• 충청수학회지
• /
• 제32권2호
• /
• pp.251-260
• /
• 2019

It has been little known when an Artinian (point) quotient has the strong Lefschetz property. In this paper, we find the Artinian complete intersection quotient having the SLP. More precisely, we prove that if ${\mathbb{X}}$ is a complete intersection in ${\mathbb{P}}^2$ of type (2, 2) and ${\mathbb{Y}}$ is a finite set of points in ${\mathbb{P}}^2$ such that ${\mathbb{X}}{\cup}{\mathbb{Y}}$ is a basic configuration of type (2, a) with $a{\geq}3$ or (3, a) with a = 3, 4, 5, 6, then $R/(I_{\mathbb{X}}+I_{\mathbb{Y}})$ has the SLP. We also show that if ${\mathbb{X}}$ is a complete intersection in ${\mathbb{P}}^2$ of type (3, 2) and ${\mathbb{Y}}$ is a finite set of points in ${\mathbb{P}}^2$ such that ${\mathbb{X}}{\cup}{\mathbb{Y}}$ is a basic configuration of type (3, 3) or (3, 4), then $R/(I_{\mathbb{X}}+I_{\mathbb{Y}})$ has the SLP.

• 패션비즈니스
• /
• 제20권4호
• /
• pp.15-35
• /
• 2016

The purpose of this study was to develop brassiere pattern designed to fit the breast shapes based on ESMOD pattern. It has three quarters cup round shape and also consists of three parts; upper cup, lower cup, and wings. Breast types are classified into five shapes; ideal breast, flat breast, upper developed breast, lower developed breast, and projecting breast. Two subjects for each breast type wore the brassiere, and they evaluated the appearance and wearing twice. Type I for research pattern designed to fit into the breast shape reflecting details of breast size were assessed as superior to the divided commercial type. However, wings' tightness of Type I for research pattern brassiere was high. Thus, to improve wearing satisfaction, extra was added to wing. Based on the results of wearing experiments of Type I for research, we adjusted and modified Type II for research pattern. Subsequently, its appearance and wearing were evaluated, in order to be improved. For upper developed breast pattern, we extended the length of lower part to balance upper and lower part, as the upper part was somewhat long. The lower developed breast has the closest feature to the ideal breast, suggestive that implies it does not require much improvement Projecting breast pattern has minimal space in the lower part, so we added the support to lift them to be similar to the ideal breasts. For all the breast shapes, we reduced the wings' tightness from 8% to 7% so that we could extend the length of the wings.

• 한국의류학회지
• /
• 제20권3호
• /
• pp.452-466
• /
• 1996

The purpose of this study is to proviede basic data for designing sports-brassiere by a questionnaire survey about sports-brassieres preferences and physiological wearing test. The results of the survey and the physiological wearing tests on sports-brassieres are as follow; 1. According to the survey, dissatisfied factors on the sports-brassiere are "drooping and vibrating of the breasts". Preferable factors are supporting breasts by stretch and seldom changing its position by motion. The bigger cup-size and more hemispherical-type causes more discontent than flat-type. 2. The shape of breasts is oval, on what ground, horizontal line is longer than vertical. For the cross section of bust line, shirts type.brassiere is more gently curved than cup-brassiere. 3. The feeling of wearing comfort is correlated with bust.up, shield, close adhesion. The vibration of breasts is correlated with covering urea and close adhesion, and the changing band's position by movement, close adhesion. Too much covering area or strain are in inverse correlation of the comfort. 4. The rate of prevention of vibration is 75~80% on superior sports-brassieres, which has broad covering area and excellent close adhesion. adhesion.

• 한국의류학회지
• /
• 제38권6호
• /
• pp.887-895
• /
• 2014

The study provides baseline data on developing ready-to-wear clothes for adult females in their twenties who have finished shaping their bodies and have realized an ideal shape. We analyzed the data from females aged from 20 to 29 in "The $5^{th}$ Size Korea Survey" and "The $6^{th}$ Size Korea Survey", and sorted body shapes into several types according to drop values before analyzing and comparing the characteristics among groups. We also referred to the change by year in the size of upper inner wear. To classify body shapes, three drop values were assigned for bust girth - waist girth, hip girth - waist girth, hip girth - bust girth; through cluster analysis all data were classified into three body types. Type 1 is more like normal body shapes with small drop values at the bust girth - waist girth and well-build lower body. Type 2 is X-shaped body shaped like a fiddle with big drop values at all parts. Type 3 is Y-shaped body with a big drop value at the bust girth - waist girth and well-build upper body. Type 2, X-shaped body, has the majority of distribution in every year, which proved to be the most idealistic body shape. There was a change in the brassiere cup size. Korean ladies in their twenties have larger breasts. The body shapes of Korean females in their twenties are increasingly like those of westerners. Bust girth is a very critical element to set measurements and design patterns for upper wear; consequently, a change in the size of breasts should be considered.

