) were detected by quantitative reverse transcription polymerase chain reaction and western blot analysis. The targets of SETDB1 were predicted by AnimalTFDB, and dual-luciferase reporter assay was used for confirming the combination of Sp1, β-catenin, and SETDB1. HGC27 or AGS cells (1×10⁶ cells/mouse) were injected into mice via the caudal vein for GC model establishment. The level of Ki67 was detected using immunohistochemistry, and hematoxylin and eosin staining was performed for evaluating tumor metastasis in mice with GC. Results: HPGD was inhibited, while the protein levels of Sp1, β-catenin, and SETDB1 were up-regulated in GC tissues and cell lines. HPGD overexpression or SETDB1 silencing inhibited the proliferation, invasion, and migration of GC cells, and Sp1 regulated the proliferation, invasion, and migration of GC cells in a β-catenin-dependent manner. Furthermore, HPGD served as a target of SETDB1, and it was negatively regulated by SETDB1; additionally, Sp1 and β-catenin bound to the SETDB1 promoter and negatively regulated HPGD expression. We proved that Sp1 regulated GC progression via the SETDB1/HPGD axis. Conclusions: Our findings revealed that Sp1 transcriptionally inhibited HPGD via SETDB1 in a β-catenin-dependent manner and promoted the proliferation and metastasis of GC cells.