• 한국의류산업학회지
• /
• 제14권6호
• /
• pp.960-967
• /
• 2012

The study aims to design the corset type long-line bra patterns that compensate part-somatotype of women in their 20s. The corset type long-line research bra patterns consist of 4 sections: cup, front bodice, back bodice, and shoulder strap. The full cup is made up of 2 lower part pieces and 1 upper part piece, and the shoulder strap is 16 millimeters wide. The method to design the patterns is shown in figure 4 and figure 5. The result of wearing test showed that, while the wearing testers recognized some significant differences in 19 out of 26 criteria, the examiners did in 17 out of 23. The criteria more than 1 in an average value between research bras and commercial bras were 'appropriateness of breadth of shoulder strap', 'appropriateness of pressure of armhole circumference'. 'appropriateness of pressure of waist', 'suitability of side line and body curve', 'appropriateness of positional pressure of chest circumference', 'appropriateness of positional pressure of upper part line', 'appropriateness of positional pressure of bottom part line', and 'satisfaction of whole silhouette of side and back'. The research and commercial bras were evaluated 4.23 and 3.44 respectively by the testers, and 4.25 and 3.40 by the examiners. The former ones were scored higher by both parties. They were also appreciated higher in general silhouettes of fitting and appearance.

• 한국의학물리학회지:의학물리
• /
• 제33권4호
• /
• pp.108-113
• /
• 2022

Purpose: Proton therapy has been used for optimal cancer treatment by adapting its Bragg-peak characteristics. Recently, a tissue-sparing effect was introduced in ultrahigh-dose-rate (FLASH) radiation; the high-energy transmission proton beam is considered in proton FLASH therapy. In measuring high-energy/ultrahigh-dose-rate proton beam, Faraday Cup is considered as a dose-rate-independent measurement device, which has been widely studied. In this paper, the feasibility of the simply designed Faraday Cup (Poor Man's Faraday Cup, PMFC) for transmission proton FLASH therapy is investigated. Methods: In general, Faraday cups were used in the measurement of charged particles. The simply designed Faraday Cup and Advanced Markus ion chamber were used for high-energy proton beam measurement in this study. Results: The PMFC shows an acceptable performance, including accuracy in general dosimetric tests. The PMFC has a linear response to the dose and dose rate. The proton fluence was decreased with the increase of depth until the depth was near the proton beam range. Regarding secondary particles backscatter from PMFC, the effect was negligible. Conclusions: In this study, we performed an experiment to investigate the feasibility of PMFC for measuring high-energy proton beams. The PMFC can be used as a beam stopper and secondary monitoring system for transmission proton beam FLASH therapy.

• The International Journal of Costume Culture
• /
• 제7권2호
• /
• pp.112-122
• /
• 2004

A brassier supports and protects breasts and makes a better shape of the upper half of the body through shaping breasts. A brassier, therefore, is recognized as the key underwear for female. Recently, the distribution structure and channels of the brassiere industry is diversified from conventional type of markets to department stores, convenience stores, and internet shopping mall. Studies on the sales of brassieres via internet, however, is not sufficient even though the market size has been dramatically increased thursdays. The study on the size structure (including the size and the materials fabric of brassieres circulating via internet) is especially rare. Therefore, this study tries to comply with increasing requests of consumers through comparing brassier brands on internet. In depth, this study compares cases of Korea and Japan in terms of availability of website on sales, quality indication like materials and functions, and size. The results indicated that there were three companies in Korea which run a website and make a sale through a website. All three Japanese companies operate a website and make sales on a website as well. In terms of size, Korean companies diversify their size of products in two ways. It varies from A cup to D cup based on cup size, and 65 to 100 according to its entire size. On the other hand, Japanese companies use AA, A to I to measure cup size, and 65 to 100 for entire size.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.1028-1032
• /
• 1995

This paper describes the manufacture of spherical and aspherical surface on glass, superalloy and ceramic components. The rotationally symmetricallenses, and the ceramic or superalloy molds with spherical shapes are mainly generated by cutting processes on CNC lathe machine or 4,5 axis CNC machining centers. Recently, spherical shape parts require more precise and efficent machining technologies for wide material range such as optical lens of the lithography device in semiconductor manufacturing processes or the high precision mold machining of anti-chemical, anti-wear materials. In this paper, we introduce a newly developed infeed grinding machine with metal with metal bonded cup type wheel and its effects on spherical surface grinding.

• 대한수학회보
• /
• 제49권5호
• /
• pp.1027-1040
• /
• 2012

The aim of this paper is to study the Weyl type-theorems for the orthogonal direct sum $S{\oplus}T$, where S and T are bounded linear operators acting on a Banach space X. Among other results, we prove that if both T and S possesses property ($gb$) and if ${\Pi}(T){\subset}{\sigma}_a(S)$, ${\PI}(S){\subset}{\sigma}_a(T)$, then $S{\oplus}T$ possesses property ($gb$) if and only if ${\sigma}_{SBF^-_+}(S{\oplus}T)={\sigma}_{SBF^-_+}(S){\cup}{\sigma}_{SBF^-_+}(T)$. Moreover, we prove that if T and S both satisfies generalized Browder's theorem, then $S{\oplus}T$ satis es generalized Browder's theorem if and only if ${\sigma}_{BW}(S{\oplus}T)={\sigma}_{BW}(S){\cup}{\sigma}_{BW}(T)$.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.880-883
• /
• 2000

Temperature generated in the workpiece during grinding process can cause thermal damages. Therefore it is important to understand surface temperature generated during grinding process. In this paper, a theoretical and experimental investigation were performed for the grinding temperature. Grinding experiments were performed in machining center using vitrified bonded CBN cup-type wheel. The surface temperature was measured using thermocouple and calculated through a model of the partition of energy between wheel and workpiece. The residual stress and hardness of ground surface were measured. The experimental results indicate that the surface temperature was in good agreement with theoretical ones. Residual stress and hardness of ground surface were more affected by the change of table speed than the depth of cut.